LIGHTING SYSTEM
I
ELEC
I
53
I
TROUBLESHOOTING
NOTE:
_
Before this troubleshooting, remove the side covers and seat.
I
HEADLIGHT DOES NOT COME ON.
CONTINUITY DOES NOT
EXIST ON ONE CIRCUIT
1. Headlight bulb conduct check:
- Remove the headlight bulb
CD.
Refer to
IICHAPTER 3. HEADLIGHT BULB
REPLACEMENT" section.
-Connect the Pocket Tester (YU-03112) to
the bulb terminals as shown, and check • • •
~
the bulb for continuity.
Bulb is faulty.
Replace it.
Bulb socket is faulty.
Replace it.
CONTINUITY EXISTS ON
BOTH CIRCUIT
2. Headlight bulb socket conduct check:
-Install the bulb to the headlight socket.
CONTINUITY DOES NOT
-Connect the Pocket Tester (YU-03112) to
EXIST ON ONE CIRCUIT
the headlight leads (Black
CD,
Yellow
~
and Green
@),
and check it for con- • • •
~
tinuity.
CONTINUITY EXISTS ON
BOTH CIRCUIT
FAULTY
3. Fuse inspection:
Check the fuse condition. Refer to "CHAP- • • •
~
TER 3. FUSE INSPECTION" section.
OK
*
13
Fuse is faulty.
Replace it.