hit counter script
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Musical Instrument
  5. CP5
  6. Reference manual

Mic Input Part (Cp5 Only) - Yamaha CP5 Reference Manual

Yamaha electronic keyboard user manual
Hide thumbs Also See for CP5:
Table of Contents

Advertisement

MIC INPUT Part (CP5 only)

This section provides a detailed description of the parameters used to configure the CP5's MIC
INPUT part. The setting screen for this part contains two pages.
Press and hold the [MIC INPUT] button (for at least one second)
Edit Sequence
required page using the [
On-screen name
Page
(and full name)
1
Volume
Pan
RevSend (Reverb
Send)
2
MicFx (Mic Effects)
MicIns (Mic Insert
Effect)
Mic Effects Screen
From the Mic Effects screen, you can set parameters affecting the compressor, noise gate, and EQ
that act on audio signals input via the MIC INPUT jack. This screen contains a total of seven pages.
Press and hold the [MIC INPUT] button (for at least one second)
Edit Sequence
using the [PAGE
[
PAGE] and [PAGE
L
On-screen name
Page
(and full name)
1
NoiseSw
(Noise Gate Switch)
CompSw
(Compressor Switch)
2
NoisAtk
(Noise Gate Attack)
NoisRel
(Noise Gate
Release)
NoisTh
(Noise Threshold)
3
CompAtk
(Compressor Attack)
CompRel
(Compressor
Release)
40
CP5/CP50 Reference Manual
PAGE] and [PAGE
L
This parameter is used to adjust the part's output level. It can also be set at any
time using the [MIC INPUT] knob on the control panel.
Setting values: 0 to 127
This parameter is used to adjust the part's stereo panning.
Setting values: L63 (far left) to C (center) to R63 (far right)
This parameter is used to set how much of the part's output signal is sent to the
Reverb block. Higher values produce a more pronounced reverb sound.
Setting values: 0 to 127
By pressing Knob 1 on this page, you can open the Mic Effects screen (see
below) in order to configure the compressor, noise gate, and EQ that act on the
microphone input.
By pressing Knob 2 on this page, you can open the Mic Insert Effect screen
(page 41) in order to select and configure an insertion effect for the microphone
input.
] button
Press Knob 1
R
] buttons
Turn Knobs 1 to 3
R
This parameter is used to turn on or off the noise gate for microphone input signals.
Setting values: on or off
This parameter is used to turn on or off the compression of microphone input sig-
nals.
Setting values: on or off
This parameter is used to set the amount of time that elapses between arrival of an
input signal and activation of the noise gate.
Setting values: 1ms to 40ms
This parameter is used to set the amount of time over which the noise gate stops
silencing the input signal.
Setting values: 10ms to 680ms
This parameter is used to set the level at which the noise gate starts silencing the
input signal.
Setting values: -73dB to -30dB
This parameter is used to set the amount of time that elapses between arrival of an
input signal and activation of the compressor.
Setting values: 1ms to 40ms
This parameter is used to set the amount of time over which the compressor stops
compressing the sound.
Setting values: 10ms to 680ms
Navigate to the
] buttons
Turn or press Knobs 1 to 3
R
Description
Navigate to Page 2
Navigate to the required page using the
Description
Internal Design of the CP5 & CP50
Reference
Left & Right Parts
R
[VOICE]
R
[PRE-AMP]
R
[MOD-FX]
R
[PWR-AMP] (CP5 only)
R
[LEFT1]/[LEFT2]/[RIGHT1]/
[RIGHT2] (CP5)
[LEFT]/[RIGHT] (CP50)
R
[COMMON]
Song Setting Area
R
[SONG SETTING]
[RECORD]
R
TRACK Part
R
[TRACK]
MIC INPUT Part
[MIC INPUT] (CP5 only)
R
Settings for All Parts
R
[REVERB]
Settings for All Performances
[MASTER COMPRESSOR]
R
R
[UTILITY]
R
[FILE]
Appendix
Show Quick Links

Hide quick links:

Advertisement

Table of Contents
loading

Related Manuals for Yamaha CP5

Related Content for Yamaha CP5

This manual is also suitable for:

Cp50

Table of Contents