Table of Contents
Advertisement
SET MENU
6
Press j / i once to enter
the setup mode of the
selected item.
The last setting you adjusted
appears on the front panel
display.
Depending on the menu item,
press u/d to select a sub
item.
7
Press j / i repeatedly to
change the menu item
setting.
8
To exit, press u / d repeatedly until the
menu disappears or just press one of the
sound field program group buttons.
–
+
SELECT
PRESET/CH
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than
one week, the stored data will be lost. If this happens,
adjust the items again.
The BASIC and SOUND menus
The "BASIC" menu allows you to easily set the
"SOUND 1 SPEAKER SET" and "SOUND 2 SP
DISTANCE" parameters. It is not necessary to reset
any of the parameters in the "BASIC" menu, but you
can access more detailed parameters in the "SOUND"
menu if you wish.
Note
• After altering parameters in the "SOUND" menu, if you
select "BASIC 1 SETUP" and then select "SET", the
parameters from the "SOUND" menu alter in response to
any changes you make in "BASIC 1 SETUP". Do not enter
the "BASIC 1 SETUP" menu unless you wish to change
these settings. If you accidentally enter the "BASIC 1
SETUP" menu, select CANCEL to return to the "BASIC"
menu. (page 19)
38
–
SELECT
PRESET/CH
–
SELECT
PRESET/CH
–
SELECT
PRESET/CH
HALL
JAZZ
ROCK
ENTERTAINMENT
1
2
3
4
MUSIC
TV THTR
MOVIE1
MOVIE2
or
5
6
7
8
/DTS
NIGHT
6.1/5.1
STEREO
9
0
+10
ENTER
SOUND 1 SPEAKER SET
+
(speaker mode settings)
Use this feature to select suitable output modes for your
speaker configuration.
Note
• Some menu item settings have no effect when the unit is
+
reproducing a source with a digital signal sampling frequency
greater than 48 kHz.
I 1A CENTER (center speaker mode)
If you add a center speaker to your speaker configuration,
+
this unit can provide better dialog localization for several
listeners and superior synchronization of sound and
images.
Choices: LRG (large), SML (small), NON (none)
LRG
Select this if you have a large center speaker. The unit
directs the entire range of the center channel signal to the
center speaker.
SML
Select this if you have a small center speaker. The unit
directs the low-frequency signals (90 Hz and below) of
the center channel to the speakers selected with "1D
BASS".
NON
Select this if you do not have a center speaker. The unit
directs all of the center channel signal to the front left and
right speakers.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
