Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZBA3224A
Summary of Contents for Zanussi ZBA3224A
- Page 1 User manual Refrigerator ZBA3224A...
-
Page 2: Table Of Contents
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5... - Page 3 or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5. If the power plug socket is loose, do not insert the power plug.
-
Page 4: Operation
Operation Switching on Insert the plug into the wall socket. Turn the Temperature regulator clockwise to a medium setting. Switching off To turn off the appliance, turn the Temperature regulator to the "O" position. Temperature regulation The temperature is automatically regulated. To operate the appliance, proceed as follows: •... -
Page 5: Helpful Hints And Tips
Movable shelves The walls of the refrigera- tor are equipped with a series of runners so that the shelves can be posi- tioned as desired. Helpful hints and tips Hints for energy saving • Do not open the door frequently or leave it open longer than absolutely necessary. -
Page 6: Care And Cleaning
• it is advisable to show the freezing in date on each individual pack to enable you to keep tab of the storage time. Hints for storage of frozen food To obtain the best performance from this appliance, you should: •... -
Page 7: What To Do If
7. Reload the previously removed food into the com- partment. Important! Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. -
Page 8: Technical Data
Problem Water flows on the ground. The temperature in the appliance is too low. The temperature in the appliance is too high. Replacing the lamp Caution! Disconnect the plug from the mains socket. 1. Remove the screw from the lamp cov- 2. -
Page 9: Installation
The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label. Installation Caution! Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance. Positioning Install this appliance at a location where the ambient tem- perature corresponds to the climate class indicated on the... - Page 10 Ventilation requirements The airflow behind the ap- pliance must be sufficient. Install the appliance in the Adjust the appliance in the niche. niche. Push the appliance in the The lower hinge cover (in direction of the arrows (1) the accessories bag) makes until the upper gap cover sure that the distance be- stops against the kitchen...
- Page 11 Remove the correct part Attach the covers (C, D) to from the hinge cover (E). the lugs and the hinge Make sure to remove the holes. part DX, in the case of right Attach the hinge covers (E) hinge, SX in opposite case. to the hinge.
-
Page 12: Environmental Concerns
Reversibility of the freezer door 180˚ Environmental concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. - Page 16 www.zanussi.com...