Table of Contents
Advertisement
Verifying the Front Panel LEDs
During the boot process, observe the system LEDs. After the router has booted, the green STAT LED comes
on and stays on.
Verifying the Front Panel LEDs
The front-panel indicator LEDs provide power, activity, and status information useful during bootup. For
more detailed information about the LEDs, see the LED Indicators section.
Verifying the Hardware Configuration
To display and verify the hardware features, enter the following commands:
• show version—Displays the system hardware version, the installed software version, the names and
• show diag slot R0 eeprom —Displays the IDPROM information for the assemblies in the chassis.
Checking Hardware and Software Compatibility
To check the minimum software requirements of Cisco IOS software with the hardware installed on your
router, Cisco maintains the Software Research tool on Cisco.com. The tool provides the minimum Cisco
IOS-XE requirements for individual hardware modules and components.
Note
To access this tool, you must have a Cisco.com login account.
To access the Software Research tool:
1. Go to
2. In the Search by Product tab, type Cisco ASR-920-10SZ-PD Router or Cisco ASR-920-8S4Z-PD .
3. The Cisco Suggested Release(s) are displayed.
Configuring the Router at Startup
This section explains how to create a basic running configuration for your router.
Note
You must acquire the correct network addresses from your system administrator or consult your network plan
to determine the correct addresses before you can complete the router configuration.
Before continuing the configuration process, check the current state of the router by entering the show version
command. This command displays the release of Cisco IOS software that is available on the router.
For information on modifying the configuration after you create it, see the
IOS Master Command List, All Releases guides.
Cisco ASR 920-10SZ-PD and Cisco ASR-920-8S4Z-PD Aggregation Services Router Hardware Installation Guide
62
sources of configuration files, the boot images, and the amount of installed DRAM, NVRAM, and flash
memory.
http://software.cisco.com/selection/research.html
Cisco ASR 920-10SZ-PD and Cisco ASR-920-8S4Z-PD Routers Initial Configuration
Cisco IOS configuration and Cisco
Hide quick links:
Advertisement
Table of Contents
