FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2
For your information
This operation guide contains important information and notes on operating the AVENAR panel
8000/2000.
Using the step-by-step directions, you can familiarize yourself with the individual functions:
–
–
Each function is described in detail in an individual chapter.
You will find specific topics in the table of contents. If you are already practiced in the
handling of menus, you can use the overview of all menus in All functions at a glance, page
11 .
2.1
What is new
The AVENAR panel 8000/2000 is the successor panel of the FPA-5000/FPA-1200 modular fire
panel. AVENAR panel 8000/2000 combines a new and powerful panel controller platform with
all the well-known stable safety features.
When operating the AVENAR panel 8000/2000 please note the following important
innovations:
Physical node address (PNA/RSN)
The physical node address of the panel is set in the panel firmware when switching on the
panel for the first time. The physical node address dialog replaces the mechanical rotary
switches.
For details see Initial setup, page 21 .
Power button
The panel must be switched on and off with a power button which is located at the right side
of the panel. Also a reboot of the panel is done via the power button.
For details see Switch on and switch off, page 20 .
Calibration of the touchscreen
The calibration of the touchscreen is started via the boot menu, which can be called up during
the boot process of the panel, for details see Boot menu, page 88 .
Refer to
–
Bosch Sicherheitssysteme GmbH
In overview, page 13 provides an overview of the operating and display elements and the
touch screen.
In Operating principle, page 20 , you will learn how to navigate through the individual
menus and which selection possibilities are available to you.
Boot menu, page 88
User Guide
For your information | en
2020-07 | 3.0 | F.01U.378.877
9