Table of Contents
Advertisement
Installation
Installation
1.
Select a good location.
Place your fridge-freezer where it is easy to use.
2.
Avoid placing the unit near heat sources, direct
sunlight or moisture.
3.
To ensure proper air circulation around the
fridge-freezer, please maintain sufficient space
on both the sides as well as top and maintain at
least 2 inches (5 cm) from the rear wall.
4.
To avoid vibration, the unit must be leveled.
If required, adjust the leveling screws to
compensate for the uneven floor.
The front should be slightly higher than the rear
to aid in door closing.
Leveling screws can be turned easily by tipping
the cabinet slightly.
Turn the leveling screws counterclockwise (
to raise the unit, clockwise (
5.
Clean your fridge-freezer thoroughly and wipe
off all dust accumulated during shipping.
6.
Install accessories such as ice cube box, etc., in
their proper places. They are packed together to
prevent possible damage during shipment.
7.
Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances
on the same outlet.
Appliance usage range
This appliance is intended to be used in household
and similar applications such as:
· staff kitchen areas in shops, offices and other
working environments;
· farm houses and by clients in hotels, motels and
other residential type environments;
· bed and breakfast type environments;
· catering and similar non-retail applications
Starting
When your fridge-freezer is installed, allow it 2-3
hours to stabilize at normal operating temperature
prior to filling it with fresh or frozen foods.
If power plug is disconnected, allow 5 minutes
delay before restarting.
)
Your fridge-freezer is now ready for use.
) to lower it.
Note
Do not move refrigerator while the refrigerator
is operating.
Compressor may occur a temporary rattling noise.
(This is normal and will not impact on the
performance or the life of the compressor.
The rattling will stop after the refrigerator
comes to a rest.)
Advertisement
Table of Contents
