Install The Switch With Shelf Brackets - Cisco Catalyst 9600 Installation Manual
Hide thumbs
Also See for Catalyst 9600:
- Hardware installation manual (110 pages) ,
- Installation note (18 pages) ,
- Manual (13 pages)
Table of Contents
Advertisement
Install the Switch with Shelf Brackets
4. Powering up the chassis and verifying the installation.
Install the Switch with Shelf Brackets
Installing the Shelf Kit L-Brackets
The switch chassis is shipped with two L-brackets installed on the front sides of the chassis. If you are
rack-mounting the switch using the shelf kit, these L-brackets must be removed and replaced with L-brackets
that are part of the shelf kit.
Before you begin
You have ordered and received the shelf kit.
Procedure
Step 1
Remove and discard the L-brackets and the ten mounting screws that the chassis is shipped with. Do not re-use
them during any part of the installation process.
Installing the Switch
8
Installing the Switch
Advertisement
Table of Contents
