Table of Contents
Advertisement
If you assign a value for 3-Core Ratio Limit, do not set the 1-Core Ratio Limit and 2-Core
Ratio Limit to [Auto].
4-Core Ratio Limit
Enter [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 4-core ratio limit that must be higher than or equal to the 5-core
ratio limit.
If you assign a value for 4-Core Ratio Limit, do not set the 1-Core Ratio Limit, 2-Core Ratio
Limit, and 3-Core Ratio Limit to [Auto].
5-Core Ratio Limit
Enter [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 5-core ratio limit that must be higher than or equal to the 6-core
ratio limit.
If you assign a value for 5-Core Ratio Limit, do not set the 1-Core Ratio Limit, 2-Core Ratio
Limit, 3-Core Ratio Limit and 4-Core Ratio Limit to [Auto].
6-Core Ratio Limit
Enter [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 6-core ratio limit that must be lower than or equal to the 5-core
ratio limit.
If you assign a value for 4-Core Ratio Limit, do not set the 1-Core Ratio Limit, 2-Core Ratio
Limit, 3-Core Ratio Limit, 4-Core Ratio Limit, and 5-Core Ratio Limit to [Auto].
BCLK Frequency: DRAM Frequency Ratio
Allows you set the CPU bus speed to DRAM speedratio.
[Auto]
DRAM speed is set to the optimized settings.
[100:133]
The BCLK frequency to DRAM speed ratio is set to 100:133.
[100:100]
The BCLK frequency to DRAM speed ratio is set to 100:100.
3.3.3
DRAM Odd Ratio Mode
This item allows you to enable or disable availability of odd DRAM ratios for improved
granularity.
Configuration options: [Enabled] [Disabled]
3.3.4
DRAM Frequency
This item allows you to set the memory operating frequency. The configurable options vary
with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized
setting.
Configuration options: [Auto] [DDR4-800MHz] - [DDR4-8533MHz]
Chapter 3: BIOS setup
3-5
- Quick Links:
- Cpu Power Enhancement
Hide quick links:
Advertisement
Table of Contents
