Table of Contents
Advertisement
3-3 Changing the Roll Paper-Width
l Cleaning the roll paper width
The TM-93011 only can accommodate paper widths of 56 mm or 70 mm.
When shipped out of the factory, the printer is set to accommodate the 70 mm
paper width.
Turn off the power and open the roll-paper cover; remove the take-up shaft,
cross-head the roll paper and the paper-edge guides.
Unscrew the outside screw of the roll paper holders at both sides with a
screwdriver, and remove the side roll bracket at both sides by pulling it up and
away from you.
Left-side Roll Bracket
Install one edge of the side roll bracket at both sides into the slot and tighten
down the screw on the other end.
16
Bracket
Advertisement
Table of Contents
