Fork Seal Driver:
PIN YM-1368
Adapter:
PIN YM-33963
342-016
____________ F_R_O_~_ro_R_K_lcHA~~1
7. Install:
- Dust seal
CD
Press the dust seal into inner tube with Fork
Seal Driver
@
and Adapter
@.
NOTE:
_
Before installing the dust seal, apply the lithium
soap base grease onto the dust seal lip.
8. Fill:
-Fork Oil
Fork Oil Capacity:
238 cm
3
(8.38 Imp oz, 8.05 US
oz)
Recommended Oil:
Yamaha Fork Oil 10WT or
equivalent
NOTE:
_
After supplying the fork oil, pump the front fork
up and down to distribute the oil.
(o~
9. Measure:
-Oil level
®
Out of specification--+Add or reduce oil.
®
"
Oil Level:
135
mm
(5.32
in)
From the top of the inner fork
tube fully compressed without
spring.
NOTE:
- - - -
Place the front fork on upright position.
10. Install:
-Cap bolt
NOTE:
_
Temporary tighten the cap bolt at this point.
6-17