Page 1
Product Safety Guide ELECTRONIC LABELING SYSTEM PT-P900 Read the whole guide before using your product and keep it for later reference. US ENG...
For more information, and for information about software and using the P-touch Label Printer on a network, see the User’s Guide, which can be found on the Brother Solutions Center. The latest version of your P-touch Label Printer documentation is available from the Brother Solutions Center at support.brother.com.
Page 3
To use the P-touch Label Printer safely If the P-touch Label Printer malfunctions, immediately stop using it, and then contact your Brother dealer. Symbols used in this document The following symbols are used throughout this document: Indicates an imminently hazardous situation which, if the product is handled...
Important safety instructions DANGER Rechargeable Li-ion battery (Optional) Carefully observe the following precautions for the rechargeable Li-ion battery (hereafter referred to as “rechargeable battery”). If these precautions are not followed, overheating, leaking, or cracks in the battery may result in an electrical short, explosion, smoke, fire, electrical shock, injury to yourself or others, or damage to the product or other property.
Page 5
DANGER Rechargeable Li-ion battery (Optional) A liquid (electrolyte) leaking from the P-touch Label Printer or rechargeable battery may indicate that the rechargeable battery is damaged. If the rechargeable battery leaks, immediately stop using the P-touch Label Printer, unplug the AC adapter, and isolate the P-touch Label Printer by placing it in a bag.
Page 6
DO NOT try to disassemble or alter the P-touch Label Printer, otherwise a fire, electrical shock, or damage may occur. For servicing, adjustments or repairs, contact your Brother dealer. (The warranty does not cover repairs for damage resulting from disassembly or alterations performed by the user.)
Page 7
Label Printer. Failure to do so may result in an injury to yourself or others, or damage to the P-touch Label Printer or other property. Brother does not assume any responsibility for any accident or damage resulting from not using the specified AC adapter, power cord and USB cable.
40% and 60% are recommended). To maintain the efficiency and life of the rechargeable battery, charge it at least every six months. If you notice anything unusual about the rechargeable battery the first time it is used, for example overheating or rust, STOP using the battery. Contact Brother customer service.
Page 9
Depending on the environmental conditions and the applied settings, some characters or symbols may be difficult to read. Use Brother TZe tapes, FLe labels, HGe tapes and HSe tubes with the P-touch Label Printer. DO NOT pull or apply pressure to the tape in the cassette to avoid damaging the P-touch Label Printer.
Page 10
The printed label may differ from the image that appears on the LCD (Optional:TDU). Note that Brother Industries, Ltd. does not assume responsibility for any damage or injury arising from the failure to follow the precautions listed in this guide. ...
Compilation and Publication Notice Under the supervision of Brother Industries, Ltd., this guide has been compiled and published covering the latest product’s descriptions and specifications. The contents of this guide and the specifications of this product are subject to change without notice.
Bridgewater, NJ 08807-0911 USA TEL : (908) 704-1700 declares, that the products Product Name: Brother P-touch Label Printer Model Number: PT-P900 comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 13
The enclosed interface cable should be used in order to ensure compliance with the limits for a Class B digital device. Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user’s authority to operate the equipment.
Page 14
Rechargeable Li-ion Battery Specifications (Optional) Charging time: Approximately 3 hours when charged using an AC adapter (AD9100ESA). Nominal Voltage: DC 14.4 V Nominal Capacity: 1800 mAh Rechargeable Li-ion Battery Surrounding Temperature Range Charge 104F (40C) Standard discharge current 0.9 A 140F (60C) Maximum discharge current 5.0 A 104F (40C)
Page 15
D00L0M001 Printed in China Impreso en China...