hit counter script
Yamaha RX-V1300 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Receiver
  5. RX-V1300
  6. Owner's manual
Yamaha RX-V1300 Owner's Manual

Yamaha RX-V1300 Owner's Manual

Yamaha av receiver owner's manual
Hide thumbs Also See for RX-V1300:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
RX-V1300
AV Receiver
OWNER'S MANUAL
IMPORTANT
Please record the serial number of this unit in the
space below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner's Manual in a safe place for future
reference.
U

Advertisement

Table of Contents
loading

Related Manuals for Yamaha RX-V1300

Summary of Contents for Yamaha RX-V1300

  • Page 1 RX-V1300 AV Receiver OWNER’S MANUAL IMPORTANT Please record the serial number of this unit in the space below. MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous...
  • Page 3 This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables.
  • Page 4 YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

  • Page 5: Table Of Contents

    INTRODUCTION INTRODUCTION CONTENTS ... 1 FEATURES ... 2 GETTING STARTED ... 3 Checking the Package Contents ... 3 Installing Batteries in the Remote Control ... 3 CONTROLS AND FUNCTIONS ... 4 Front Panel ... 4 Remote Control ... 6 Using the Remote Control ... 7 Front Panel Display ...

  • Page 6: Features

    N Dolby Pro Logic/Dolby Pro Logic N Dolby Digital/Dolby Digital EX Decoder N DTS/DTS ES Matrix 6.1, Discrete 6.1, DTS Neo: 6 Decoder N CINEMA DSP: Combination of YAMAHA DSP Technology and Dolby Pro Logic, Dolby Digital or DTS N Virtual CINEMA DSP...

  • Page 7: Getting Started

    Checking the Package Contents Check your package to make sure it has the following items. Remote control TRANSMIT RE–NAME CLEAR LEARN SYSTEM POWER STANDBY SLEEP 6CH INPUT PHONO TUNER V-AUX CBL/SAT MD/TAPE CD-R D-TV/LD VCR 1 VCR2/DVR SELECT POWER POWER AUDIO DISC SKIP –...

  • Page 8: Controls And Functions

    CONTROLS AND FUNCTIONS Front Panel NATURAL SOUND AV RECEIVER STANDBY INPUT MODE SPEAKERS BASS PROCESSOR EXTENSION DIRECT STANDBY/ON Turns on and sets this unit in the standby mode. When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before this unit can reproduce sound.
  • Page 9 STEREO/EFFECT Switches the normal stereo or DSP effect reproduction. When STEREO is selected, 2-channel input signals are directed to the main left and right speakers without effect sounds. All Dolby Digital and DTS audio signals except for the LFE channel are mixed down to the main left and right speakers.

  • Page 10: Remote Control

    CONTROLS AND FUNCTIONS Remote Control This section describes the controls and their functions of the remote control to operate this unit. Functions written in yellow are to operate this unit. Make sure that the AMP mode is selected before operating this unit. The functions written in green and white vary depending on the input source selected.

  • Page 11: Using The Remote Control

    o SELECT k/n Selects the another component to control independently from the input that has been selected by pressing an input selector button. p AV POWER Turns on and off the power of the component selected by the input selector button. a AMP Selects AMP or other component selected by the input selector button.

  • Page 12: Front Panel Display

    CONTROLS AND FUNCTIONS Front Panel Display V AUX VCR2/DVR DTS Neo DISCRETE MATRIX MOVIE TV THEATER VIRTUAL DIGITAL SILENT PRO LOGIC indicator Lights up when you select a digital sound field program. 2 Decoder indicators When any of the decoders equipped on this unit functions, the indicator lights up.

  • Page 13: Rear Panel

    Rear Panel DIGITAL OUTPUT AUDIO AUDIO VIDEO OPTICAL VIDEO MD/TAPE (PLAY) MD/TAPE CD-R D-TV (REC) (PLAY) /SAT CD-R CD-R (REC) VCR 1 /SAT PHONO VCR 2 /DVR MAIN SURROUND D-TV ZONE 2 OUT COAXIAL MONITOR OUT CENTER WOOFER VIDEO S VIDEO DIGITAL INPUT 6CH INPUT...

  • Page 14: Preparation

    LFE (low-frequency effect) channel with high fidelity when the Dolby Digital signal or the DTS signal is played back. The YAMAHA Active Servo Processing Subwoofer System is ideal for natural and lively bass reproduction. SPEAKER SETUP...

  • Page 15: Connecting The Speakers

    Connecting the Speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.
  • Page 16 I SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack if they are assigned to this jack.

  • Page 17: Impedance Selector Switch

    I IMPEDANCE SELECTOR switch WARNING Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise this unit may be damaged. If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR switch may not be fully slid to either position.

  • Page 18: Connections

    Before Connecting Components CAUTION Never connect this unit and other components to mains power until all connections between components have been completed. • Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”.
  • Page 19 OPTICAL OUTPUT AUDIO OUTPUT AUDIO AUDIO DIGITAL OUTPUT OPTICAL MD/TAPE ( PLAY ) MD/TAPE CD-R ( REC ) ( PLAY ) CD-R CD-R ( REC ) /SAT PHONO MAIN SURROUND D-TV COAXIAL CENTER WOOFER DIGITAL INPUT 6CH INPUT AUDIO OUTPUT COAXIAL OUTPUT indicates signal direction indicates left audio pin cables...
  • Page 20 CONNECTIONS DIGITAL OUTPUT OPTICAL MD/TAPE ( PLAY ) MD/TAPE CD-R ( REC ) ( PLAY ) CD-R CD-R ( REC ) /SAT PHONO MAIN SURROUND D-TV COAXIAL CENTER DIGITAL INPUT 6CH INPUT VIDEO OUTPUT VCR 1 or VCR 2/ AUDIO INPUT DVR (digital video recorder) AUDIO OUTPUT...

  • Page 21: Connecting Audio Components

    Connecting Audio Components I Connecting to digital jacks This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. When you connect components to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack.
  • Page 22 CONNECTIONS OPTICAL INPUT OPTICAL OUTPUT CD player OUTPUT COAXIAL OUTPUT (U.S.A. and Canada models) OUTPUT Turntable indicates signal direction indicates left audio pin cables indicates right audio pin cables indicates optical cables indicates coaxial cables INPUT MD recorder or tape deck OUTPUT DIGITAL OUTPUT AUDIO...

  • Page 23: Connecting The Antennas

    AM antenna is connected to this unit. A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas. CONNECTIONS...

  • Page 24: Connecting To An External Amplifier

    Rear channel line output jacks. SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack if they are assigned to this jack.

  • Page 25: Connecting The Power Supply Cords

    Connecting the Power Supply Cords AC IN AC OUTLETS EDANCE SELECTOR T BEFORE POWER ON A OR B: 4ΩMIN. /SPEAKER A+B: 8ΩMIN. /SPEAKER 6ΩMIN. /SPEAKER CENTER : 6ΩMIN. /SPEAKER 6ΩMIN. /SPEAKER AIN A OR B: 8ΩMIN. /SPEAKER ENTER 8ΩMIN. /SPEAKER EAR CENTER : 8ΩMIN.

  • Page 26: Turning On The Power

    CONNECTIONS Turning on the Power When all connections are completed, turn on the power of this unit. NATURAL SOUND AV RECEIVER D I G I T A L STANDBY INPUT MODE PRESET/ PRESET TUNING A/B/C/D/E TUNING /TUNING FM/AM MEMORY MODE TUNER SPEAKERS BASS...

  • Page 27: On-Screen Display (Osd)

    ON-SCREEN DISPLAY (OSD) You can display the operation information for this unit on a video monitor. If you display the SET MENU and DSP program parameter settings on a monitor, it is much easier to see the available options and parameters than it is by reading this information on the front panel display.

  • Page 28: Speaker Mode Settings

    This unit has 6 SPEAKER SET items on the SET MENU that you must set according to the number of speakers in your configuration and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings as well as other possible settings.

  • Page 29: Adjusting The Speaker Output Levels

    ADJUSTING THE SPEAKER OUTPUT LEVELS This section explains how to adjust the speaker output levels by using the test tone generator. When this adjustment is made, the output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor, and various decoders (Dolby Digital, Dolby Pro Logic, Dolby Pro Logic , DTS, DTS ES, and...
  • Page 30 ADJUSTING THE SPEAKER OUTPUT LEVELS LEFT RIGHT CENTER SUBWOOFER LEFT SURROUND RIGHT SURROUND REAR CENTER The test tone is heard from the left main speaker, center speaker, right main speaker, right rear speaker, rear center and left rear speaker in order. The tone is produced for 2.5 seconds each time.

  • Page 31: Basic Playback

    NATURAL SOUND AV RECEIVER D I G I T A L STANDBY INPUT MODE PRESET/ PRESET TUNING A/B/C/D/E TUNING /TUNING FM/AM MEMORY MODE TUNER SPEAKERS BASS PROCESSOR EDIT MAN'L/AUTO FM AUTO/MAN'L MONO EXTENSION DIRECT PHONES S VIDEO VIDEO AUDIO STEREO PROGRAM EFFECT SILENT...

  • Page 32: This Unit

    BASIC PLAYBACK Start playback or select a broadcast station on the source component. Refer to the operation instructions for the component. Note • If you playback a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals.

  • Page 33: Input Modes And Indications

    Input Modes and Indications This unit comes with various input jacks. You can set the priority of the input signal among different types of input signals. Press MODE (the input selector button that you have pressed to select the input source on the remote control) repeatedly until the desired input mode is shown on the front panel display and on the video monitor.

  • Page 34: Selecting A Sound Field Program

    BASIC PLAYBACK Selecting a Sound Field Program You can enhance your listening experience by selecting a DSP program. There are 10 programs with sub-programs available with this unit. However the selection depends on the input signal format and not all the sub-programs are possible for all input signal formats.

  • Page 35: Selecting Pro Logic, Pro Logic Or Neo: 6

    Selecting PRO LOGIC, PRO LOGIC or Neo: 6 You can enjoy the 2-channel sources decoded into five or six discrete channels by selecting PRO LOGIC 6 in the program No. 10. NATURAL SOUND AV RECEIVER D I G I T A L STANDBY INPUT MODE...
  • Page 36 BASIC PLAYBACK I Playing the Dolby Digital EX or DTS ES software Press EX/ES to turn on the Dolby Digital EX or DTS ES decoder to listen to the Dolby Digital EX and DTS ES software with a rear center speaker. The display changes AUTO →...

  • Page 37: Normal Stereo Reproduction

    I Normal Stereo Reproduction Press STEREO/EFFECT to turn off the sound effect for normal stereo reproduction. Press STEREO/EFFECT again to turn the sound effect back on. STEREO EFFECT Front panel Remote control Notes • If “1B MAIN SP” on the SET MENU is set to “SMALL” and “1E LFE/BASS OUT”...

  • Page 38: Digital Sound Field Processing (Dsp)

    The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound field. YAMAHA’s DSP requires four effect speakers to recreate sound fields based on the measured sound field data. The processor controls the strength and delay time of the signals output from the four effect speakers to localize the virtual sound sources in a full circle around the listener.

  • Page 39: Straight Decode

    They also provide two modes; MOVIE/CINEMA for movies and MUSIC for 2-channel sources. DIGITAL SOUND FIELD PROCESSING (DSP) These programs use YAMAHA’s tri-field DSP processing on each of the Dolby Digital or DTS signals for the front, left surround and right surround channels.

  • Page 40: Features Of Dsp Programs

    DIGITAL SOUND FIELD PROCESSING (DSP) Features of DSP Programs The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. Type of Program sources...
  • Page 41 Type of Program sources MOVIE THEATER 1 MOVIE THEATER 2 For movie programs DOLBY DIGITAL DTS DIGITAL PROLOGIC DOLBY DIGITAL DTS DIGITAL PRO LOGIC PRO LOGIC DTS Neo:6 DIGITAL SOUND FIELD PROCESSING (DSP) Sub program Spectacle This program creates the extremely wide sound field of a 70-mm movie theater.

  • Page 42: Table Of Program Names For Each Input Format

    DIGITAL SOUND FIELD PROCESSING (DSP) Table of Program Names for Each Input Format Input 2 channel Stereo Program MOVIE 70 mm Spectacle THEATER 1 70 mm Sci-Fi MOVIE 70 mm Adventure THEATER 2 70 mm General DOLBY — DIGITAL — DTS DGTL —...

  • Page 43: Tuning

    Automatic and Manual Tuning There are 2 ways of tuning; automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. I Automatic tuning NATURAL SOUND AV RECEIVER D I G I T A L STANDBY INPUT MODE...

  • Page 44: Presetting Stations

    TUNING Presetting Stations I Automatically presetting stations (for FM stations) You can use the automatic preset tuning feature to store FM stations. This function enables this unit to automatically tune in to FM stations with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order.
  • Page 45 I Manually presetting stations You can also store up to 40 stations (8 stations x 5 groups) manually. NATURAL SOUND AV RECEIVER D I G I T A L STANDBY INPUT MODE PRESET/ PRESET TUNING A/B/C/D/E TUNING /TUNING FM/AM MEMORY MODE TUNER SPEAKERS...

  • Page 46: Tuning In To A Preset Station

    TUNING Tuning in to a Preset Station You can tune any desired station simply by selecting the preset station number under which it was stored. NATURAL SOUND AV RECEIVER D I G I T A L STANDBY INPUT MODE PRESET/ PRESET TUNING A/B/C/D/E...

  • Page 47: Basic Recording

    Recording adjustments and other operations are performed from the recording components. Refer to the operation instructions for these components. NATURAL SOUND AV RECEIVER D I G I T A L STANDBY INPUT MODE PRESET/ PRESET TUNING A/B/C/D/E TUNING /TUNING FM/AM MEMORY MODE TUNER...

  • Page 48: Remote Control Features

    REMOTE CONTROL FEATURES The remote control can operate other A/V components of YAMAHA and other manufacturers as well as this unit. To control those components, you must set up remote control with the manufacturer codes. This remote control also has a sophisticated Learn feature. The Learn feature allows it to acquire functions from the remote controls of other components in your system (or other household appliances) equipped with an infrared remote control receiver.

  • Page 49: Setting The Manufacturer Code

    VCR 1 VCR 2/DVR Note • You may not be able to operate your Yamaha component even if Yamaha manufacture code is initially set as listed above. In this case, try to set other Yamaha manufacture code(s). Press an input selector button or select the component you want to set up.
  • Page 50 • Supplied remote control does not store all the manufacturer codes for commercially availabvle AV components (including Yamaha AV components). Therefore it may not work to operate your AV component. If operation is not possible with any of the manfacturer codes, program the new remote control function with the Learn feature (see page 47) or use the remote control for the component.

  • Page 51: Learn Feature

    Learn Feature If you want to program functions not included in the basic operations covered by the manufacturer code, or a manufacturer code is not available, the following procedure needs to be performed. The possible programming area is the same as a component control area, so the buttons are programmable independently for each source component area.

  • Page 52: Changing The Source Name In The Display Window

    REMOTE CONTROL FEATURES I Clearing a new remote control function You can clear the function learned in a certain programmable button in each area. Press an input selector button or select the source component you want to do “One Button Clear”. The selected component name appears in the display window.

  • Page 53: Clearing Learned Functions, Renamed Source Names, And Setup Manufacturer Codes

    Clearing Learned Functions, Renamed Source Names, and Setup Manufacturer Codes You can clear learned functions, renamed source names and set up manufacture codes. You can also revert the remote control to the factory setting. Press CLEAR by using a ballpoint pen or similar object.

  • Page 54: Each Component Control Area

    REMOTE CONTROL FEATURES Each Component Control Area The general operational buttons are shown for each area. Some of them may not function depending on the component you have. After setting the manufacturer code, press an input selector button or component you want to control. I Operating a DVD player (DVD area) TRANSMIT...
  • Page 55 I Operating a TV/digital TV (D-TV/ LD area) or a cable TV/satellite TV (CBL/SAT area) TRANSMIT RE–NAME CLEAR LEARN SYSTEM POWER STANDBY SLEEP 6CH INPUT PHONO TUNER V-AUX CBL/SAT MD/TAPE CD-R D-TV/LD VCR 1 VCR2/DVR SELECT POWER POWER POWER (Pause) (Record) AUDIO DISC SKIP...
  • Page 56 REMOTE CONTROL FEATURES I Operating a CD player (CD area) TRANSMIT RE–NAME CLEAR LEARN SYSTEM POWER STANDBY SLEEP 6CH INPUT PHONO TUNER V-AUX CBL/SAT MD/TAPE CD-R D-TV/LD VCR 1 VCR2/DVR SELECT POWER POWER Pause DISC SKIP AUDIO DISC SKIP (CD changer) Skip backward –...
  • Page 57 I Operating a tape deck (MD/TAPE area) TRANSMIT RE–NAME CLEAR LEARN SYSTEM POWER STANDBY SLEEP 6CH INPUT PHONO TUNER V-AUX CBL/SAT MD/TAPE CD-R D-TV/LD VCR 1 VCR2/DVR SELECT POWER POWER Pause Record AUDIO DISC SKIP Direction A – Search backward LEVEL SET MENU MUTE...
  • Page 58 YAMAHA LD player is factory-set in you want to set other component, set the manufacturer code for the component you want to set in the following the manufacturer code setting procedure described on page 45.

  • Page 59: Set Menu

    ADVANCED OPERATION The SET MENU consists of 15 items including the speaker mode setting, center graphic equalizer and parameter initialization features. Choose the appropriate item and adjust or select the values as necessary. • You can adjust the items on the SET MENU while playing a source.

  • Page 60: Speaker Set (Speaker Mode Settings)

    SET MENU Press j / i once to enter the setup mode of the selected item. The last setting you adjusted appears on the video monitor or on the front panel display. TV VOL TV MUTE – SELECT PRESET PRESET TV VOL –...
  • Page 61 I 1B MAIN SP (main speaker mode) The OSD shows large or small main speakers depending on how you set this item. Choices: LARGE, SMALL Initial setting: LARGE LARGE Select this if you have large main speakers. The entire range of the left and right main channel signal is directed to the left and right main speakers.
  • Page 62 SET MENU I 1D REAR CT SP (rear center speaker mode) By adding a rear center speaker to your speaker configuration, this unit can provide more realistic front- to-back and transitions. The initial setting is “LRG”. Note • If “1C REAR L/R SP” is set to NONE, “1D REAR CT SP” will be skipped.

  • Page 63: Low Frq Test

    I 1F MAIN LEVEL (main level mode) Change this setting if you cannot match the output level of the center, rear (L/R) and rear center speakers with the main speakers because of the unusually high-efficiency performance of the main speakers. Choices: Normal, –10 dB Initial setting: Normal Normal...

  • Page 64: R Balance (Balance Of The Left And Right Main Speakers)

    SET MENU Press d to go to “FRQ” and press j / i to select the frequency you want to use. Adjust the volume of the subwoofer with the controls on the subwoofer so it matches that of the speaker you are comparing it to. I About the test tone The test tone is produced by the tone generator.

  • Page 65: Input Rename

    6 INPUT RENAME Use this feature to change the name of the input which appears on the OSD or the front panel display. Press an input selector button (or use INPUT) to select the input you want to change the name of. Press AMP to select the AMP mode.

  • Page 66: Input Mode (Initial Input Mode)

    SET MENU I 7C OPTICAL IN for OPTICAL INPUT jacks (3) to (6) Choices: (3) CD, PHONO, VCR 2/DVR, VCR 1, CBL/SAT, D-TV/LD, DVD, MD/ TAPE, CD-R (4) CD-R, CD, PHONO, VCR 2/DVR, VCR 1, CBL/SAT, D-TV/LD, DVD, MD/TAPE (5) DVD, MD/TAPE, CD-R, CD, PHONO, VCR 2/DVR, VCR 1, CBL/ SAT, D-TV/LD (6) CBL/SAT, D-TV/LD, DVD, MD/...

  • Page 67: Param. Ini (Parameter Initialization)

    9 PARAM. INI (parameter initialization) Use this feature to initialize the parameters for each DSP program within a DSP program group. When you initialize a DSP program group, all of the parameter values within that group revert to their initial settings. Press the corresponding numeric button for the DSP program that you want to initialize.

  • Page 68: 12Sp Delay

    SET MENU 12 SP DELAY Use this feature to adjust the delay of the Center and the Rear Center channel sounds. This feature works when there is sound output from the center speakers with a source like Dolby Digital or DTS, etc. Ideally, the Center speaker and the Rear Center speaker should be the same distance from the main listening position as the left and right Main speakers.

  • Page 69: 13Display Set

    13 DISPLAY SET I DIMMER You can adjust the brightness of the front panel display. Control range: –4 to 0 Initial setting: 0 I OSD SHIFT (OSD off-set position) This setting is used to adjust the vertical position of the OSD.

  • Page 70: Adjusting The Level Of The Effect Speakers

    ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS You can adjust the output level of each effect speaker (center, left and right rear and subwoofer) while listening to a music source. Adjustment should be made with the remote control. TRANSMIT RE–NAME CLEAR LEARN SYSTEM...

  • Page 71: Sleep Timer

    Use this feature to automatically set this unit in the standby mode after the amount of time you have set. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off the external components connected to AC OUTLET(S).

  • Page 72: Zone 2

    REMOTE CONTROL OUT • Some YAMAHA models are able to connect directly to the REMOTE CONTROL OUT jack of this unit. If you own these products, you may not need to use an infrared emitter. Up to 6 This unit YAMAHA components can be connected as shown.

  • Page 73: Remote Control In Zone 2

    I Special considerations when using DTS software The DTS signal is a digital bitstream. Therefore, if you attempt to send the DTS signal to the second room, you will only be able to hear the digital noise sound that could damage your speakers.

  • Page 74: Sound Field Program Parameter Editing

    In each program, these parameters are set with values precisely calculated by YAMAHA to create a sound field unique to the program. It is recommended to use DSP programs without changing the values of parameters; however, this unit also allows you to create your own sound fields.

  • Page 75: Changing Parameter Settings

    Changing Parameter Settings You can enjoy good quality sound with the factory-set parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room. Adjustments should be made with the remote control.

  • Page 76: Digital Sound Field Parameter Descriptions

    DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your listening room. Not all of the following parameters are found in every program. I DSP LEVEL Function: This parameter adjusts the level of all the DSP effect sounds within a narrow range.
  • Page 77 I LIVENESS Function: This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early reflections decay. Description: The early reflections of a sound source decay much faster in a room with acoustically absorbent wall surfaces than in one which has highly reflective surfaces.
  • Page 78 DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS I REV. TIME (Reverberation Time) Function: This parameter adjusts the amount of time it takes for the dense, subsequent reverberation sound to decay by 60 dB (at 1 kHz). This changes the apparent size of the acoustic environment over an extremely wide range.
  • Page 79 For 6ch Stereo I CT LEVEL (Center Level) Function: These parameters adjust the volume level for each channel in 6-channel stereo mode. I RL LEVEL (Rear Left Level) Function: These parameters adjust the volume level for each channel in 6-channel stereo mode. I RR LEVEL (Rear Right Level) Function: These parameters adjust the volume level for each channel in 6-channel stereo mode.

  • Page 80: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit in the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. I General...
  • Page 81 Problem The sound suddenly The protection circuit has been activated goes off. because of a short circuit, etc. The sleep timer has functioned. The sound is muted. Only the speaker on Incorrect cable connections. one side can be heard. Incorrect setting of “3 L/R BALANCE” on the SET MENU.
  • Page 82 TROUBLESHOOTING Problem Dolby Digital or DTS “Digital output” and “Dolby Digital” or sources cannot be “DTS” are not selected on the connected played. (Dolby Digital or components. DTS indicator on the front panel display does not light up.) Poor bass “1E LFE/BASS OUT”...
  • Page 83 Problem The sound is degraded This unit is in the standby mode. when listening with headphones connected to a tape deck or CD player that is connected to this unit. There is noise This unit is too close to the digital or high- interference from digital frequency equipment.
  • Page 84 TROUBLESHOOTING I Remote control Problem The remote control Wrong distance or angle. does not work nor function properly. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. The batteries are weak. The manufacturer code has not been correctly set.

  • Page 85: Glossary

    Based on a wealth of actually measured data, YAMAHA CINEMA DSP uses YAMAHA original sound field technology to combine Dolby Pro Logic, Dolby Digital and DTS systems to provide the visual and audio experience of movie theater in the listening room of your own home.

  • Page 86: Virtual Cinema Dsp

    GLOSSARY I Virtual CINEMA DSP YAMAHA has developed a virtual CINEMA DSP algorithm that allows you to enjoy DSP sound field surround effects even without any rear speakers by using virtual rear speakers. It is even possible to enjoy virtual CINEMA DSP in a minimum two-speaker system that does not include a center speaker.

  • Page 87: Specifications

    AUDIO SECTION • Minimum RMS Output Power for Main, Center, Rear 20 Hz to 20 kHz, 0.04% THD, 8 Ω ... 100 W • Maximum Power (EIAJ) [China and General models] 1 kHz, 10% THD, 8 Ω ... 150 W •...
  • Page 88 YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN Printed in Malaysia V958210-3 YAMAHA MUSIC AUSTRALIA PTY, LTD.

Table of Contents