Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for DeWalt XR FLEXVOLT DCB500-QS
Summary of Contents for DeWalt XR FLEXVOLT DCB500-QS
- Page 1 DCB500 Final print size: A6 (105mmx148mm)
- Page 2 English (original instructions) Copyright D WALT...
- Page 3 Fig. A Fig. B...
- Page 4 Fig. C Fig. D...
-
Page 5: Technical Data
English CORDED POWER SUPPLY DCB500 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data DCB500-QS DCB500-GB DCB500-LX DCB500-XE Power source Type Max. - Page 6 English Safety Rules for the Corded Power Supply DANGER: High voltage present inside the unit. Do not probe with conductive objects. Danger of electric shock or electrocution. DANGER: If the corded power supply case is cracked or damaged, do not plug into AC outlet or insert into tool.
-
Page 7: Electrical Safety
English • Do not operate the corded power supply with damaged cord or plug. In case of damaged power supply cord, the supply cord must be replaced immediately by the manufacturer, its service agent or similar qualified person to prevent any hazard. Keep cord away from heat, oil, sharp edges or moving parts. -
Page 8: Using An Extension Cable
English Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A. Using an Extension Cable An extension cord should not be used unless absolutely necessary. Use an approved extension cable suitable for the power input of your charger (see Technical Data). The minimum conductor size is 1.5 mm ;... -
Page 9: Intended Use
English Intended Use This corded power supply is designed for professional use in D WALT 2x 54V FLEXVOLT™ tools. DO nOT use or store under wet conditions or in the presence of flammable liquids or gases. DO nOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool. -
Page 10: Maintenance
English WARNING: To minimize the risk of eye injury, always wear ANSI Z87.1 approved eye protection and respiratory protection when performing this. NOTICE: The corded power supply is for AC power sources only when used with a tool. Use with DC power sources could result in damage to the tool. To install the corded power supply into your tool •... -
Page 11: Optional Accessories
English Cleaning Cleaning the D WALT Corded Power Supply WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the corded power supply. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the corded power supply;... - Page 12 Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com en Luxemburg 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT Tel: 70 20 15 10 www.dewalt.dk...