hit counter script
Toro Groundsmaster 5900 Software Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lawn Mower
  5. Groundsmaster 5900
  6. Software manual
Toro Groundsmaster 5900 Software Manual

Toro Groundsmaster 5900 Software Manual

Hide thumbs Also See for Groundsmaster 5900:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual
Groundsmaster
Model No. 31698-Serial No. 400000000 and Up
Model No. 31699-Serial No. 400000000 and Up
Read this information carefully to learn how to operate the InfoCenter control on your product. You are
responsible for operating the product properly and safely.
You may contact Toro directly at www.Toro.com for product safety and operation training materials, accessory
information, help finding a dealer, or to register your product.

Introduction

The Software Guide for the Groundsmaster
5910 rotary mower provides information for using the
system information and control the system functions.
Contents
Introduction ............................................................... 1
Product Overview ..................................................... 1
Controls ............................................................. 1
Operation .................................................................. 2
InfoCenter Control .............................................. 2
Accessing the Protected Menus.......................... 5
Changing the InfoCenter PIN.............................. 7
Brightness/Contrast ........................................ 9
Setting the Cruise-Control Speed ....................... 9
InfoCenter Advisories ....................................... 10
© 2017-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
5900 or 5910 Rotary Mower

Product Overview

®
5900 or

Controls

InfoCenter Startup Screen
When you start the machine, the startup screen
appears, displaying the corresponding icons that apply
(i.e., the parking brake is applied, the PTO is in the O
position, and the cruise control is in the O
Note:
screen is meant to show all the potential icons that
could appear on the screen while operating.
Refer to the following graphic for all of the icon
meanings
Register at www.Toro.com.
Form No. 3412-757 Rev B
The following figure is an example screen; this
(Figure
1).
Original Instructions (EN)
All Rights Reserved *3412-757* B
Printed in the USA
Software Guide
N
position).
N

Advertisement

Table of Contents
loading

Related Manuals for Toro Groundsmaster 5900

Summary of Contents for Toro Groundsmaster 5900

  • Page 1: Table Of Contents

    Read this information carefully to learn how to operate the InfoCenter control on your product. You are responsible for operating the product properly and safely. You may contact Toro directly at www.Toro.com for product safety and operation training materials, accessory information, help finding a dealer, or to register your product.

  • Page 2: Operation

    11.3 G033320 g033320 Figure 1 1. PTO indicator 6. Engine speed 2. Glow-plug indicator 7. Cruise-control-set indicator 3. Parking-brake indicator 8. Engine-hours indicator 4. Diesel-particulate filter 9. H/L (High/Low) (DPF) maintenance transmission-range indicator indicator G033145 5. Fan-reverse indicator g033145 Figure 2 6.
  • Page 3 Note: In the following example, the hydraulic-fluid-cooling fans are running at 25% speed in the forward direction. • Engine-coolant-temperature and fan indicator—top, left screen (Figure Note: In example Figure 5, the engine-coolant fans are running at 50% speed in the reverse direction.
  • Page 4 If the diesel-particulate-filter (DPF) maintenance and the status of the cooling fan (Figure indicator (Figure 1) appears on the screen, immediately contact your Toro distributor for service. Battery Voltage Fuel-Level Indicator This display shows both the 12 V and 24 V battery voltage (Figure...

  • Page 5: Accessing The Protected Menus

    0000 or 1234. on the InfoCenter, then the alarm should stop. If you changed the PIN code and forgot the • Regeneration requested by the engine code, contact your Authorized Toro Distributor for • assistance. Any engine fault •...
  • Page 6 g214883 g214879 Figure 8 If the menus are protected, the E NTER screen displays. 3. Press buttons 1 through 4 to enter your PIN code (Figure g214882 Figure 10 Enter Pin: 1200 Note: When you shutoff the engine and then 1000 move the ignition switch to the R position, PIN...

  • Page 7: Changing The Infocenter Pin

    Changing the InfoCenter 1. From the startup screen, press and hold button 5 until the Main Menu appears (Figure 11). G033169 g033169 Figure 13 5. Press button 2 until you reach PIN Change on the PIN Settings screen and press button 4 to select PIN Change (Figure 14).
  • Page 8 G033174 G033172 g033174 g033172 Figure 17 Figure 15 1. Digit 1 4. Digit 4 1. Digit 1 4. Digit 4 2. Digit 2 5. Enter PIN 2. Digit 2 5. Enter PIN 3. Digit 3 3. Digit 3 7. Enter your new PIN using buttons 1 to 4 and press button 5 when you complete your new (Figure 16).

  • Page 9: Changing The Infocenter Display Brightness/Contrast

    Changing the InfoCenter Display Brightness/Contrast 1. From the startup screen, press button 5 to access the brightness/contrast pop-up-menu (Figure 18). G033179 g033179 Figure 19 1. Cruise-control selection 4. From the Cruise Control screen, press button 1 to decrease the cruise control speed or button 2 G033178 to increase the cruise control speed (Figure...

  • Page 10: Infocenter Advisories

    InfoCenter Advisories Operator advisories automatically display on the InfoCenter screen when a machine function requires additional action. For example, if you attempt to start the engine while pressing the traction pedal, an advisory displays, indicating that the traction pedal must be in the N position.
  • Page 11 PTO Denied Hydraulic fluid too cold To engage PTO, let hydraulic fluid warm up Cruise Control Denied Too slow to capture cruise Increase ground speed control Deck Lower Denied To lower deck, return traction Can’t lower in transport pedal to N EUTRAL Deck Lower Denied Out of seat...
  • Page 12 Engine Advisory 1210 Engine derate due to high Let engine cool temperature Engine Advisory 1211 Engine speed restricted: Hydraulic fluid is less than 4°C hydraulic fluid too cold (40°F), so derate the engine speed to 1,650 rpm Fuel Level 1302 Fuel level is low Add fuel TP Not Calibrated...
  • Page 13 Deck Raise Denied 1605 Service required Contract your Toro distributor Deck Raise Denied 1606 All decks not raising together Increase the engine speed to 2,000 rpm, and the decks will raise one at a time when all 3 switches are held down...
  • Page 14 Notes:...
  • Page 15 Notes:...

This manual is also suitable for:

Groundsmaster 5910

Table of Contents