Packet Processing Card Run/Fail Led States - Cisco ASR 5000 Installation Manual
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (294 pages) ,
- Installation procedure (8 pages)
Table of Contents
Advertisement
Troubleshooting
Checking the LEDs on the Packet Processing Cards
• Service
Figure 3: Packet Processing Card LEDs
The possible states for all packet processing card LEDs are described below.
Packet Processing Card Run/Fail LED States
The packet processing card Run/Fail LED indicates the overall status of the card. This LED should be green
for normal operation.
The possible states for this LED are described in the following table. If the LED is not green, use the
troubleshooting information in the table to diagnose the problem.
ASR 5000 System Administration Guide, StarOS Release 21.2
9
Advertisement
Table of Contents
