Table of Contents
Advertisement
Zipper teeth
vI8"
7ip
tap
C.
Sew in the zipper.
4.
Attach the presser bar to the right pins
8.
Open the zipper.
1.
Fold back the left seam allowance as
on the zipper foot.
9.
Lower the presser foot and stitch the
shown.
5.
Lower the zipper foot on the right side
rest of the seam.
2.
Turn under the right seam allowance to
at the bottom of the zipper so that the
form a 1/8" fold.
needle pierces the fold and the zipper
3.
Place the zipper teeth next to the 1/8"
tape.
fold and pin in place
6.
Sew through the fold and the zipper
tape to the point where the slider begins.
NOTE:
Be sure the top of the zipper
7.
Lower the needle to hold the fabric and
(the slider) is at the top of the
raise the presser foot.
garment.
41
Advertisement
Table of Contents
