• Some parts of the appliance carry current. Close the appliance with furniture and make sure that there are no free spaces. It prevents electrical shock because you cannot accidentally touch dangerous parts. www.zanussi.com...
Page 3
There is the risk of explosion or fire. • The interior of the appliance becomes hot during use. There is the risk of burns. Do not touch the heating ele- www.zanussi.com ments in the appliance. Use gloves when you insert or remove the accessories or pots.
• Standard deep grill/roasting pan To bake and roast or as a pan to collect fat. • Grill trivet To roast and grill. Use the trivet only with the roasting pan. Initial cleaning • Remove all accessories and removable shelf supports (if applicable). www.zanussi.com...
Warning! Be careful when you remove the accessories from a hot appliance. There is a risk of burns. To grill flat food items and to make toast: www.zanussi.com Let the appliance operate for 45 minutes. Set the function Let the appliance operate for 15 minutes.
(heat setting, cooking time, etc.) for your cookware, recipes and quantities when you use this appli- ance. Cooking time [min] Temp [°C] 45-60 20-30 70-80 Notes In a cake mould In a cake mould In a 26 cm cake mould on a wire shelf www.zanussi.com...
Shelf posi- tion White bread Rye bread Pizza Scones 1) Preheat for 10 minutes. FLANS Conventional Cooking TYPE OF DISH Shelf posi- tion Pasta flan www.zanussi.com Cooking time [min] Temp [°C] 80-100 60-80 30-40 50-60 90-120 50-60 20-30 30-35 80-100...
Page 8
On a wire shelf On a wire shelf On a wire shelf On a wire shelf On a wire shelf On a wire shelf With rind Two pieces Whole Whole Whole Whole Cut in pieces Cut in pieces Whole www.zanussi.com...
• To clean metal surfaces use a usual cleaning agent. • Clean the oven interior after each use. Then you can re- move dirt more easily and it does not burn on. • Clean stubborn dirt with a special oven cleaner. www.zanussi.com Cooking time [min] Temp [°C]...
Page 10
Release the locking system to remove the in- by 90° and remove them ternal glass panel. from their seats. Lift and turn the levers Put the door on a soft 90° Turn the two fasteners www.zanussi.com...
We recommend that you write the data here: Model (MOD.) Product number (PNC) Serial number (S.N.) www.zanussi.com The screen-printing zone must face the inner side of the door. Make sure that after the installation the surface of the glass panel frame on the screen-printing zones is not rough when you touch it.
For more detailed www.zanussi.com Min. size Cable/flex PVC/PVC twin and earth information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.