Related Manuals for LG AB-BL200X
Summary of Contents for LG AB-BL200X
- Page 1 Owner's Manual e-MultiBoard Mounting Bracket & Stand Please read the safety information carefully before using the product. AB-BL200X AD-BX200X AB-BP200X AD-BL200H AD-BP200H P/NO : MFL63640508(1203-REV02)
- Page 2 Bracket AB-BL200X, AB-BP200X E-MultiBoard Mounting Bracket – Landscape E-MultiBoard Mounting Bracket – Portrait AB-BL200X AB-BP200X Accessories Owner's 4 Guide Spacer Screws 2 Bracket Screws 2 Nuts Wrench 4 Guide Spacers Manual (M8 x 32 mm) (M8 x 100 mm) e-MultiVision Stand...
-
Page 3: Safety Precautions
Safety Precautions - If you are a professional installer, please read this manual carefully before installing the product. - After installing the product according to the manual, ensure that the user also reads the manual carefully. After reading the manual, please keep it handy for future reference. Warning The product should be installed where its weight can be The product should be installed by a qualified professional... - Page 4 Transportation method for panel protection When moving or lifting the monitor, read the following to prevent the monitor from being When transporting the monitor, do not expose scratched or damaged and for safe transportation the monitor to jolts or excessive vibration. regardless of its type and size.
-
Page 5: Storage Method For Panel Protection
Storage method for panel protection <Correct method> Panel Cushion If the product needs to be When laying down the prod- set upright, hold both sides uct, lay a cushion on a flat of the product, and tilt back- floor, and put the product on ward carefully for the panel it with the panel of the prod- not to touch the floor. -
Page 6: Before Installation
LG Electronics is not liable for problems that occur due to the installation of the product on a slanted wall or on the ceiling. * Check the accessories provided with the product before installing. LG Electronics is not liable for any damage to or loss of the accessories after the package has been opened. - Page 7 Attaching the Bottom Stand Frame and Vertical Stand Frame Fix two bolts in the holes visible from the bottom as illustrated with the arrows. Insert a nut and then fix a M8 x 15 mm bolt. Stand Frame Vertical Stand Frame Bottom Insert one nut on each side Then insert one bolt (M8 x 15) 2 Bolts (M8 x 100 mm)
- Page 8 Attaching the Vertical Stand Frame and Horizontal Stand Frame Place the horizontal stand frame on top of the angle guide of the vertical stand frame, insert a nut on each side, then fasten with two M8 x 15 mm bolts as illustrated with the arrow. Then insert one bolt (M8 x 15) on each side.
- Page 9 Attaching the Horizontal or Vertical Bracket to the Stand Place the horizontal or vertical bracket on the stand. 2 Screws (M8X100mm) CAUTION Check the direction of the arrows shown in the figure above to avoid placing the bracket upside down.
- Page 10 Verifying Where the Brackets Are Fixed Refer to the following illustration to fix the brackets according to the type. E-MultiBoard Wall Bracket-Landscape E-MultiBoard Wall Bracket-Portrait AB-BL200X AB-BP200X Please refer to page 7. The bracket may be distorted depending on the flatness of the wall.
-
Page 11: How To Mount
How to mount Attaching the Guide Spacers If the screws are not fully tightened when you fix the guide spacers, check the length of the screws and refer to the technical service manual. 4 Guide Spacer Fixing Screws Guide Spacer (M8 x 32 mm) <How to Fix Guide Spacers>... -
Page 12: Cable Connection
How to Attach the Product and Bracket - Two or more people are needed to install the product. Place the product assembled with the guide spacers on the bracket wall, as illustrated with the arrow. → Make sure that the product is securely mounted to the bracket. Cable Connection - It is recommended to arrange cables running through the bracket before installing the set. - Page 13 Set arrangement 1. Mount set 2, then align it horizontally using the horizontal alignment screws. 2. Fix the right and left sides securely using the right/left fixing screws <Horizontal Alignment Screw> Loosen the screw to lower the set. (Loosen the right and left screws gently in turn.) <Right/Left Fixing Screw>...
- Page 14 3. When mounting set 3, push bracket 3 to the right end to ensure there is enough space for set 2. 4. Adjust the height using the horizontal alignment screws so that set 3 and set 2 are at the same height. 5.
- Page 15 7. Arrange the sets in a perfectly straight line using fixers so that sets do not stick out at the front or back. (It is not necessary to use all the fixers.) <REAR> rly, Screw (M4 x 10 mm) When you fix the screws, make sure that no set sticks out at the front or back. 8.
-
Page 16: Product Specifications
Product Specifications 302.4 302.4 661.2 661.2 1325.5 1325.5 1322.4 1322.4 222.4 222.4 82.7 82.7 302.4 372.8 222.4 745.7 1325.5 1325.5 82.7 135.6 135.6 Landscape 135.6... - Page 17 302.4 302.4 372.8 372.8 222.4 222.4 745.7 745.7 82.7 82.7 1325.5 135.6 Landscape 135.6 135.6 Portrait AD-BX200X AD-BL200H AD-BP200H Model Name AB-BL200X AB-BP200X Width (mm) 1426 1110 1900 1540 Height (mm) Depth (mm) Weight (kg) 16.5 17.3...
- Page 18 The model name and serial number are located on the back and side of the product. Please make a note of these below. Model Name Serial Number...