Advertisement
1PH7 AC Main Spindle Motors
1.5 Encoders
1.5
Application
Connection
Technical data
1PH7
1PH7/1-16
Encoders
An incremental encoder is integrated in the non–drive end bearing shield to
sense the speed and rotor position.
Main spindle and C–axis operation
The actual value cable is fed to the drive converter. In order to eliminate noise
being coupled–in, the actual value cables must be routed separately away from
the power cables.
Pre–assembled Siemens cables can be taken from Catalog NC Z/NC60.1.
Technical data and signal characteristics, refer to Chapter 1.2, Encoders (GE).
Siemens AG 2000 All rights reserved
SIMODRIVE Planning Guide Motors (PJM) – 11.00 Edition
09.00
6SN1197–0AA20
Advertisement
