Remove The Pvdm4 From The Motherboard Of Cisco 4400 Isrs - Cisco 4000 Series Hardware Installation Manual
Integrated services routers
Hide thumbs
Also See for 4000 Series:
- Upgrade manual (24 pages) ,
- Installation manual (18 pages) ,
- Manual (52 pages)
Table of Contents
Advertisement
Chapter 5
Install and Upgrade Internal Modules and FRUs
Remove the PVDM4 from the Motherboard of Cisco 4400 ISRs
To remove the PVDM4:
Turn off electrical power to the router. Leave the power cable plugged in to channel ESD voltages to
Step 1
ground.
Remove the router cover.
Step 2
Locate the PVDM4 on the motherboard. See
Step 3
Figure 5-27
1
3
Loosen and remove the three screws on the PVDM4.
Step 4
Lift the PVDM4 up from the motherboard.
Step 5
Step 6
Place the PVDM4 in an antistatic bag.
Step 7
Replace the cover.
OL-32185-02
Location of PVDM4 on Cisco 4451-X ISR
1
2
3
4
Screws
Connector
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
Install and Remove PVDM4 on Cisco 4400 or 4300 Series ISRs
Figure
5-27.
2
PVDM4
4
Standoffs
5-35
Hide quick links:
Advertisement
Table of Contents
