Table of Contents
Advertisement
Connecting Speakers
Subwoofer connection
If you have a subwoofer with built-
in amplifier, including the
YAMAHA Active Servo Processing
Subwoofer System, connect the
input terminal of the subwoofer
system to the SUBWOOFER
OUTPUT terminal of this unit.
Be sure to connect the right channel (R), left channel (L),
"+" (red) and "–" (black) properly. If the connections are
faulty, no sound will be heard from the speakers, and if the
polarity of the speaker connections is incorrect, the sound
will be unnatural and lack bass.
CAUTIONS
• Use speakers with the specified impedance shown on
the rear panel of this unit.
• Do not let the bare speaker wires touch each other and
do not let them touch any metal part of this unit. This
could damage the unit and/or speakers.
Main speakers A
Right
+
Center speaker
Left
Right
–
–
+
L
R
MAIN
A
B
SET BEFORE POWER ON
REAR
MAIN A OR B : 4 MIN. /SPEAKER
R
L
CENTER
(SURROUND)
A + B : 8 MIN. /SPEAKER
CENTER
: 6 MIN. /SPEAKER
REAR
: 6 MIN. /SPEAKER
+
+
MAIN A OR B : 8 MIN. /SPEAKER
A + B : I6 MIN. /SPEAKER
CENTER
: 8 MIN. /SPEAKER
REAR
: 8 MIN. /SPEAKER
–
–
Right
Rear speakers
Main speaker terminals
One or two speaker systems can be connected to these
terminals. If you use only one speaker system, connect it to
either of the SPEAKERS A or B terminals.
Rear speaker terminals
A rear speaker system can be connected to these terminals.
Center speaker terminal
A center speaker can be connected to this terminal.
CONNECTIONS
Main speakers B
Left
(U.S.A. model)
MAINS
120 V 60Hz
100W MAX. TOTAL
SWITCHED
Left
15
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
