Table of Contents
Advertisement
Instrument and control functions
soften the suspension, turn the adjust-
ing ring in direction (b).
2
1
2
3
1
1. Special wrench
4
2. Position indicator
3. Spring preload adjusting ring
Align the appropriate notch in the
5
adjusting ring with the position indi-
cator on the shock absorber.
6
Use the special wrench included in
the owner's tool kit to make the ad-
justment.
7
Spring preload setting:
Minimum (soft):
7 (XP530D-A)
8
Standard:
4 (XP530D-A)
Maximum (hard):
9
1 (XP530D-A)
Rebound damping force
10
To increase the rebound damping force
and thereby harden the rebound damp-
ing, turn the adjusting screw in direction
11
(a). To decrease the rebound damping
force and thereby soften the rebound
12
damping, turn the adjusting screw in di-
rection (b).
13
14
3
(b)
(a)
1. Rebound damping force adjusting screw
Rebound damping setting:
Minimum (soft):
3 (XP530D-A) turns in direction
(b)*
Standard:
1.25 (XP530D-A) turns in direction
(b)*
Maximum (hard):
0 (XP530D-A) turn in direction (b)*
* With the adjusting screw fully turned
in direction (a)
TIP
To obtain a precise adjustment, it is ad-
visable to check the actual total number
of clicks or turns of the damping force
adjusting mechanism. This adjustment
range may not exactly match the spec-
ifications listed due to small differences
in production.
5-27
(b)
(a)
1
Advertisement
Table of Contents
Troubleshooting
