Page 1 Operating Instructions Digital Camera DC-S1H DVQP2024ZA F0919AJ0...
Page 2 Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read this document carefully and keep it handy for future reference. Please note that the actual controls and components, menu items, etc. of your Digital Camera may look somewhat different from those shown in the illustrations in this document.
Page 3: About Operating Instructions
About Operating Instructions Symbols Used in This Document Symbols for recording modes, pictures, and videos that can be used In this document, symbols are placed at the start of functional explanations (recording modes, pictures, and videos) showing conditions in which these functions can be used.
Page 4 About Operating Instructions Notification classification symbols In this document, notifications are classified and described using the following symbols: To confirm prior to using the function Hints for better use of the camera and tips for recording Notifications and supplementary items regarding specifications Related information and page number This document provides an explanation with the assumption that menu settings are in the default settings.
Page 5: Chapters
Chapters 1. Introduction 2. Getting Started 3. Basic Operations 4. Image Recording 5. Focus/Zoom 6. Drive/Shutter/Image Stabiliser 7. Metering/Exposure/ISO Sensitivity 8. White Balance/Image Quality 9. Flash 10. Recording Videos 11. Special Video Recording 12. Connections with External Devices (Video) 13. Playing Back and Editing of Images 14.
Page 6: Table Of Contents
Contents About Operating Instructions ............3 Chapters ..................5 Contents by Function..............15 1. Introduction Before Use.................19 Standard Accessories..............22 Lenses That Can Be Used............23 Memory Cards That Can Be Used..........25 Names of Parts ................28 Camera....................28 Viewfinder/Monitor Displays .............. 32 Status LCD Display ................33 2.
Page 7 Contents 3. Basic Operations Basic Recording Operations............59 How to Hold the Camera..............59 Taking Pictures ..................61 Recording Videos................62 Selecting the Recording Mode ............63 Camera Setting Operations ............64 Display Settings................. 68 Setting the Viewfinder ................68 Switching Between the Monitor and Viewfinder .........69 Switching the Display Information ............70 Turning On the Status LCD Backlight ..........72 Quick Menu ................
Page 8 Contents 5. Focus/Zoom Selecting the Focus Mode ............96 Using AF ..................97 [AF Custom Setting(Photo)] ............101 Selecting the AF Mode ............103 [Face/Eye/Body/Animal Detect.]............. 105 [Tracking]..................108 [225-Area]..................110 [Zone (Vert./ Horz.)]/ [Zone (Square)]/ [Zone (Oval)]...... 111 [1-Area+]/ [1-Area]................113 [Pinpoint] ..................114 [Custom1] to [Custom3]..............
Page 9 Contents Selecting the Focus Point for the Picture to Save......169 Focus Stacking ................171 [Silent Mode]................174 [Shutter Type] ................175 Image Stabiliser............... 177 Image Stabiliser Settings ..............179 7. Metering/Exposure/ISO Sensitivity [Metering Mode]............... 185 Programme AE Mode .............. 186 Aperture-Priority AE Mode............188 Shutter-Priority AE Mode............
Page 10 Contents 9. Flash Using an External Flash (Optional)..........228 Removing the Hot Shoe Cover............228 Setting Flash................231 [Flash Mode]..................231 [Red-Eye Removal] ................. 233 [Firing Mode]/[Manual Flash Adjust.] ..........234 [Flash Adjust.].................. 235 [Flash Synchro] ................236 [Auto Exposure Comp.] ..............237 Recording Using a Wireless Flash...........238 10.
Page 11 Contents [Master Pedestal Level] ..............279 Recording While Controlling Overexposure (Knee) ......280 [ISO Sensitivity (video)]..............282 Audio Settings ................. 283 [Sound Rec Level Disp.] ..............283 [Mute Sound Input]................283 [Sound Rec Gain Level] ..............284 [Sound Rec Level Adj.] ..............284 [Sound Rec Level Limiter] ..............285 [Wind Noise Canceller] ..............285 Main Assist Functions..............
Page 12 Contents 12. Connections with External Devices (Video) HDMI Devices (HDMI Output) ..........329 Attaching the Cable Holder ............. 330 Images Output via HDMI ..............333 HDMI Output Image Quality (Resolution/Frame Rate) ....335 Settings for Down-Converting............335 HDMI Output Settings..............338 Outputting the Camera Information Display via HDMI..... 338 Outputting Control Information to an External Recorder ....
Page 13 Contents 14. Camera Customisation Fn Buttons ................367 [Dial Operation Switch] ............376 Quick Menu Customisation............378 Custom Mode ................383 My Menu.................. 387 [Save/Restore Camera Setting]..........389 15. Menu Guide List of Menu ................391 [Photo] Menu ................396 [Video] Menu ................
Page 14 Contents 17. Connecting to Other Devices Viewing on a TV...............524 Importing Images to a PC ............527 Copying Images to a PC ..............527 Installing Software ................529 Storing on a Recorder..............532 Tethered Recording ..............533 Installing Software ................533 Operating the Camera from a PC............ 534 Printing..................535 18.
Page 15: Contents By Function
Contents by Function Power Source Viewfinder Charging Dioptre adjustment Charging error Display magnification Eye sensor Battery indication [Eye Sensor AF] Power supply Display [Battery Information] Power save function Recording screen Number of pictures that can Playback screen be taken, available recording Viewfinder time Status LCD...
Page 16 Contents by Function AF/AE Lock [Long Exposure NR] Touch AF [i.Dynamic Range] [Vignetting Comp.] [Touch Pad AF] [Diffraction Compensation] [AF Assist Light] Taking Pictures [MF Guide] Recording mode [MF Assist] Quick menu [Focus Peaking] Zoom [Ex. Tele Conv.] Image Stabiliser Bracket recording [Image Stabilizer] Bulb recording...
Page 17 Contents by Function Video Recording Exposure (Video) Video recording Exposure settings [System Frequency] [Image Area of Video] [Dual Native ISO Setting] Creative Video mode Luminance level [Variable Frame Rate] [Master Pedestal Level] High frame rate video Knee [Focus Transition] Gain [Live Cropping] Audio Log recording (V-Log)
Page 18 Contents by Function Editing of Images Wi-Fi/Bluetooth [RAW Processing] Bluetooth connection [Protect] [Wi-Fi connection] [Rating] [Wi-Fi Setup] [Resize] Smartphone app “LUMIX [Rotate] Sync” [Video Divide] [Remote shooting] [Copy] Location information Sending images Customisation ([Smartphone]) [Custom] menu Sending images ([PC]) Function button Sending images ([Printer]) Custom recording mode Sending images ([Web...
Page 19: Introduction
– Touch operations may be incorrectly recognised. When using in low temperatures (s10 oC to 0 oC (14 oF to 32 oF)) – Before use, attach a Panasonic lens with a minimum recommended operating temperature of j10 oC (14 oF).
Page 20 1. Introduction Do not place a hand inside the camera mount. This may cause a failure or damage because the sensor is a precision device. If you shake the camera while turning the camera off, a sensor may operate or a rattling sound may be heard.
Page 21 1. Introduction Be Sure to Perform Trial Recording in Advance Perform trial recording in advance of an important event (wedding, etc.) to check that recording can be performed normally. No Compensation Regarding Recording Please note that compensation cannot be provided in the event that recording could not be performed due to a problem with the camera or a card.
Page 22: Standard Accessories
1. Introduction Standard Accessories Check that all the accessories are supplied before using the camera. The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to “Operating Instructions <Basic>” (supplied). Digital camera body is referred to as camera in this document.
Page 23: Lenses That Can Be Used
1. Introduction Lenses That Can Be Used The lens mount of this camera is compliant with the L-Mount standard of Leica Camera AG. It can be used with 35 mm full-frame compatible interchangeable lenses and APS-C size interchangeable lenses of this standard.
Page 24 [Filter Settings] [Aspect Ratio] [High Resolution Mode] [Picture Size] [HLG Photo] [Ex. Tele Conv.] [Rec Quality] [6K/4K PHOTO] [Image Area of Video] [Post-Focus] [Multiple Exposure] [Shutter Type] Refer to catalogues/websites for most current information regarding supported lenses. https://panasonic.jp/support/global/cs/dsc/ (English only)
Page 25: Memory Cards That Can Be Used
Video Speed Class 90 of the UHS- standard. SDXC memory card Operation with the Panasonic cards on the left has (48 GB to 128 GB) been verified. For the latest information, check the following support site: https://panasonic.jp/support/global/cs/dsc/...
Page 26 1. Introduction Cards That Can Be Used Stably with This Camera When using the following functions, use cards that have the correct SD Speed Class, UHS Speed Class, and Video Speed Class. Speed classes are standards to guarantee the minimum speed necessary for continuous writing.
Page 27 1. Introduction You can prevent the writing and deleting of data by setting the write-protect switch A on the card to “LOCK”. The data stored on a card may be damaged due to electromagnetic waves, static electricity or a failure of the camera or card.
Page 28: Names Of Parts
1. Introduction Names of Parts Camera Stereo microphone (l 284) Camera on/off switch (l 56)/ Do not block the microphone ] (Status LCD backlight) with a finger. Audio will be (l 72, 447) difficult to record. Shutter button (l 61) ] (Recording distance [WB] (White balance) button reference mark) (l 126)
Page 29 1. Introduction Dioptre adjustment dial (l 68) [Q] (Quick menu) button (l 73) Operation lock lever (l 67) Cursor buttons (l 65)/ Fn buttons (l 367) [(] (Playback) button (l 347) 3: Fn13, 1: Fn14, 4: Fn15, Monitor 32, 542)/ 2: Fn16 Touch screen (l 66) Control dial (l 65)
Page 30 If you attempt to attach a tripod When using an AC adaptor, with a screw length of 5.5 mm ensure that the Panasonic DC (0.22 inch) or more, you may not Coupler (DMW-DCC16: be able to securely fix it in place optional) and AC Adaptor or it may damage the camera.
Page 31 1. Introduction 16 17 1 21 Shoulder strap eyelet (l 34) [MIC] socket (l 340) Self-timer light (l 158)/ Headphone socket (l 345) AF assist light (l 401) Excessive sound pressure from Fn button (Fn1) (l 367) earphones and headphones can Grip cause hearing loss.
Page 32: Viewfinder/Monitor Displays
1. Introduction Viewfinder/Monitor Displays At the time of purchase, the viewfinder/monitor displays the following icons. For information about the icons other than those described here, refer to page 542. Viewfinder Monitor FINE FINE ± 9 1011 12 14 15 16 17 Photo Style (l 210) Metering mode (l 185) Level gauge (l 438)
Page 33: Status Lcd Display
1. Introduction Status LCD Display The following recording settings are displayed when recording pictures. Refer to page for information on the [ ] mode (Creative Video mode) display. WB BKT Recording mode (l 63) HLG photo (l 226) Picture quality (l 90)/ Metering mode (l 185) Picture size (l 88) Shutter speed (l 61)
Page 34: Getting Started
Getting Started Attaching a Shoulder Strap Attach a shoulder strap to the camera with the following procedure to prevent it from dropping. Pass the shoulder strap through the shoulder strap  eyelet A.  Pass the end of the shoulder ...
Page 35 2. Getting Started Use the shoulder strap around your shoulder. – Do not wrap the strap around your neck. It may result in injury or accident. Do not leave the shoulder strap where an infant can reach it. – It may result in an accident by mistakenly wrapping around the neck.
Page 36: Charging The Battery
2. Getting Started Charging the Battery You can charge the battery either using the supplied charger, or in the camera body. You can also charge by connecting to a USB PD (USB Power Delivery) compatible device using the supplied USB connection cable (C–C). Furthermore, you can turn the camera on while it is charging and record.
Page 37 2. Getting Started Connect the charger and the AC adaptor with the USB connection cable (C–C). Hold the plugs and insert them straight in or pull them straight out. (Inserting these at an angle may cause deformation or malfunction) Connect the AC mains lead to ...
Page 38 2. Getting Started [CHARGE] Light Indications Charging 0% to 49% 50% to 79% 80% to 99% 100% status [CHARGE] light A Blinking B On C Off After charging, disconnect the power source connection and remove the battery. If the [50%] light is blinking quickly, then charging is not occurring. –...
Page 39: Battery Insertion
2. Getting Started Battery Insertion Always use genuine Panasonic batteries (DMW-BLJ31). If you use other batteries, we cannot guarantee the quality of this product. Set the camera on/off switch to [OFF]. Open the battery door. ≥Move the battery door release lever to the [OPEN] position.
Page 40 2. Getting Started Removing the Battery Set the camera on/off switch to [OFF]. Open the battery door. Check that the card access light A is turned off and then open the battery door. Push the lever B in the direction of the ...
Page 41: Inserting A Battery Into The Camera For Charging
2. Getting Started Inserting a Battery into the Camera for Charging Charging time Approx. 140 min Using the camera body and the supplied AC adaptor. The camera is turned off. The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used.
Page 42 2. Getting Started Connect the AC mains lead to  the AC adaptor and then insert into the electrical outlet.  ≥[CHARGE] is displayed on the status LCD and charging starts. [FULL] is displayed when charging is complete. You can also charge the battery by connecting a USB device (PC, etc.) and the camera with the USB connection cable (C–C or A–C).
Page 43: Using The Camera While Supplying It With Power (Supplying Power/Charging)
2. Getting Started Using the Camera While Supplying It with Power (Supplying Power/Charging) When charging with both the camera body and the supplied AC adaptor (l 41), you can charge while the camera is being supplied with power by turning the camera on. You can record while charging. This is also possible by connecting devices that support USB PD (USB Power Delivery) to the camera.
Page 44: Notifications Regarding Charging/Power Supply
2. Getting Started Notifications Regarding Charging/Power Supply Power Indications Indication on status LCD A USB connection cable supplying power B Power source  C The battery level of the battery in the  camera D The battery level of the battery in the ...
Page 45 To ensure that safe products are used, we recommend that a genuine Panasonic battery pack is used. Do not leave any metal items (such as clips) near the contact areas of the power plug.
Page 46: [Power Save Mode]
2. Getting Started [Power Save Mode] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time. Reduces battery consumption. Select [Power Save Mode] [Sleep Mode] Sets the amount of time until the camera is put to sleep.
Page 47 2. Getting Started [Power Save Mode] is not available in the following cases: – While connected to a PC or printer – During video recording/video playback – When recording with [6K/4K Pre-Burst] – During a [Time Lapse Shot] – When recording with [Stop Motion Animation] (when [Auto Shooting] is set) –...
Page 48: Inserting Cards (Optional)
2. Getting Started Inserting Cards (Optional) This camera supports the double card slot function. When two cards are used, relay recording, backup recording, and allocation recording are available. For information about the cards that can be used, refer to page 25. Open the card door.
Page 49 2. Getting Started You can set the way to record to card slots 1 and 2: [Double Card Slot Function] (l 92) Card Access Indications The card access light turns on while the card is being accessed. Removing a Card Open the card door.
Page 50: Formatting Cards (Initialisation)
2. Getting Started Formatting Cards (Initialisation) Format the cards with the camera before use in order to ensure optimal card performance. When a card is formatted, all of the data stored in the card is erased and cannot be restored. Save a backup of necessary data before formatting the card.
Page 51: Attaching A Lens
2. Getting Started Attaching a Lens You can attach the Leica Camera AG L-Mount standard lens to this camera. For information about the lens that can be used, refer to page 24. Change the lens in a location where there is not a lot of dirt and dust. If dirt or dust gets on the lens, refer to page 571.
Page 52 2. Getting Started Align the lens fitting marks B on the lens and camera and then rotate the lens in the direction of the arrow. ≥Attach the lens by rotating it until it clicks. When you have attached a lens that does not have a communication function with this camera, after turning on the camera, a message asking for confirmation of the lens information is displayed.
Page 53 2. Getting Started Removing a Lens Set the camera on/off switch to [OFF]. While pressing the lens release button A, rotate the lens in the direction of the arrow until it stops and then remove it. After removing the lens, be sure to attach the body cap and the lens rear cap.
Page 54: Adjusting The Monitor Direction And Angle
2. Getting Started Adjusting the Monitor Direction and Angle The monitor on this camera has angling and tilting that you can adjust in combinations to freely change the orientation and angle. At the time of purchase, the monitor is stowed in the camera body. Turn the monitor surface out before use.
Page 55 2. Getting Started Tilt While sliding the monitor lock lever in the direction of the arrow, push the monitor up. The monitor of this camera can be tilted in two stages.  The monitor can still be opened when tilted to 30°...
Page 56: Setting The Clock (When Turning On For The First Time)
2. Getting Started Setting the Clock (When Turning On for the First Time) When you turn the camera on for the first time, a screen to set the time zone and clock appears. Be sure to set these settings before use to ensure images are recorded with the correct date and time information.
Page 57 2. Getting Started When [Please set the clock] appears, press Set the clock. 21: Select an item (year, month, day, hour, minute, or second). 34: Select a value. To set the display order B and time display format C ≥Press 21 to select the time zone [Style] and then press the screen for setting the display order and time display format...
Page 58 2. Getting Started If the camera is used without setting the clock, it will be set to 0:00:00, 1st January 2019. Clock settings are maintained for approx. 3 months using the built-in clock battery even without the battery. (Leave the fully-charged battery in the camera for approx. 24 hours to charge the built-in battery.) [Time Zone] and [Clock Set] can be changed from the menu: –...
Page 59: Basic Operations
Basic Operations Basic Recording Operations How to Hold the Camera To minimise camera shake, hold the camera so that it will not move during recording. Hold the camera with both hands, keep your arms still at your side, and stand with your feet shoulder width apart. Hold the camera firmly by wrapping your right hand around the camera ≥...
Page 60 3. Basic Operations Vertical Orientation Detection Function This function detects when pictures were recorded with the camera held vertically orientated. With the default settings, pictures are automatically played back vertically oriented. If you set [Rotate Disp.] to [OFF], pictures will be played back without being rotated.
Page 61: Taking Pictures
3. Basic Operations Taking Pictures Adjust the focus. ≥Press the shutter button halfway (press it gently). ≥The aperture value A and shutter speed B are displayed. (When the correct exposure cannot be obtained, the indications blink in red.) ≥Once the subject is in focus, the focus indication C lights.
Page 62: Recording Videos
3. Basic Operations Recorded pictures can be displayed automatically by setting [Auto Review] of the [Custom] ([Monitor / Display (Photo)]) menu. You can also change the picture display duration to your preferred setting. (l 430) With the default settings, you cannot take a picture until the subject is brought into focus.
Page 63: Selecting The Recording Mode
3. Basic Operations Selecting the Recording Mode While pressing the mode dial lock button 1, rotate the mode dial 2.   [iA] Intelligent Auto mode (l 81) Programme AE mode (l 186) Aperture-Priority AE mode (l 188) Shutter-Priority AE mode (l 191) Manual Exposure mode (l 193) Creative Video mode (l 247) [C1]/[C2]/[C3]...
Page 64: Camera Setting Operations
3. Basic Operations Camera Setting Operations When changing the camera settings, operate the camera using the following operation parts. To prevent accidental operation, you can disable operation with the operation lock lever. Front dial (l 65) Rear dial (l 65) Control dial (l 65) Cursor buttons (l 65) [MENU/SET] button (l 65)
Page 65 3. Basic Operations Front Dial ( )/Rear Dial ( Rotate: Selects an item or numeric value. Sets the aperture, shutter speed, and other settings when you are recording in the [P]/[A]/ [S]/[M] modes. The operation method can be changed in [Dial Set.].
Page 66 3. Basic Operations Joystick (3421/ The joystick can be operated in 8 directions by tilting it up, down, left, right and diagonally and by pressing the centre part. A Tilt: Selects an item or numeric value, or moves a position. Place your finger on the centre of the joystick before tilting.
Page 67 3. Basic Operations Touch the screen with clean and dry fingers. If you will use a commercially available monitor protection sheet, observe the precautions for the sheet. (Visibility and operability may be impaired depending on the type of monitor protection sheet.) The touch screen may not operate correctly in the following cases: –...
Page 68: Display Settings
3. Basic Operations Display Settings Setting the Viewfinder Adjusting the Viewfinder Dioptre Rotate the dioptre adjustment dial while looking through the viewfinder. Adjust until you can clearly see the text on the viewfinder. Switching the Viewfinder Display Magnification Press [V.MODE]. ≥The display magnification of the viewfinder can be switched between 3 levels.
Page 69: Switching Between The Monitor And Viewfinder
3. Basic Operations Switching Between the Monitor and Viewfinder With the default settings, automatic viewfinder/monitor switching is set. When you look through the viewfinder, the eye sensor works and the camera switches from monitor display to viewfinder display. You can switch to viewfinder display or monitor display with [LVF] button Press [LVF].
Page 70: Switching The Display Information
3. Basic Operations Switching the Display Information The recording information (icons) on the recording screen and playback screen can be hidden. The monitor on the back can display the control panel, be turned off, etc. Press [DISP.]. ≥The display information is switched. Recording Screen Monitor Without...
Page 71 3. Basic Operations Press [ ] to switch between display/hide of the level gauge. This can also be set by using [Level Gauge]. (l 438) Control panel operation (l 75) You can hide the control panel and black screen: [Show/Hide Monitor Layout] (l 439) The display can be changed so that live view and display information do not overlap: [LVF/Monitor Disp.
Page 72: Turning On The Status Lcd Backlight
3. Basic Operations Turning On the Status LCD Backlight Set the camera on/off switch to ≥The backlight will turn on. ≥When you release the camera on/off switch, it returns to the [ON] position. ≥If the camera is left without any operations for a certain period of time, the backlight turns off.
Page 73: Quick Menu
3. Basic Operations Quick Menu This menu enables you to quickly set functions that are frequently used during recording without calling up the menu screen. You can also change the Quick menu display method and the items to display. Display the Quick menu. ≥Press [Q].
Page 74 3. Basic Operations Some items cannot be set depending on the recording mode or camera settings. The Quick menu can be customised: [Q.MENU Settings] (l 378)
Page 75: Control Panel
3. Basic Operations Control Panel This screen allows you to view the current recording settings on the monitor. You can also touch the screen to change the settings. In the [ ] mode (Creative Video mode), the display changes to one especially for video.
Page 76 3. Basic Operations Changing Directly Using the Dial AUTO Steps can also be changed using the following operations. FINE Press one of 3421 to enable selection of items. 0 Selected items are displayed in yellow. AUTO Press 3421 to select an item. 0 Selection is also possible by rotating FINE Rotate...
Page 77: Menu Operation Methods
3. Basic Operations Menu Operation Methods In this camera, the menu is used for setting a wide variety of functions and performing camera customisations. Menu operations can be performed using the cursors, joystick, dial, or by touch. Configuration and operation parts of the menu The menu can be operated by pressing 21 to move between menu screens.
Page 78 3. Basic Operations Select a main tab. ≥Press 34 to select a main tab and then press 1. ≥You can also perform the same operation by rotating to select the main tab and then pressing Select a sub tab. ≥Press 34 to select a sub tab and then press 1.
Page 79 3. Basic Operations Select a setting item and then confirm your selection. ≥Press 34 to select a setting item and then press ≥You can also perform the same operation by rotating to select the setting item and then pressing The display and selection methods of setting items differ depending on the menu item.
Page 80: [Reset]
3. Basic Operations Greyed Out Menu Items Menu items that cannot be set are displayed greyed out. If you press while a greyed out menu item is selected, the reason why it cannot be set is displayed. The reason why a menu item cannot be set may not be displayed depending on the menu item.
Page 81: Intelligent Auto Mode
3. Basic Operations Intelligent Auto Mode The [iA] mode (Intelligent Auto mode) can record images using settings automatically selected by the camera. The camera detects the scene to set the optimal recording settings automatically to match the subject and recording conditions. Set the mode dial to [iA].
Page 82 3. Basic Operations Start recording. ≥Press the shutter button fully. Backlight compensation operates automatically to prevent subjects from appearing dark when there is a backlight. Types of Automatic Scene Detection : Scenes detected during picture taking : Scenes detected during video recording i-Portrait &...
Page 83 3. Basic Operations If none of the scenes are applicable, recording is with [ ] (standard setting). Different scene types may be selected for the same subject depending on the recording conditions. AF Mode Changing the AF mode. Each press of [ ] changes the AF mode.
Page 84: Recording Using Touch Functions
3. Basic Operations Recording Using Touch Functions Touch AF/Touch Shutter Touch functions allow you to focus on the point that you touch, release the shutter, etc. With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu.
Page 85: Touch Ae
3. Basic Operations When the Touch Shutter fails, the AF area first turns red and then disappears. Refer to “Operations on the AF area movement screen” on page information about operations to move the AF area. It is also possible to optimise the focus and brightness on the touched position: [Touch Settings] [Touch AF]...
Page 86 3. Basic Operations Touch the subject to which you wish to adjust the brightness. To return the position to which to adjust the brightness to the centre, touch [Reset]. Touch [Set]. How to Disable Touch AE Touch [ When the following function is being used, Touch AE is not available: –...
Page 87: Image Recording
Image Recording [Aspect Ratio] You can select the image aspect ratio. Select [Aspect Ratio] [4:3] Aspect ratio of a 4:3 monitor [3:2] Aspect ratio of a standard film camera [16:9] Aspect ratio of a 16:9 TV [1:1] Square aspect ratio [65:24] Panoramic aspect ratio [2:1]...
Page 88: [Picture Size]
4. Image Recording [Picture Size] Sets the picture’s image size. The image size varies depending on the [Aspect Ratio] or the lens used. When a Super 35 mm/APS-C lens is used, the image area switches to the one for Super 35 mm/APS-C, thereby narrowing the angle of view. Select [Picture Size] Picture size [Aspect...
Page 89 4. Image Recording When the following functions are being used, [Picture Size] is not available: – [6K/4K PHOTO]/[Post-Focus] – [RAW] ([Picture Quality]) – [High Resolution Mode] – [Multiple Exposure] You can register functions to Fn buttons: [Fn Button Set] [Setting in REC mode] [Picture Size] (l 367)
Page 90: [Picture Quality]
4. Image Recording [Picture Quality] Set the compression rate used for storing pictures. Select [Picture Quality] Setting File format Settings details [FINE] JPEG images that give priority to image quality. JPEG images of standard image quality. JPEG This is useful for increasing the number of [STD.] recordable pictures without changing the picture size.
Page 91 4. Image Recording Note on RAW RAW format refers to a data format of images that have not been processed on the camera. Playback and editing of RAW images require the camera or the dedicated software. You can process RAW images on the camera. (l 359) Use software (“SILKYPIX Developer Studio”...
Page 92: [Double Card Slot Function]
4. Image Recording [Double Card Slot Function] This sets the way recording to the card slots 1 and 2 is performed. Select [Double Card Slot Function] Selects the priority of card slots for recording. [Destination Card Slot]: [ [Relay Rec] Relays recording to the card in the other card slot after the first card runs out of free space.
Page 93: [Folder / File Settings]
4. Image Recording [Folder / File Settings] Set the folder and file name where to save the images. Folder name File name 100ABCDE PABC0001.JPG       Colour space 1 Folder number (3 digits, 100 to 999) ([P]: sRGB, [ _ ]: AdobeRGB) 2 5-character user-defined segment 4 3-character user-defined segment...
Page 94 4. Image Recording Each folder can store up to 1000 files. File numbers are assigned sequentially from 0001 to 9999 in the order of recording. If you change the storage folder, a number continuing on from the last file number will be assigned. In the following cases, a new folder with an incremented folder number will be created automatically when the next file is saved: –...
Page 95: [File Number Reset]
4. Image Recording [File Number Reset] Refresh the folder number to reset the file number to 0001. Select [File Number Reset] Settings: [Card Slot 1]/[Card Slot 2] When the folder number reaches 999, the file number cannot be reset. We recommend backing up your data and formatting the card. To reset the folder number to 100: 1 Perform [Card Format] to format the card.
Page 96: Focus/Zoom
Focus/Zoom Selecting the Focus Mode Select the focusing method (focus mode) to match subject movement. Set the focus mode lever. This is suitable for recording still subjects. When the shutter button is pressed halfway, the camera focuses ([AFS]) once. The focus stays locked while the shutter button is pressed halfway. This is suitable for recording moving subjects.
Page 97: Using Af
5. Focus/Zoom Using AF AF (Auto Focus) refers to automatic focusing. Select the focus mode and the AF mode appropriate for the subject and scene. Set the focus mode to [S] or [C]. ≥Set the focus mode lever. (l 96) Select the AF mode.
Page 98 5. Focus/Zoom Focus In focus Not in focus Focus icon A Lights Blinking AF area B Green AF beep Two beeps — Low illumination AF In dark environments, low illumination AF automatically operates, and the focus icon is indicated as [ Achieving focus may take more time than usual.
Page 99 5. Focus/Zoom Subjects and recording conditions that make focusing difficult with AF mode – Fast-moving subjects – Extremely bright subjects – Subjects without contrast – Subjects recorded through windows – Subjects near shiny objects – Subjects in very dark locations –...
Page 100 5. Focus/Zoom Magnify the AF Area Position ([AF-Point Scope]) This magnifies the focus point when the AF mode is [ ], [ ], or [ ]. (In other AF modes, the centre of the screen is magnified.) You can check focus and observe an enlarged subject as with a telephoto lens.
Page 101: [Af Custom Setting(Photo)]
5. Focus/Zoom [AF Custom Setting(Photo)] Select features of AF operation when recording using [AFC] that are appropriate for the subject and scene. Each of these features can be further customised. Set the focus mode to [AFC]. (l 96) Set [AF Custom Setting(Photo)].
Page 102 5. Focus/Zoom Adjusting AF Custom Settings Press 21 to select the AF Custom setting type. Press 34 to select items and press 21 to adjust. To reset settings to the default, press [DISP.]. Press Sets the tracking sensitivity for the movement of subjects. When the distance to the subject changes drastically, the camera re-adjusts the focus immediately.
Page 103: Selecting The Af Mode
5. Focus/Zoom Selecting the AF Mode Select the focusing method to match the position and number of subjects. Press [ ≥The AF mode selection screen appears. Select the AF mode. ≥Press 21 to select an item and then press ≥Selection is also possible by pressing [ [Face/Eye/Body/ Animal Detect.]...
Page 104 5. Focus/Zoom In [Time Lapse Shot], [ ] cannot be used. When the focus mode is set to [AFC], [ ] is not available. When the following function is being used, the AF mode is fixed to [ ] (face detection): –...
Page 105: [Face/Eye/Body/Animal Detect.]
5. Focus/Zoom [Face/Eye/Body/Animal Detect.] The camera detects a person’s face, eyes, and body (entire body or upper half of the body) and adjusts the focus. With the default settings, animal detection will also operate, enabling detection of animals, such as birds, canines (including wolves), and felines (including lions).
Page 106 5. Focus/Zoom Specify the Person, Animal, or Eye to Bring into Focus When the person or animal to be brought into focus is shown using the white AF area, you can change this to a yellow AF area. ≥Touch operation Touch the person, animal or eye indicated with the white AF area.
Page 107 5. Focus/Zoom Move and Change the Size of the Yellow AF Area You can move the yellow AF area to the position of the white AF area and replace the white AF area with the yellow AF area. If moving to a position outside an AF area, then the [ ] AF area will be set.
Page 108: [Tracking]
5. Focus/Zoom [Tracking] When the focus mode is set to [AFC], the AF area follows the movement of the subject, maintaining focusing. Start tracking. ≥Aim the AF area over the subject, and press the shutter button halfway. The camera will track the subject while the shutter button is pressed halfway or pressed fully.
Page 109 5. Focus/Zoom Move the Position of the AF Area Press [ ] to display the AF mode selection screen. Select [ ] and then press 4. Press 3421 to move the position of the AF area. Positions can be moved to the diagonal directions using the joystick. You can also move the AF area by touching.
Page 110: [225-Area]
5. Focus/Zoom [225-Area] The camera selects the most optimal AF area to focus from 225 areas. When multiple AF areas are selected, all selected AF areas will be brought into focus. When the focus mode is set to [AFC], ensuring that the subject stays within the 225 areas during recording will ensure the subject stays in focus.
Page 111: [Zone (Vert./ Horz.)]/ [Zone (Square)]/ [Zone (Oval)]
5. Focus/Zoom [Zone (Vert./ Horz.)]/ [Zone (Square)]/ [Zone (Oval)] [Zone (Vert./ Horz.)] Within the 225 AF areas, vertical and horizontal zones can be focused. Horizontal pattern Vertical pattern [Zone (Square)] Within the 225 AF areas, a central square zone can be focused. [Zone (Oval)] Within the 225 AF areas, a central oval zone can be focused.
Page 112 5. Focus/Zoom Move and Change the Size of the AF Area Press [ ] to display the AF mode selection screen. Select [ ], [ ] or [ ] and then press 4. Press 3421 to move the position of the AF area.
Page 113: [1-Area+]/ [1-Area]
5. Focus/Zoom [1-Area+]/ [1-Area] [1-Area+]  Emphasis within a single AF area can be focused. Even when the subject moves out of the single AF area, the subject remains focused in a supplementary AF area (A). Effective when recording moving subjects that are difficult to track with [ [1-Area] Specify the point to be brought into focus.
Page 114: [Pinpoint]
5. Focus/Zoom Move and Change the Size of the AF Area Press [ ] to display the AF mode selection screen. Select [ ] or [ ] and then press 4. Press 3421 to move the position of the AF area. Rotate to change the size of the AF area.
Page 115 5. Focus/Zoom Move the Position of the AF Area Press [ ] to display the AF mode selection screen. Select [ ] and then press 4. Press 3421 to set the position of [i] and then press Positions can be moved to the diagonal directions using the joystick. The selected position on the screen will be enlarged.
Page 116: [Custom1] To [Custom3]
5. Focus/Zoom When the picture is displayed in windowed mode, you can enlarge the picture by approx. 3k to 6k; when the picture is displayed in full screen, you can enlarge the picture by approx. 3k to 10k. You can also take a picture by touching [ When the following functions are being used, [ ] switches to [Ø]: –...
Page 117 5. Focus/Zoom Select the AF area. Touch operation ≥ Touch the area to make the AF area. To select consecutive points, drag the screen. To cancel selection of the selected AF area, touch it again. Button operation ≥ Press 3421 to select the AF area and then set with (Repeat this) Positions can be moved to the diagonal directions using the joystick.
Page 118: Af Area Movement Operation
5. Focus/Zoom AF Area Movement Operation In default settings, you can use the joystick to directly move and change the size of the AF area when recording. Move the position of the AF area. ≥On the recording screen, tilt the joystick.
Page 119: Moving The Af Area By Touch
5. Focus/Zoom Confirm your selection. ≥Press the shutter button halfway. ≥This will return you to the recording screen. When [Metering Mode] is [ ], the metering target also moves together with the AF area. In [ ], [ ], [ ], and [ ] to [ ], the size of the AF area cannot be...
Page 120 5. Focus/Zoom Focus on the Touched Position ([AF]) Touch the subject. The AF area moves to the touched position. Pinch out/pinch in to change the AF area size. The first touch of [Reset] returns the AF area position to the centre. The second touch returns the size of the AF area to the default.
Page 121: Moving The Af Area Position With The Touch Pad
5. Focus/Zoom Moving the AF Area Position with the Touch Pad During viewfinder display, you can touch the monitor to change the position and size of the AF area. Set [Touch Pad AF]. [Touch ≥ Settings] [Touch Pad AF] [EXACT]/[OFFSET1] to [OFFSET7] Move the position of the AF area.
Page 122: [Focus Switching For Vert / Hor]
5. Focus/Zoom Setting Items ([Touch Pad AF]) Moves the AF area of the viewfinder by [EXACT] touching a desired position on the touch pad. Moves the AF area of the viewfinder according to the distance you drag [OFFSET1] your finger on the touch pad.
Page 123: Record Using Mf
5. Focus/Zoom Record Using MF MF (Manual Focus) refers to manual focusing. Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate AF.
Page 124 5. Focus/Zoom Adjust the focus. ≥Rotate the focus ring. A MF Assist (enlarged screen) This will display the in-focus portion highlighted with colour. (Focus Peaking   A recording distance guideline is displayed. (MF Guide C) D Indicator for ¶ (infinity) 0.5 0.1 ∞...
Page 125 5. Focus/Zoom Operations on the MF Assist Screen Button Touch Description of operation operation operation Moves the enlarged display position. Drag Positions can be moved to the diagonal 3421 directions using the joystick. Pinch out/ Enlarges/reduces the screen in small steps. pinch in Enlarges/reduces the screen.
Page 126 5. Focus/Zoom On the recording screen, you can rotate the focus ring to display the MF Assist screen. If the focus ring has been rotated to enlarge the display, the assist screen will be exited a short time after you cease the operation. You can also display the MF Assist screen by pressing the [ During MF, pressing [AF ON] will activate AF.
Page 127: Recording With Zoom
5. Focus/Zoom Recording with Zoom Use the optical zoom of the lens to zoom to telephoto or wide-angle. When taking pictures, use [Ex. Tele Conv.] to increase a telescopic effect without image deterioration. When recording videos, use [Image Area of Video] to obtain the same telescopic effect as [Ex.
Page 128: Extra Tele Conversion
5. Focus/Zoom Extra Tele Conversion [Ex. Tele Conv.] enables you to take pictures that are further enlarged beyond what is available with the optical zoom, without any deterioration in image quality. The [Ex. Tele Conv.] maximum magnification ratio differs depending on the [Picture Size] set in the [Photo] ([Image Quality]) menu.
Page 129 5. Focus/Zoom Changing the Zoom Magnification Button operation Set [Ex. Tele Conv.] to [ZOOM]. [Ex. Tele Conv.] [ZOOM] Set the Fn button to [Zoom Control]. (l 367) Press the Fn button. Press the cursor buttons to operate the zoom. 31: T (telephoto) 24: W (wide-angle) Press the Fn button again, or wait a EX1.8x...
Page 130 5. Focus/Zoom Drag the slide bar to operate the zoom.  T: Telephoto W: Wide-angle To end Touch Zoom operations, touch ] again.          You can register functions to Fn buttons: [Fn Button Set] [Setting in REC mode] [Ex.
Page 131: Drive/Shutter/Image Stabiliser
Drive/Shutter/Image Stabiliser Selecting the Drive Mode You can switch the drive mode to Single, Burst, etc. to match the recording conditions. Rotating the drive mode dial. Takes one picture each time the shutter button is Single pressed. Takes pictures continuously while the shutter Burst button is pressed and held.
Page 132: Taking Burst Pictures
6. Drive/Shutter/Image Stabiliser Taking Burst Pictures Takes pictures continuously while the shutter button is pressed and held. You can choose a burst setting which enables burst recording in high image quality, [H], [M] or [L], or one which enables high-speed burst recording, [ ] (6K/4K photo), to suit the recording conditions.
Page 133 60 frames or more (Medium speed) (Low speed) When recording under the test conditions specified by Panasonic. Recording conditions may reduce the maximum number of frames recordable. The burst rate will become lower during recording but pictures can continue to be...
Page 134 6. Drive/Shutter/Image Stabiliser Number of Pictures That Can Be Taken Continuously When you press the shutter button halfway, the number of pictures that can be taken continuously will appear on the recording screen and the status LCD. Example) When 20 frames: [r20] Once recording starts, the number of pictures that can be taken continuously will decrease.
Page 135 6. Drive/Shutter/Image Stabiliser Exposure when Taking Burst Pictures Focus mode [M]/[L] Fixed to the exposure of [AFS] the first frame The exposure is adjusted The exposure is adjusted [AFC] for each frame for each frame Fixed to the exposure of [MF] the first frame It may take a while to save burst pictures.
Page 136: 6K/4K Photo Recording
6. Drive/Shutter/Image Stabiliser 6K/4K Photo Recording With 6K Photo, you can take high-speed burst pictures at 30 frames/ second and save the desired pictures, each made up of approx. 18 million pixels, extracted from their burst file. With 4K photo, you can take high-speed burst pictures at 60 frames/ second and save the desired pictures, each made up of approx.
Page 137 6. Drive/Shutter/Image Stabiliser Select [Picture Size / Burst Speed]. [6K/4K ≥ PHOTO] [Picture Size / Burst Speed] Picture size Burst rate [Rec Quality] ¢ [4:3]: 4992k3744 30 frames/ [6K 18M] [6K/200M/30p] [3:2]: 5184k3456 second 60 frames/ [4:3]: 3328k2496 [4K H 8M] [4K/150M/60p] second [3:2]:...
Page 138 6. Drive/Shutter/Image Stabiliser When you wish to capture an unpredictable photo opportunity Starts taking burst pictures when the shutter button ([6K/4K Burst(S/S)]) is pressed. Pressing the button again stops taking “S/S” is an abbreviation burst pictures. for start/stop. The start tone and stop tone are output. Audio recording: Available ¢...
Page 139 6. Drive/Shutter/Image Stabiliser [6K/4K Burst(S/S)] Press the shutter button fully to start recording. Press the shutter button fully again to stop recording. C Start (First) D Stop (Second) E Recording is performed You can add markers by pressing [Q] during recording. (Up to 40 markers per recording) This allows you to skip to the positions where you added markers when selecting pictures from a 6K/4K burst file.
Page 140 6. Drive/Shutter/Image Stabiliser [Pre-Burst Recording] ([6K/4K Burst]/[6K/4K Burst(S/S)]) The camera starts recording approx. 1 second before the shutter button is pressed fully, so you will not miss a photo opportunity. [6K/4K PHOTO] Select [Pre-Burst Recording] Settings: [ON]/[OFF] When [Pre-Burst Recording] is being used, [PRE] is displayed on the recording screen.
Page 141 6. Drive/Shutter/Image Stabiliser The following functions are restricted when recording 6K/4K photos when connected to an external device (TV, etc.) via HDMI: – HDMI output is not possible during recording. – [6K/4K Pre-Burst] changes to [6K/4K Burst]. – [Pre-Burst Recording] is not available. 6K/4K photo recording does not work while you are using the following functions: –...
Page 142: Selecting Pictures From A 6K/4K Burst File
6. Drive/Shutter/Image Stabiliser Selecting Pictures from a 6K/4K Burst File You can select pictures from the 6K/4K burst files and save them. 0 When continuing to select pictures from the Auto Review after recording 6K/4K photos, start the operation from either Step Select a 6K/4K burst file on the playback screen.
Page 143: Correcting Pictures After Recording (Post-Recording Refinement)
6. Drive/Shutter/Image Stabiliser Save the picture. ≥Touch [ ] or [ ≥A confirmation screen appears. The picture is saved in JPEG format ([FINE] picture quality). The recording information (Exif information), such as the shutter speed, aperture, and ISO sensitivity, is also saved with the picture that is saved. Correcting Pictures After Recording (Post-Recording Refinement) Correcting Distortion in Pictures ([Reduce Rolling...
Page 144: Picture Selection Operations
6. Drive/Shutter/Image Stabiliser Reducing Noise Caused by High Sensitivity ([6K/4K PHOTO Noise Reduction]) When saving pictures, reduce the noise that occurs due to high ISO sensitivity. Select [6K/4K PHOTO Noise Reduction] Settings: [AUTO]/[OFF] This is not applied to pictures saved with [6K/4K PHOTO Bulk Saving]. Picture Selection Operations Picture Selection Slide View Screen Operations A Slide bar...
Page 145 6. Drive/Shutter/Image Stabiliser Button Touch Description of operation operation operation Selects a frame. Drag/ To change the frames displayed in the picture selection slide view, select the frame at the left/ right end and then touch [ ] or [ Continuously rewinds or forwards frame-by- Press and Touch and hold...
Page 146 6. Drive/Shutter/Image Stabiliser 6K/4K Burst Playback Screen Operations While paused During continuous playback Button Touch Description of operation operation operation Performs continuous playback or pauses (during continuous playback). Performs continuous rewind playback or pauses (during continuous rewind playback). Performs fast-forward playback or performs frame-by-frame forwarding (while paused).
Page 147 6. Drive/Shutter/Image Stabiliser Displays the in-focus portion highlighted with colour ([Focus Peaking]). [ON]/[OFF] switches. Saves the picture (while paused). During marker operation, you can skip to set markers or the beginning or end of the 6K/4K burst file. Touch [ ] to return to the previous operation.
Page 148 6. Drive/Shutter/Image Stabiliser [6K/4K PHOTO Bulk Saving] You can save any 5 second period of pictures from a 6K/4K burst file all at once. Select [6K/4K PHOTO Bulk Saving]. [6K/4K PHOTO Bulk Saving] Press 21 to select a 6K/4K burst file and then press If the burst time is 5 seconds or less, all frames are saved as pictures.
Page 149: Recording With Time Lapse Shot
6. Drive/Shutter/Image Stabiliser Recording with Time Lapse Shot Pictures are taken automatically at a set recording interval. This feature is ideal for keeping track of changes over time in subjects such as animals and plants. The pictures taken will be saved as a set of group images that can also be combined into a video.
Page 150 6. Drive/Shutter/Image Stabiliser Set the recording settings. Switches between Time Lapse Shot and Stop Motion [Mode] Animation. Sets the interval before the next [ON] recording takes place. [Shooting Interval Setting] Takes pictures without leaving [OFF] recording intervals. Starts recording when the shutter [Now] button is pressed fully.
Page 151 6. Drive/Shutter/Image Stabiliser Create a video. (l 156) After the recording has stopped, select [Yes] on the confirmation screen to proceed to create a video. Even if you select [No], you can still create a video with [Time Lapse Video] in the [Playback] ([Process Image]) menu.
Page 152 6. Drive/Shutter/Image Stabiliser Pictures recorded to more than one card cannot be combined into a single video. Pictures taken with [HLG Photo] cannot be converted to videos. The camera gives priority to achieving the correct exposure, so it may not take pictures at the set interval or take the set number of pictures.
Page 153: Recording With Stop Motion Animation
6. Drive/Shutter/Image Stabiliser Recording with Stop Motion Animation Take pictures while moving the subject little by little. The pictures taken will be saved as a set of group images that can be combined into a stop motion video. Set the drive mode dial to Set [Mode] to [Stop Motion Animation].
Page 154 6. Drive/Shutter/Image Stabiliser Close the menu. ≥Press the shutter button halfway. Start recording. ≥Press the shutter button fully. ≥Take pictures repeatedly while moving the subject little by little. The recording screen displays up to two pictures taken previously. Use them as reference for the amount of movement.
Page 155 6. Drive/Shutter/Image Stabiliser Pictures taken with [HLG Photo] cannot be converted to videos. Up to 9999 frames can be recorded. If the camera is turned off while recording, a message for resuming the recording is displayed when it is turned on. Selecting [Yes] allows you to continue the recording from the interruption point.
Page 156: Time Lapse Shot/Stop Motion Animation Videos
6. Drive/Shutter/Image Stabiliser Time Lapse Shot/Stop Motion Animation Videos After performing Time Lapse Shot or stop motion recording, you can proceed to create a video. Refer to the sections below about these recording functions. – Time Lapse Shot recording: l –...
Page 157 6. Drive/Shutter/Image Stabiliser Videos cannot be created when the [System Frequency] is set to [24.00Hz (CINEMA)]. Videos cannot be created if the recording time exceeds 29 minutes and 59 seconds. In the following cases, videos cannot be created if the file size exceeds 4 GB: –...
Page 158: Recording Using The Self-Timer
6. Drive/Shutter/Image Stabiliser Recording Using the Self-timer Set the drive mode dial to [ Decide on the composition and then adjust the focus. ≥Press the shutter button halfway. The focus and exposure are fixed when the shutter button is pressed halfway. Start recording.
Page 159 6. Drive/Shutter/Image Stabiliser Setting the Self-timer Time Select [Self Timer] Takes a picture after 10 seconds. Takes 3 pictures at approx. 2 second intervals after 10 seconds. Takes a picture after 2 seconds. This setting is a convenient way to avoid camera shake caused by pressing the shutter button.
Page 160: Bracket Recording
6. Drive/Shutter/Image Stabiliser Bracket Recording When the shutter button is pressed, the camera can record multiple images while automatically changing the setting value for exposure, aperture, focus or white balance (adjustment value or colour temperature). Aperture Bracket can be selected in the following modes: –...
Page 161 6. Drive/Shutter/Image Stabiliser Setting Items ([Bracketing Type]) When the shutter button is pressed, the camera Exposure Bracket records while changing the exposure. (l 163) When the shutter button is pressed, the camera Aperture Bracket records while changing the aperture value. (l 163) When the shutter button is pressed, the camera ] Focus Bracket...
Page 162 6. Drive/Shutter/Image Stabiliser When [Aspect Ratio] is set to [65:24]/[2:1], only the Exposure Bracket can be used. White Balance Bracket and White Balance Bracket (Colour Temperature) are not available when using the following functions: – [iA] mode – Taking burst pictures –...
Page 163 6. Drive/Shutter/Image Stabiliser [More Settings] (Exposure Bracket) Sets the image count and exposure compensation step. [Step] [3•1/3] (record 3 images in 1/3 EV steps) to [7•1] (record 7 images in 1 EV steps) [Sequence] Sets the order in which images are recorded. ]: Takes only one image each time the shutter button is pressed.
Page 164 6. Drive/Shutter/Image Stabiliser [More Settings] (Focus Bracket) Sets the focus adjustment step. [Step] The distance that the focus point is moved becomes shorter if the initial focus point is close, and longer if it is far away. Sets the image count. [Image Count] This cannot be set when taking burst pictures.
Page 165 6. Drive/Shutter/Image Stabiliser [More Settings] (White Balance Bracket) Rotate to set the G G G G G G G correction step and then press Rotate to the right: A A A A A A B B B B B B B Horizontal direction ([A] - [B]) Rotate to the left: M M M M M M...
Page 166: Post-Focus Recording
6. Drive/Shutter/Image Stabiliser Post-Focus Recording Taking burst pictures with the same image quality as 6K/4K photos while automatically changing the focus point. You can select the focus point for the picture to save after recording. Also Focus Stacking lets you combine images with multiple focus points. This function is suitable for subjects that do not move.
Page 167 6. Drive/Shutter/Image Stabiliser Close the menu. ≥Press the shutter button halfway. Decide on the composition and then adjust the focus. ≥Press the shutter button halfway. ≥AF detects the focus point on the ± screen. (Excluding the edges of the  screen) If no areas on the screen can be brought into focus, the focus indication A blinks and recording is not possible.
Page 168 6. Drive/Shutter/Image Stabiliser Since recording is performed with the same image quality as 6K/4K photos, limitations apply to recording functions and menus. Focus settings cannot be changed during Post-Focus recording. When using Super 35 mm/APS-C lenses, [6K 18M] is not available. When the following functions are being used, [Post-Focus] is not available: –...
Page 169: Selecting The Focus Point For The Picture To Save
6. Drive/Shutter/Image Stabiliser Selecting the Focus Point for the Picture to Save Select a Post-Focus image on the playback screen. (l 347) ≥Select an image with the [ icon and then press 3. ≥You can also perform the same operation by touching the [ icon.
Page 170 6. Drive/Shutter/Image Stabiliser Focus Point Selection Operations Button Touch Description of operation operation operation Selects a focus position. 3421/ Touch Selection is not possible during enlarged display. Enlarges the display. During enlarged display, you can fine-adjust the focus by dragging the slide bar. (You can also perform the same operation by pressing 21.) Reduces the display (during enlarged display).
Page 171: Focus Stacking
6. Drive/Shutter/Image Stabiliser Focus Stacking By merging multiple focus points, you can save pictures that are focused from the foreground through to the background. A Focus: closer B Focus: more distant On the screen for selecting the focus point in Step page 169, touch [ ≥You can also perform the same operation by pressing [...
Page 172 6. Drive/Shutter/Image Stabiliser (When [Range Merging] is selected) Touch the focus points. Select at least two points. Selected points are indicated with a green frame. The in-focus range between the two selected points is displayed in green. Ranges that cannot be selected are displayed in grey.
Page 173 6. Drive/Shutter/Image Stabiliser Operations when [Range Merging] Is Selected Button Touch Description of operation operation operation 3421 / Touch Selects a point. [Set/Cancel] Sets or cancels a point. Selects all points. [All] (Before selecting points) [DISP.] Cancels all selections. [Reset] (After selecting points) Merges the pictures and saves the resulting picture.
Page 174: [Silent Mode]
6. Drive/Shutter/Image Stabiliser [Silent Mode] This disables all operation sounds and light output at once. The audio from the speaker will be muted and the flash and the AF assist light will be set to forced off mode. The following settings are fixed: –...
Page 175: [Shutter Type]
6. Drive/Shutter/Image Stabiliser [Shutter Type] Selects the shutter type to use for taking pictures. Select [Shutter Type] Switches the shutter type automatically depending on the [AUTO] recording conditions and shutter speed. [MECH.] Records with the mechanical shutter type. [EFC] Records with the electronic front curtain type. [ELEC.] Records with the electronic shutter type.
Page 176 6. Drive/Shutter/Image Stabiliser The electronic front curtain type reduces blur caused by the shutter because the amount of vibration from the shutter is small compared to the mechanical shutter type. The electronic shutter type allows you to record without vibration from the shutter. To reduce shutter-induced blur, you can set the shutter to release a few seconds after the shutter button is pressed: [Shutter Delay] (l 406)
Page 177: Image Stabiliser
Combinations of lenses and image stabilisers (As of August 2019) Image stabilisers that can be used will differ depending on the attached lens. Available image Attached lens Example of icon stabiliser Panasonic lenses with image BodyrLens stabilisation function (Dual I.S.2) Other manufacturer’s lenses with image stabilisation Body or Lens...
Page 178 6. Drive/Shutter/Image Stabiliser Using the Image Stabiliser When using a lens with an O.I.S. switch, set the switch on the lens to [ON]. When using a lens that does not have a communication function with this camera, after turning on the camera, a message asking for confirmation of the lens information is displayed.
Page 179: Image Stabiliser Settings
6. Drive/Shutter/Image Stabiliser Image Stabiliser Settings Set the image stabiliser operation to match the recording situation. Select [Image Stabilizer] Sets the stabilisation movement (blur) to match the [Operation Mode] recording method (normal, panning). (l 181) ] ([Body]) Uses the in-body image stabiliser. [Body(B.I.S.) / ] ([Lens]) Uses the in-lens image stabiliser.
Page 180 6. Drive/Shutter/Image Stabiliser When the following functions are being used, [When to Activate] is fixed to [ALWAYS]: – [ ] ([Body(B.I.S.) / Lens(O.I.S.)]) – [ ] mode – Video recording/[6K/4K PHOTO]/[Post-Focus] When the following functions are being used, [E-Stabilization (Video)] is not available: –...
Page 181 6. Drive/Shutter/Image Stabiliser [Operation Mode] Set the stabilisation movement (blur) to match the recording method (normal, panning). Corrects vertical, horizontal, and rotational camera shake. [Normal] This function is suitable for normal recording. Automatically detects the panning direction, and corrects [Panning (Auto)] vertical and horizontal camera shake.
Page 182 6. Drive/Shutter/Image Stabiliser [Boost I.S. (Video)] Increase the effectiveness of the image stabiliser during video recording. This effect can help provide a stable composition when you want to perform recording from a fixed perspective. Settings: [ON]/[OFF] When [Boost I.S. (Video)] is operating, [ ] is displayed on the recording screen.
Page 183 6. Drive/Shutter/Image Stabiliser [Lens Information] Register the information for lenses that cannot communicate with the camera. Match the in-body image stabiliser with the information of the lens you register. The settings on this camera enable you to switch settings to suit full-frame or Super 35 mm/APS-C lenses.
Page 184 6. Drive/Shutter/Image Stabiliser Select the image circle for the lens. [Image Circle] [FULL]: Full-frame lens [S35mm]: Lens for Super 35 mm/lens for APS-C Enter the focal length. [Focal Length] The live view images can be enlarged for display when you rotate You can set the range of stabilisation for the image stabiliser so that vignetting does not occur due to the image stabiliser.
Page 185: Metering/Exposure/Iso Sensitivity
Metering/Exposure/ISO Sensitivity [Metering Mode] Type of optical measurement to measure brightness can be changed. Select [Metering Mode] Method in which the most suitable exposure is (Multi-metering) measured by judging the allocation of brightness on the whole screen. (Centre- Method used to perform measuring which focuses on weighted) the centre of the screen.
Page 186: Programme Ae Mode
7. Metering/Exposure/ISO Sensitivity Programme AE Mode In [P] mode (Programme AE mode), the camera automatically sets the shutter speed and aperture value for the brightness of the subject. You can also use Programme Shift to change combinations of shutter speed and aperture values while keeping the same exposure. Set the mode dial to [P].
Page 187 7. Metering/Exposure/ISO Sensitivity Programme Shift You can change the shutter speed and aperture value combination set automatically by the camera while maintaining the same exposure. With this, you can, for example, make the background more defocused by decreasing the aperture value or capture a moving subject more dynamically by slowing the shutter speed.
Page 188: Aperture-Priority Ae Mode
7. Metering/Exposure/ISO Sensitivity Aperture-Priority AE Mode In [A] mode (Aperture-Priority AE mode), you can set the aperture value before recording. The shutter speed will be automatically set by the camera. Smaller aperture values Larger aperture values It becomes easier to defocus the It becomes easier to bring everything into background.
Page 189 7. Metering/Exposure/ISO Sensitivity Set the aperture value. ≥Rotate Start recording. If the correct exposure is not achieved when the shutter button is pressed halfway, the aperture value and the shutter speed blink red. Depth of Field Characteristics Aperture value Small Large Focal length of lens Telephoto...
Page 190 7. Metering/Exposure/ISO Sensitivity The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview]. (l 196) The brightness of the recording screen and of actual recorded images may differ.
Page 191: Shutter-Priority Ae Mode
7. Metering/Exposure/ISO Sensitivity Shutter-Priority AE Mode In [S] mode (Shutter-Priority AE mode), you can set the shutter speed before recording. The aperture value will be automatically set by the camera. Slower shutter speeds Faster shutter speeds It becomes easier to capture motion It becomes easier to freeze motion Set the mode dial to [S].
Page 192 7. Metering/Exposure/ISO Sensitivity Start recording. If the correct exposure is not achieved when the shutter button is pressed halfway, the aperture value and the shutter speed blink red. The effects of the set aperture value and shutter speed will not be visible on the recording screen.
Page 193: Manual Exposure Mode
7. Metering/Exposure/ISO Sensitivity Manual Exposure Mode In [M] mode (Manual Exposure mode), you can take pictures by manually setting the aperture value and shutter speed. In default settings, the ISO sensitivity is set to [AUTO]. As a result, the ISO sensitivity will be adjusted according to the aperture value and shutter speed.
Page 194 7. Metering/Exposure/ISO Sensitivity Available Shutter Speeds (Sec.) [MECH.] [B] (Bulb, max. approx. 30 minutes), 60 to 1/8000 [EFC] [B] (Bulb, max. approx. 30 minutes), 60 to 1/2000 [ELEC.] [B] (Bulb, max. approx. 60 seconds), 60 to 1/8000 The effects of the set aperture value and shutter speed will not be visible on the recording screen.
Page 195 7. Metering/Exposure/ISO Sensitivity [B] (Bulb) If you set the shutter speed to [B] (Bulb), the shutter stays open while the shutter button is pressed fully. (up to approx. 30 minutes) The shutter closes when the shutter button is released. Use this when you want to keep the shutter open for a long time to record images of fireworks, night scenery or a starry sky.
Page 196: Preview Mode
7. Metering/Exposure/ISO Sensitivity Preview Mode You can check the effects of aperture on the recording screen by physically closing the aperture blades of the lens to the aperture value set for actual recording. In addition to the effects of aperture, you can check the effects of shutter speed at the same time.
Page 197: Exposure Compensation
7. Metering/Exposure/ISO Sensitivity Exposure Compensation You can compensate the exposure when the correct exposure determined by the camera is too bright or too dark. You can adjust the exposure in 1/3 EV steps in a range of n5 EV. When recording videos or recording with 6K/4K photo or Post-Focus, the range changes to n3 EV.
Page 198 7. Metering/Exposure/ISO Sensitivity In [M] mode, you can compensate the exposure by setting the ISO sensitivity to [AUTO]. When [Auto Exposure Comp.] is set to [ON], the flash output will automatically be set to the level appropriate to the exposure compensation. When the exposure compensation value falls below or exceeds n3 EV, the brightness of the recording screen will no longer change.
Page 199: Locking Focus And Exposure (Af/Ae Lock)
7. Metering/Exposure/ISO Sensitivity Locking Focus and Exposure (AF/AE Lock) Lock the focus and exposure in advance to take pictures with the same focus and exposure settings while changing the composition. This is useful when you want to bring an edge of the screen into focus or there is a backlight, for example.
Page 200: Iso Sensitivity
7. Metering/Exposure/ISO Sensitivity ISO Sensitivity You can set light sensitivity (ISO sensitivity). With the default settings, you can set 100 to 51200 in 1/3 EV increments. This camera supports Dual Native ISO which enables recording at high sensitivity with reduced noise by switching the base sensitivity. The base sensitivity can also be fixed as necessary.
Page 201 7. Metering/Exposure/ISO Sensitivity Characteristics of the ISO Sensitivity By increasing the ISO sensitivity, the shutter speed can be increased in dark places to prevent camera shake and subject blur. However, higher ISO sensitivities also increase the amount of noise in the recorded images. Setting Items (ISO Sensitivity) The ISO sensitivity is automatically adjusted according to the brightness.
Page 202 7. Metering/Exposure/ISO Sensitivity You can set upper and lower limits for ISO Auto: – [ [ISO Sensitivity (photo)] (l 398) – [ [ISO Sensitivity (video)] (l 282) You can change the intervals between ISO sensitivity settings values: [ISO Increments] (l 418) The setting range of ISO sensitivity can be extended: [Extended ISO] (l 419) You can set the lower limit for shutter speed for ISO Auto:...
Page 203: [Dual Native Iso Setting]
7. Metering/Exposure/ISO Sensitivity [Dual Native ISO Setting] You can set whether to switch the base sensitivity automatically or to fix it. Select [Dual Native ISO Setting] The base sensitivity is automatically switched according to the brightness. [AUTO] ISO sensitivity [AUTO] / [100] to [51200]. that can be set When [Extended ISO] is set: [AUTO] / [50] to [204800].
Page 204: White Balance/Image Quality
White Balance/Image Quality White Balance (WB) White balance (WB) is a function that corrects the colour cast produced by the light illuminating the subject. It corrects the colours so that white objects appear in white to make the overall colour closer to what is seen by the eye. Normally, you can use auto ([AWB], [AWBc] or [AWBw]) to obtain the optimal white balance.
Page 205 8. White Balance/Image Quality Confirm your selection. ≥Press the shutter button halfway. Setting Items (White Balance) [AWB] Auto Auto (Reduces the reddish hue under an incandescent light [AWBc] source) Auto (Leaves the reddish hue under an incandescent light [AWBw] source) Clear sky [Ð] Cloudy sky...
Page 206 8. White Balance/Image Quality [AWB] will work within this range. Blue sky Cloudy sky (Rain) Shade Sunlight White fluorescent light Incandescent light bulb Sunrise and sunset Candlelight KlKelvin Colour Temperature Under lighting such as fluorescent or LED lighting, the appropriate white balance will vary depending on the lighting type.
Page 207 8. White Balance/Image Quality Registering the White Set ([ ] to [ Take pictures of a white object under the light source of the recording location to adjust the white balance until it appears white. Press [WB] and then select any value from [ ] to [ Press 3.
Page 208: Adjusting The White Balance
8. White Balance/Image Quality Adjusting the White Balance You can adjust the colouring even when the colouring you want to apply is not produced by the selected white balance. Press [WB]. Select the white balance and then press 4. ≥The adjustment screen is displayed. Adjust the colouring.
Page 209 8. White Balance/Image Quality Confirm your selection. ≥Press the shutter button halfway. When the white balance is adjusted, the colour of its recording screen icon changes to the adjusted colour. Adjusting toward the [G] side will display [i], while adjusting toward the [M] side will display [j].
Page 210: [Photo Style]
8. White Balance/Image Quality [Photo Style] You can select the finishing settings of images to suit your subjects and expression styles. The image quality can be adjusted for each Photo Style. Select [Photo Style] [Standard] The standard setting. A setting that produces a more vivid quality with [Vivid] higher saturation and contrast.
Page 211 8. White Balance/Image Quality A setting that minimises overexposure by applying a gamma curve correction equivalent to Rec.709 to perform compression (knee [Like709] adjustment) of high-luminance areas. Rec.709 is an abbreviation of “ITU-R Recommendation BT.709”, a standard for high- definition broadcasting. Gamma curve setting intended for post- production processing.
Page 212 8. White Balance/Image Quality In [iA] mode, operation differs from that in other recording modes. – [Standard] or [Monochrome] can be set. – The setting will be reset to [Standard] when the camera is switched to another recording mode or it is turned off. –...
Page 213 8. White Balance/Image Quality Adjusting Image Quality Press 21 to select the type of Photo Style. Press 34 to select an item and then press 21 to adjust. Adjusted items are indicated with [¢]. ±0 ±0 Press ±0 ±0 When the image quality is adjusted, the ±0 - 5 - 5 Photo Style icon on the recording screen is...
Page 214 8. White Balance/Image Quality [Low]/ [Standard]/ Sets the grain effect level. ¢4 [Grain Effect] [High] [Off] [Sharpness] Adjusts the outlines in the image. Adjusts the noise reduction effect. [Noise Increasing the effect may cause a slight drop in picture Reduction] resolution.
Page 215 8. White Balance/Image Quality Registering Settings in My Photo Style Press 21 to select the type of Photo Style. Adjust the image quality. My Photo Style displays the types of Photo Style at the top of image quality adjustment. Select the base Photo Style. Press [DISP.].
Page 216: [Filter Settings]
8. White Balance/Image Quality [Filter Settings] This mode records with additional image effects (filters). You can adjust the effect for each filter. In addition, you can simultaneously take pictures without effects. Set the [Filter Effect]. [Filter ≥ Settings] [Filter Effect] [SET] Select the filter.
Page 217 8. White Balance/Image Quality Filter Items that can be adjusted [Expressive] Vividness [Retro] Colouring [Old Days] Contrast [High Key] Colouring [Low Key] Colouring [Sepia] Contrast [Monochrome] Colouring [Dynamic Monochrome] Contrast [Rough Monochrome] Grittiness [Silky Monochrome] Defocus level [Impressive Art] Vividness [High Dynamic] Vividness [Cross Process]...
Page 218 8. White Balance/Image Quality Setting a Filter with Touch Operation The default settings are for the Touch Tab to not be displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. (l 425) Touch [ EXPS EXPS EXPS Touch the item to set.
Page 219 8. White Balance/Image Quality Filter on/off operations can be registered to a Fn button: [Fn Button Set] [Setting in REC mode] [Filter Effect] (l 367) When displaying the [Filter Effect] setting screen using the Fn button, pressing [DISP.] displays the filter selection screen. Setting the Type of Defocus ([Miniature Effect]) Set [Filter Effect] to [Miniature Effect].
Page 220 8. White Balance/Image Quality Setting the Colour to Be Left ([One Point Color]) Set [Filter Effect] to [One Point Color]. Press 3 to display the setting screen. The setting screen can also be displayed by touching [ ] then [ Press 3421 to move the frame and select the colour you want to leave.
Page 221: [Simultaneous Record W/O Filter]
8. White Balance/Image Quality [Simultaneous Record w/o Filter] You can simultaneously take pictures with no added filter effects. [Filter Settings] Select [Simultaneous Record w/ o Filter] Settings: [ON]/[OFF] [Simultaneous Record w/o Filter] is not available when using the following functions: –...
Page 222: [High Resolution Mode]
8. White Balance/Image Quality [High Resolution Mode] This merges pictures with a high resolution from multiple recorded images. This function is suitable for recording subjects that do not move. Merged pictures will be saved as RAW files with a maximum image size of 96 M.
Page 223 8. White Balance/Image Quality Decide on the composition and then fix the camera in place. If blurring is detected, the High Resolution mode icon A blinks. Start recording. ≥Press the shutter button fully. With the default settings, [Shutter Delay] is activated, so there will be a gap in time from when the shutter button is pressed until the shutter is released.
Page 224 8. White Balance/Image Quality Setting Items ([High Resolution Mode]) [Start] Starts High Resolution mode. [Simul Record Simultaneously takes pictures that are not merged when [ON] is Normal Shot] set. The first picture will be saved with [Picture Size] set to [L]. Sets the delay time from when the shutter button is pressed until [Shutter Delay] the shutter is released.
Page 225 8. White Balance/Image Quality In [High Resolution Mode], recording will be performed using the following settings: – [Shutter Type]: Fixed to [ELEC.] – Minimum aperture value: F16 – Shutter speed: 1 second to 1/8000 of a second – ISO sensitivity: Up to [3200] –...
Page 226: [Hlg Photo]
8. White Balance/Image Quality [HLG Photo] Records an HLG format picture with a wide dynamic range. Bright lights that are easily overexposed, and dark areas that are easily underexposed can be recorded showing fine quality and rich colours just as seen with the human eyes.
Page 227 8. White Balance/Image Quality The monitor and viewfinder on this camera do not support display of HLG format images. In the [Custom] ([Monitor / Display (Video)]) menu, you can display the images converted for monitoring on the monitor/viewfinder of this camera with [Monitor] in [HLG View Assist].
Page 228: Flash
Flash Using an External Flash (Optional) If you attach the Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) to the hot shoe, you can record using the flash. You can also use a commercially available external flash by connecting a synchro cable to the flash synchro socket. Furthermore, by attaching an external flash that supports wireless flash recording, you can wirelessly control an external flash that is in a position separate from the camera.
Page 229 9. Flash Connecting a Synchro Cable to the Flash Synchro Socket You can use a commercially available external flash by connecting a synchro cable to the flash synchro socket. Use an external flash with a synchronisation voltage of 250 V or less. Do not use the synchro cables with the length of 3 m (9.8 feet) or more.
Page 230 9. Flash Notes on Flash Recording Do not bring any object near the flash. Heat or light may cause the object to deform or discolour. If you record repeatedly, time may be needed to charge the flash. While the flash is charging, images will be recorded without the flash firing. When an external flash is attached, do not carry the camera by holding only the external flash.
Page 231: Setting Flash
9. Flash Setting Flash You can set the flash function to control flash firing from the camera. [Flash Mode] Sets the flash mode. Select [Flash Mode] (Forced Flash The flash fires every time regardless of the recording [‰] conditions. This is suitable for recording when there is backlighting (Forced On/Red- or under lighting such as fluorescent lighting.
Page 232 9. Flash The flash fires twice. The interval between the first and second firings is longer when [ ] or ] is set. The subject should not move until the second firing has finished. ] and [ ] cannot be used when the following are set: –...
Page 233: [Red-Eye Removal]
9. Flash Shutter Speeds for Flash Modes [Flash Mode] Shutter speed (sec.) [‰] 1/60 ¢1 to 1/320 ¢2 1 to 1/250 ¢1 In [S] mode, this will be 60 seconds and in [M] mode it will be [B] (Bulb). ¢2 The maximum setting changes to 1/250 of a second in [P]/[A] modes. The guide number decreases when the shutter speed is set to 1/320 of a second.
Page 234: [Firing Mode]/[Manual Flash Adjust.]
Firing mode cannot be set when using a Flash (DMW-FL580L/DMW-FL360L/ DMW-FL200L: optional). It can be set only when using an external flash that does not use a battery (supplied with some models of Panasonic digital cameras). Set the [Firing Mode].
Page 235: [Flash Adjust.]
9. Flash Press 21 to set the flash output and then press It can be set within the range of [1/1] (full flash output) to [1/64] in 1/3 steps. [Flash Adjust.] You can adjust the flash output when taking pictures with the flash in TTL output mode.
Page 236: [Flash Synchro]
9. Flash ] is displayed on the recording screen. For information about adjusting the flash output when recording using a wireless flash, refer to page 240. [Flash Adjust.] cannot be used when the following are set: – [Firing Mode]: [MANUAL] –...
Page 237: [Auto Exposure Comp.]
9. Flash This is the normal method for recording with the Flash. [1ST] The light source appears behind the subject and the picture becomes [2ND] dynamic. When [2ND] is set, [2nd] is displayed on the flash icon of the recording screen. When [Wireless] is set to [ON], this is fixed to [1ST].
Page 238: Recording Using A Wireless Flash
9. Flash Recording Using a Wireless Flash You can use a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) to record using a wireless flash. You can separately control the firing of three flash groups and the flash attached to the hot shoe of the camera. Placing a Wireless Flash Place the wireless flash with its wireless sensor facing the camera.
Page 239 9. Flash Attach an external flash to the camera. (l 228) Set the wireless flashes to [RC] mode and then place them. Set the channel and group for the wireless flashes. Enable the wireless flash function of the camera. [Wireless] ≥...
Page 240 9. Flash Setting Items ([Wireless Setup]) To fire a test flash, press [DISP.]. [TTL]: The camera automatically sets the flash output. [AUTO] ¢2 : Sets the flash output on the external flash side. [Firing [MANUAL]: Sets the flash output of the external flash Mode] manually.
Page 241 9. Flash You can register functions to Fn buttons: [Fn Button Set] [Setting in REC mode] [Wireless Flash Setup] (l 367) [Wireless FP] The external flash performs FP firing (repeated high-speed firing of the flash) during wireless recording, enabling recording using the Flash even at fast shutter speeds.
Page 242: Recording Videos
Recording Videos Recording Videos It is possible to record video with a maximum resolution of 6K (5952 3968) on this camera. It also supports switching of the system frequency and 3 types of recording file format; AVCHD, MP4, and MOV. In the [ ] mode (Creative Video mode), which is specifically for video recording, you can use all of the video functions.
Page 243 10. Recording Videos Screen Displays While Video Recording The live view angle of view changes to the angle of view for video recording, and video recording time E and elapsed recording time F are displayed. “h” is an abbreviation for hour, “m” for minute ...
Page 244 10. Recording Videos Size Interval for Dividing Files [Rec. File Format] [Rec Quality] Size interval for dividing files A new file will be created to continue recording if the file size exceeds 4 GB. [AVCHD] The files recorded can be played back continuously.
Page 245 10. Recording Videos When the remaining capacity of the battery or card gets low during video recording, the tally lamps blink at long intervals. When there is no remaining capacity in the battery or card, video recording is stopped and the tally lamps blink at short intervals.
Page 246 10. Recording Videos You can switch the recording screen, status LCD display, and live view angle of view to suit video recording just as with the [ ] mode: [Video-Priority Display] (l 441) You can change the tally lamp that turns on. You can change the settings so the tally lamps do not turn on: [Tally Lamp] (l 442) You can display a red frame on the recording screen that indicates that video...
Page 247: Creative Video Mode
10. Recording Videos Creative Video Mode The [ ] mode (Creative Video mode) is a recording mode specifically for video recording in which you can use all video functions. In the [ ] mode, the recording screen and status LCD switch to displays suited to video recording.
Page 248 10. Recording Videos Status LCD You can switch the status LCD between 2 types of information display. Use the Fn button registered with [Status-LCD Display(Video)] to operate. In default settings, this is registered in the [Fn1] button. For information about the Fn button, refer to page 367.
Page 249: Recording With Creative Video
10. Recording Videos Even in the [iA]/[P]/[A]/[S]/[M] modes, as with the [ ] mode, you can switch to the display suited to video recording: [Video-Priority Display] (l 441) Recording with Creative Video Set the mode dial to [ Set the exposure mode. [Exposure ≥...
Page 250 10. Recording Videos Start recording. ≥Press the shutter button A, video rec. button B, or sub video rec. button C.   Stop recording. ≥Press the shutter button, video rec. button, or sub video rec. button again.  You can register functions to Fn buttons: [Fn Button Set] [Setting in REC mode] [Exposure...
Page 251 10. Recording Videos Operations During Video Recording Change the exposure and audio settings with touch operation to prevent operation sounds from being recorded. With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu.
Page 252: [Creativevideo Combined Set.]
10. Recording Videos [CreativeVideo Combined Set.] In default settings, settings such as exposure and white balance changed in [ ] mode are also reflected in picture recording in [P]/[A]/[S]/[M] modes. From the [CreativeVideo Combined Set.] menu, you can separate settings for video recording and for picture recording.
Page 253: Recording Video
10. Recording Videos Recording Video This section describes the settings used when video recording. In “4. Image Recording”, the functions described work with both pictures and video. Please also refer to that section. – [Double Card Slot Function]: l – [Folder / File Settings]: l –...
Page 254 10. Recording Videos After changing the setting, turn the camera off and on. If you record using a system frequency that differs from the broadcasting system of your region, it may not be possible for you to properly play back videos on your TV.
Page 255: [Rec. File Format]
10. Recording Videos [Rec. File Format] Sets the recording file format of videos to be recorded. Select [Rec. File Format] [AVCHD] This file format is suitable for playback on high-definition TVs. [MP4] This file format is suitable for playback on PCs. [MOV] This file format is suitable for image editing.
Page 256 10. Recording Videos [Rec. File Format]: [AVCHD] YUV, Bit value, Image compression: 4:2:0, 8-bit, Long GOP Audio format: Dolby Audio (2ch) A Recording frame rate B Bit rate C Video compression format (AVC: H.264/MPEG-4 AVC) [System Frequency]: [59.94Hz (NTSC)] [Image Area of Aspect Video] [Rec Quality]...
Page 257 10. Recording Videos [Rec. File Format]: [MP4] YUV, Bit value, Image compression: – [10bit] recording quality: 4:2:0, 10-bit, Long GOP – [8bit] recording quality: 4:2:0, 8-bit, Long GOP Audio format: AAC (2ch) A Recording frame rate B Bit rate C Video compression format (HEVC: H.265/HEVC, AVC: H.264/MPEG-4 AVC) [System Frequency]: [59.94Hz (NTSC)] [Image Area of Aspect...
Page 258 10. Recording Videos [Rec. File Format]: [MOV] YUV, Bit value, Image compression: – [422/10-I] recording quality: 4:2:2, 10-bit, ALL-Intra – [422/10-L] recording quality: 4:2:2, 10-bit, Long GOP – [420/10-L] recording quality: 4:2:0, 10-bit, Long GOP – [420/8-L] recording quality: 4:2:0, 8-bit, Long GOP Audio format: LPCM (2ch) A Recording frame rate B Bit rate...
Page 259 10. Recording Videos [System Frequency]: [59.94Hz (NTSC)] [Image Area of Aspect Video] [Rec Quality] Resolution ratio (Mbps) FULL S35 P/P [C4K/30p/422/10-L] 4096k2160 17:9 29.97p [C4K/30p/420/8-L] 4096k2160 17:9 29.97p [C4K/24p/422/10-I] 4096k2160 17:9 23.98p [C4K/24p/422/10-L] 4096k2160 17:9 23.98p [C4K/24p/420/8-L] 4096k2160 17:9 23.98p [4K/60p/420/10-L] 3840k2160 16:9...
Page 260 10. Recording Videos A Recording frame rate B Bit rate C Video compression format (HEVC: H.265/HEVC, AVC: H.264/MPEG-4 AVC) [System Frequency]: [50.00Hz (PAL)] [Image Area of Aspect Video] [Rec Quality] Resolution ratio (Mbps) FULL S35 P/P [5.9K/25p/420/10-L] 5888k3312 16:9 25.00p HEVC [5.4K/25p/420/10-L] 5376k3584...
Page 261 10. Recording Videos [System Frequency]: [50.00Hz (PAL)] [Image Area of Aspect Video] [Rec Quality] Resolution ratio (Mbps) FULL S35 P/P [FHD/100p/420/10-L] 1920k1080 16:9 100.00p HEVC [FHD/50p/422/10-I] 1920k1080 16:9 50.00p [FHD/50p/422/10-L] 1920k1080 16:9 50.00p [FHD/50p/420/8-L] 1920k1080 16:9 50.00p [FHD/50i/422/10-I] 1920k1080 16:9 50.00i [FHD/50i/422/10-L] 1920k1080...
Page 262 10. Recording Videos [System Frequency]: [24.00Hz (CINEMA)] [Image Area of Aspect Video] [Rec Quality] Resolution ratio (Mbps) FULL S35 P/P [C4K/48p/420/10-L] 4096k2160 17:9 48.00p HEVC [C4K/24p/422/10-I] 4096k2160 17:9 24.00p [C4K/24p/422/10-L] 4096k2160 17:9 24.00p [C4K/24p/420/8-L] 4096k2160 17:9 24.00p [4K/48p/420/10-L] 3840k2160 16:9 48.00p HEVC [4K/24p/422/10-I]...
Page 263 10. Recording Videos Since the camera employs the VBR recording format, the bit rate is changed automatically depending on the subject to record. As a result, video recording time is shortened when a fast-moving subject is recorded. Videos in ALL-Intra and 4:2:2 10-bit formats are intended for editing on a PC used for video production.
Page 264 10. Recording Videos [Filtering] When the [Rec. File Format] is set to [MOV], you can specify items such as frame rate, resolution, and codec (YUV, Bit value, Image compression), and just display recording quality that meets those conditions. In the [Rec Quality] setting screen, press [DISP.].
Page 265 10. Recording Videos [add to list] Select a recording quality and register it in My List. The recording quality you register can be set in [Rec Quality (My List)]. In the [Rec Quality] setting screen, press [Q]. The following settings are also registered at the same time: –...
Page 266: [Image Area Of Video]
10. Recording Videos [Image Area of Video] Set the image area during video recording. The angle of view differs depending on the image area. Narrowing the image area allows you to achieve a telescopic effect without image deterioration. Select [Image Area of Video] Angle of Telescopic Item...
Page 267 10. Recording Videos Image area (Ex.: FHD video) FULL S35mm PIXEL/PIXEL To check the image area in recording modes other than [ ] mode, set [Video- Priority Display] in the [Custom] ([Monitor / Display (Video)]) menu to [ON]. (l 441)
Page 268: Time Code
10. Recording Videos Time Code When [Rec. File Format] is set to [AVCHD] or [MOV], the time code is automatically recorded during video recording. If [MP4], the time code is not recorded. Setting the Time Code Sets the recording, display, and output of the time code. Set [Rec.
Page 269 10. Recording Videos Sets to 00:00:00:00 (hour: minute: second: [Reset] frame) [Time Code [Manual Input] Manually input hour, minute, second and frame. Value] Sets hour, minute and second to current time [Current Time] and sets frame to 00. Drop Frame. The camera modifies the difference between recorded time and time [DF] code.
Page 270: Synchronising The Time Code With An External Device
10. Recording Videos Synchronising the Time Code with an External Device Synchronise the time code default value with an external device that supports time code signal input and output. A Flash synchro socket B BNC conversion cable (for TC IN/OUT) (supplied) C BNC cable (commercially available) D External devices Preparations for Time Code Synchronisation...
Page 271: Synchronise The Time Code Of The External Device With That Of The Camera (Tc Out)
10. Recording Videos Insert the BNC conversion cable (for TC IN/OUT), and then rotate the locking screw in the direction of the arrow to attach the cable. Connect the BNC conversion cable (for TC IN/OUT) and the external device with the BNC cable. Do not use any other BNC conversion cables (for TC IN/OUT) except the supplied one.
Page 272 10. Recording Videos Set [TC Synchronization] to [TC OUT]. [Time Code] [External TC Setting] ≥ Synchronization] [TC OUT] ≥The time code signal is output according to the recording frame rate of the [Rec Quality] and the [Time Code Mode] ([DF]/[NDF]) setting.
Page 273: Synchronise The Time Code Of The Camera With That Of The External Device (Tc In)
10. Recording Videos Synchronise the Time Code of the Camera with That of the External Device (TC IN) The initial time code value of the camera is synchronised according to the time code signal (LTC signal) of the external device. In advance, change the [System Frequency] (l 253), [Rec Quality] (l 255), and [Time Code Mode] (l 269) to match the external device.
Page 274 10. Recording Videos Maintaining, Releasing, and Restoring the Slave State Even if you disconnect the BNC cable, the camera will remain in slave state. Perform one of the following operations to release the camera from the slave state. – Operate the camera on/off switch –...
Page 275: Using Af (Video)
10. Recording Videos Using AF (Video) This section describes the use of AF when video recording. In “5. Focus/Zoom”, the functions described work with both pictures and video. – Selecting the Focus Mode: l – Selecting the AF Mode: l –...
Page 276 10. Recording Videos In the [iA] mode, the camera automatically keeps focusing during recording standby, irrespective of the [Continuous AF] setting. Depending on the recording conditions or lens used, the AF operation sound may be recorded during video recording. If the operation sound bothers you, we recommend recording with [Continuous AF] set to [OFF].
Page 277: [Af Custom Setting(Video)]
10. Recording Videos [AF Custom Setting(Video)] You can fine-adjust the focusing method for video recording using [Continuous AF]. Select [AF Custom Setting(Video)] [ON] Enables the following settings. [OFF] Disables the following settings. [r] side: Focus moves at a faster speed. [AF Speed] [s] side: Focus moves at a slower speed.
Page 278: Video Brightness And Colouring
10. Recording Videos Video Brightness and Colouring This section describes the brightness and colouring settings used during video recording. In “7. Metering/Exposure/ISO Sensitivity” and “8. White Balance/Image Quality”, the functions described work with both pictures and video. Please also refer to those sections. –...
Page 279: [Master Pedestal Level]
10. Recording Videos [Master Pedestal Level] You can adjust the black level, which serves as the reference for images. Set the mode dial to [ Select [Master Pedestal Level]. ≥ [Master Pedestal Level] Adjust master pedestal. +4 +4 - 15 - 15 - 10 - 10...
Page 280: Recording While Controlling Overexposure (Knee)
10. Recording Videos Recording While Controlling Overexposure (Knee) When [Photo Style] is set to [Like709], you can adjust the knee so that recording can be performed with minimal overexposure. Set [Photo Style] to [Like709]. [Photo ≥ Style] [Like709] ±0 ±0 Press [Q].
Page 281 10. Recording Videos Select a knee setting. ≥Press 21 to select a setting item. Adjusts the compression levels of high-luminance areas [AUTO] automatically. Allows you to adjust the master knee point and master knee slope manually. Press 34 to select an item and then press 21 to adjust.
Page 282: [Iso Sensitivity (Video)]
10. Recording Videos [ISO Sensitivity (video)] Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO]. Set the mode dial to [ Set [ISO Sensitivity (video)]. ≥ [ISO Sensitivity (video)] Setting Items ([ISO Sensitivity (video)]) Sets the lower limit for ISO sensitivity when ISO [ISO Auto Lower Limit sensitivity is [AUTO].
Page 283: Audio Settings
10. Recording Videos Audio Settings [Sound Rec Level Disp.] The sound recording level is displayed on the recording screen. Select [Sound Rec Level Disp.] Settings: [ON]/[OFF] When [Sound Rec Level Limiter] is set to [OFF], [Sound Rec Level Disp.] is fixed to [ON].
Page 284: [Sound Rec Gain Level]
10. Recording Videos [Sound Rec Gain Level] This switches the gain of audio input. Select [Sound Rec Gain Level] [STANDARD] This is the standard input gain setting. (0 dB) Audio input is reduced for recording in environments with loud [LOW] noises.
Page 285: [Sound Rec Level Limiter]
10. Recording Videos [Sound Rec Level Limiter] The sound recording level is adjusted automatically to minimise sound distortion (crackling noise). Select [Sound Rec Level Limiter] Settings: [ON]/[OFF] You can register functions to Fn buttons: [Fn Button Set] [Setting in REC mode] [Sound Rec Level Limiter] (l 367) [Wind Noise Canceller]...
Page 286: Main Assist Functions
10. Recording Videos Main Assist Functions This section describes the main assist functions that are convenient when recording. The [Custom] ([Monitor / Display (Video)]) menu has display assist functions such as the centre marker. For details, refer to page 439. [SS/Gain Operation] You can switch the units of shutter speed values and gain (sensitivity) values.
Page 287 10. Recording Videos When [SS/Gain Operation] is set to [SEC/dB], menu names change as shown below: – [Dual Native ISO Setting] [Dual Native Gain Setting] – [ISO Sensitivity (video)] [Gain Setting] – [ISO Auto Lower Limit Setting] [Auto Gain Lower Limit Setting] –...
Page 288: [Wfm/Vector Scope]
10. Recording Videos [WFM/Vector Scope] This displays the waveform monitor or the vector scope on the recording screen. You can change the size of the waveform display. Set the mode dial to [ Set [WFM/Vector Scope]. ≥ [WFM/Vector Scope] [WAVE] Displays a waveform.
Page 289 10. Recording Videos Select the position to display. ≥Press 3421 to select and then press Positions can be moved to the diagonal directions using the joystick. You can also move using touch operations. You can rotate to change the size of the waveform. To return the waveform or vector scope position back to the centre, press [DISP.].
Page 290 10. Recording Videos Screen Displays Waveform A The range between 0 and 100 shows dotted lines at intervals of 10. B %, IRE (Institute of Radio Engineers) C 109 (dotted line) D 100 E 50 G s4 (dotted line) H Display example The waveform displayed on the camera indicates the luminance as values based on the conversions below: 0% (IRE): Luminance value 16 (8-bit)
Page 291 10. Recording Videos Vector scope I R (Red) J YL (Yellow) K G (Green) L MG (Magenta) M B (Blue) N CY (Cyan) O Display example You can also change the position by dragging on the recording screen. The waveform and vector scope are not output through HDMI. When [WFM/Vector Scope] is set, [Histogram] does not work.
Page 292: [Luminance Spot Meter]
10. Recording Videos [Luminance Spot Meter] Specify any spot on the subject to measure the luminance over a small area. Set [Luminance Spot Meter]. [Luminance ≥ Spot Meter] [ON] Select the position where you want to measure the luminance. ≥Press 3421 to select and then press A Luminance value Positions can be moved to the diagonal...
Page 293: [Zebra Pattern]
10. Recording Videos [Zebra Pattern] Parts that are brighter than the benchmark value are displayed with stripes. You can also set the benchmark value and the breadth of the range so that the stripes are displayed on parts that are within the range of brightness you specify.
Page 294 10. Recording Videos When [BASE/RANGE] Was Selected with [SET] Centred on the brightness set with [Base Level], parts with the brightness in the range set in [Range] are displayed with the stripes. ≥[Base Level] can be set in the range between 0% and 109% (IRE). ≥[Range] can be set in the range between n1% and n10% (IRE).
Page 295: [Video Frame Marker]
10. Recording Videos [Video Frame Marker] A frame with the set aspect ratio is displayed on the recording screen. This allows you to see during recording the angle of view that will be achieved with trimming (cropping) in post-processing. Select [Video Frame Marker] [ON] Displays video grid lines on the recording screen.
Page 296: Colour Bars/Test Tone
10. Recording Videos Colour bars/Test Tone The colour bars are displayed on the recording screen. A test tone is output while the colour bars are being displayed. [SMPTE] [EBU] [ARIB] Select [Color Bars] Settings: [SMPTE]/[EBU]/[ARIB] To end the display, press Adjusting the Test Tone There are 4 levels ([j12dB], 18dB], [j20dB], and [MUTE]) of test tone...
Page 297: Special Video Recording
Special Video Recording Variable Frame Rate By recording using a frame rate that is different to the playback frame rate, you can record smooth slow motion video and fast motion video. Set a number of frames that is higher than the Slow Motion Video recording frame rate of the [Rec Quality].
Page 298 11. Special Video Recording Select a recording quality with which you can use [Variable Frame Rate] recording. [Rec ≥ Quality] Items with which you can use [Variable Frame Rate] are indicated as [VFR available]. Recording qualities with which you can use [Variable Frame Rate] recording: Select an [Image Area of Video] with which you can use [Variable Frame Rate].
Page 299 11. Special Video Recording Available Frame Rate Setting Ranges The frame rate you can set differs depending on the [Rec. File Format] and [Rec Quality] settings. [Rec. File Format] [Rec Quality] Frame rate [AVCHD] FHD video 2 fps to 60 fps Anamorphic (4:3) video 2 fps to 50 fps ¢1...
Page 300: High Frame Rate Video
11. Special Video Recording High Frame Rate Video [MOV] video with high frame rates can be recorded to cards. By converting it with the compatible software, it is possible to produce slow motion video. AF recording and audio recording, not possible with [Variable Frame Rate], also become possible.
Page 301: [Focus Transition]
11. Special Video Recording [Focus Transition] Smoothly transitions the focus position from the current position to a position registered in advance. Set the mode dial to [ Select [Focus Transition]. [Focus ≥ Transition] Set the recording settings. [Start] Start recording. Registers the focus position.
Page 302 11. Special Video Recording Close the menu. ≥Selects [Start], and press ≥The recording screen is displayed. To return to the setting screen, press [DISP.]. Start recording. ≥Press the video rec. button. If you have enabled [Focus Transition Rec], Focus Transition will start when you start recording a video.
Page 303 11. Special Video Recording Maintain the same distance to the subject after setting the focus position. The moving speed of focus varies depending on the lens being used. While using [Focus Transition], it is not possible to focus on anything other than the registered focus position.
Page 304: [Live Cropping]
11. Special Video Recording [Live Cropping] By cropping a part of the image from the image displayed in the live view, it is possible to record FHD video that incorporates panning and zooming with the camera staying in a fixed position. Zoom in Use a tripod to minimise camera shake.
Page 305 11. Special Video Recording Select a recording quality with which you can record [Live Cropping] video. [Rec ≥ Quality] A recording quality with which you can record [Live Cropping] video: l Set the time for panning or zooming. [Live ≥ Cropping] [40SEC]/[20SEC] If you have selected a recording format or...
Page 306 11. Special Video Recording Start Live Cropping recording. C Elapsed recording time D Set operating time ≥Press the video rec. button. When the set operating time has elapsed, recording automatically ends. To end recording midway, press the video rec. button again.
Page 307 11. Special Video Recording Operations for Setting the Cropping Frame Button Touch Description of operation operation operation Moves the frame. Touch Positions can be moved to the diagonal 3421 directions using the joystick. Pinch out/ Enlarges/reduces the frame in small steps. pinch in Enlarges/reduces the frame.
Page 308: Log Recording
Select [V-Log] Post-production processing is enabled by utilising LUT (Look-Up Table). You can download LUT data from the following support site: https://panasonic.jp/support/global/cs/dsc/download/index3.html (English only) ISO Sensitivity When [V-Log] Is Set The lower limit of available ISO sensitivity is [640] (when [Extended ISO] is set: [320]), and the upper limit is [51200].
Page 309 11. Special Video Recording Exposure When [V-Log] Is Set The [V-Log] curve characteristics comply with “V-Log/V-Gamut REFERENCE MANUAL Rev.1.0”. When set to [V-Log], the standard exposure when grey with a reflectance ratio of 18% is imaged is IRE 42%. （10 bit code value）（10 bit code value）...
Page 310: [V-Log View Assist]
11. Special Video Recording [V-Log View Assist] When [Photo Style] is set to [V-Log], the recording screen and images output via HDMI will darken. Using [V-Log View Assist] means you can show images with LUT data applied on the monitor/viewfinder and output them via HDMI.
Page 311 11. Special Video Recording Reading LUT Files The following LUT data can be used: – The “.vlt” format, which meets the requirements specified in the “VARICAM 3DLUT REFERENCE MANUAL Rev.1.0” – File names consisting of up to 8 alphanumeric characters (excluding extension) Save the LUT data with a file extension of “.vlt”...
Page 312: Hlg Videos
11. Special Video Recording HLG Videos Record videos with the wide dynamic range of the HLG format. You can record in very bright light where overexposure can occur or in dark areas where underexposure can occur, maintaining the rich yet subtle colours you can see with your naked eye.
Page 313 11. Special Video Recording Select a recording quality with which you can record HLG video. [Rec ≥ Quality] Items available for recording with HLG video are indicated as [HLG available]. Recording qualities with which you can record HLG video: l Set [Photo Style] to [Like2100(HLG)].
Page 314: [Hlg View Assist]
11. Special Video Recording ISO Sensitivity When [Like2100(HLG)] Is Set The lower limit of available ISO sensitivities will become [400]. The range of available ISO sensitivities is also different for [LOW] and [HIGH] in [Dual Native ISO Setting]. Reset the exposure if necessary when ISO sensitivity changes. [HLG View Assist] At recording or playback of [HLG Photo] and HLG video, this displays images with converted colour gamut and brightness on the camera...
Page 315: Anamorphic Recording
11. Special Video Recording Anamorphic Recording This camera can record video with a resolution of 4K-A (anamorphic (4:3) video) that is compatible with anamorphic recording with an aspect ratio of 4:3. It can also record video with an aspect ratio of 3:2 that has 6K resolution or 5.4K resolution.
Page 316: [Anamorphic Desqueeze Display]
11. Special Video Recording When [Rec. File Format] is set to [MOV], by filtering [Rec Quality] by the number of pixels, you can display just those recording qualities with resolutions and aspect ratios that meet the conditions. For details, refer to page 264. Anamorphic (4:3) video is displayed as [ANAMOR] in the [Rec Quality] setting screen.
Page 317 11. Special Video Recording Set [Anamorphic Desqueeze Display]. ≥ [Anamorphic Desqueeze Display] Settings: [ ]([2.0k])/ ]([1.8k])/ ]([1.5k])/ ]([1.33k])/ ]([1.30k])/[OFF] Make settings to suit the magnification of the anamorphic lens you are using. Set [Video Frame Marker]. [Video ≥ Frame Marker] For details, refer to page 295.
Page 318: [Synchro Scan]
11. Special Video Recording [Synchro Scan] Fine-adjust the shutter speed to reduce flickering and horizontal stripes. The shutter speed set in Synchro Scan is saved separately from the shutter speed used for normal recording. In the Synchro Scan setting screen you can call up the current shutter speed for normal recording and adjust it.
Page 319 11. Special Video Recording Set the shutter speed. to select a ≥Rotate numeric value, then press 60.1 60.1 You can call up the current shutter speed for normal recording by pressing [DISP.]. Adjust the shutter speed while looking at the screen so that flickering and horizontal stripes will be minimised.
Page 320: [Loop Recording (Video)]
11. Special Video Recording [Loop Recording (video)] Even when recording uses up the card’s free space, the camera continues the recording by deleting the oldest segment of the recorded data. Set the mode dial to [ Set [Rec. File Format] to [MOV].
Page 321 11. Special Video Recording Make sure the camera does not turn off during recording. Loop recording cannot start if there is insufficient available capacity on the card. When the recording time exceeds 12 hours, recording continues with data being deleted in order from the point where recording started. When the following functions are being used, [Loop Recording (video)] is not available: –...
Page 322: [Segmented File Recording]
11. Special Video Recording [Segmented File Recording] To avoid video loss due to unforeseen interruptions to the power supply, recorded video is divided every minute while MOV video is being recorded. The divided videos are saved as one group image. Set [Rec.
Page 323: List Of Recording Qualities That Enable Special Videos To Be Recorded
11. Special Video Recording List of Recording Qualities That Enable Special Videos to be Recorded : Recording qualities that enable use of [Variable Frame Rate] : Recording qualities for High Frame Rate video : Recording qualities that enable use of [Live Cropping] Live Crop : Recording qualities with which you can record HLG video : Recording qualities for anamorphic recording with an aspect ratio of 4:3...
Page 324 11. Special Video Recording [Rec. File Format]: [MP4] [System [Rec Quality] Live Crop Frequency] [4K/10bit/100M/60p] [4K/8bit/100M/30p] [4K/10bit/72M/30p] [4K/8bit/100M/24p] [59.94Hz (NTSC)] [4K/10bit/72M/24p] [FHD/8bit/28M/60p] [FHD/8bit/24M/24p] [FHD/8bit/20M/30p] [4K/10bit/100M/50p] [4K/8bit/100M/25p] [50.00Hz (PAL)] [4K/10bit/72M/25p] [FHD/8bit/28M/50p] [FHD/8bit/20M/25p]...
Page 325 11. Special Video Recording [Rec. File Format]: [MOV] [System [Rec Quality] Live Crop Frequency] [6K/24p/420/10-L] [5.9K/30p/420/10-L] [5.9K/24p/420/10-L] [5.4K/30p/420/10-L] [4K-A/48p/420/10-L] [4K-A/30p/422/10-I] [4K-A/30p/422/10-L] [4K-A/30p/420/8-L] [4K-A/24p/422/10-I] [4K-A/24p/422/10-L] [59.94Hz (NTSC)] [4K-A/24p/420/8-L] [C4K/60p/420/10-L] [C4K/60p/420/8-L] [C4K/48p/420/10-L] [C4K/30p/422/10-I] [C4K/30p/422/10-L] [C4K/30p/420/8-L] [C4K/24p/422/10-I] [C4K/24p/422/10-L] [C4K/24p/420/8-L]...
Page 326 11. Special Video Recording [System [Rec Quality] Live Crop Frequency] [4K/60p/420/10-L] [4K/60p/420/8-L] [4K/48p/420/10-L] [4K/30p/422/10-I] [4K/30p/422/10-L] [4K/30p/420/8-L] [4K/24p/422/10-I] [4K/24p/422/10-L] [4K/24p/420/8-L] [FHD/120p/420/10-L] [FHD/60p/422/10-I] [59.94Hz (NTSC)] [FHD/60p/422/10-L] [FHD/60p/420/8-L] [FHD/60i/422/10-I] [FHD/60i/422/10-L] [FHD/48p/420/10-L] [FHD/30p/422/10-I] [FHD/30p/422/10-L] [FHD/30p/420/8-L] [FHD/24p/422/10-I] [FHD/24p/422/10-L] [FHD/24p/420/8-L]...
Page 327 11. Special Video Recording [System [Rec Quality] Live Crop Frequency] [5.9K/25p/420/10-L] [5.4K/25p/420/10-L] [4K-A/50p/420/10-L] [4K-A/50p/420/8-L] [4K-A/25p/422/10-I] [4K-A/25p/422/10-L] [4K-A/25p/420/8-L] [C4K/50p/420/10-L] [C4K/50p/420/8-L] [C4K/25p/422/10-I] [C4K/25p/422/10-L] [C4K/25p/420/8-L] [4K/50p/420/10-L] [50.00Hz (PAL)] [4K/50p/420/8-L] [4K/25p/422/10-I] [4K/25p/422/10-L] [4K/25p/420/8-L] [FHD/100p/420/10-L] [FHD/50p/422/10-I] [FHD/50p/422/10-L] [FHD/50p/420/8-L] [FHD/50i/422/10-I] [FHD/50i/422/10-L] [FHD/25p/422/10-I] [FHD/25p/422/10-L] [FHD/25p/420/8-L]...
Page 328 11. Special Video Recording [System [Rec Quality] Live Crop Frequency] [6K/24p/420/10-L] [5.9K/24p/420/10-L] [4K-A/48p/420/10-L] [4K-A/24p/422/10-I] [4K-A/24p/422/10-L] [4K-A/24p/420/8-L] [C4K/48p/420/10-L] [C4K/24p/422/10-I] [C4K/24p/422/10-L] [24.00Hz (CINEMA)] [C4K/24p/420/8-L] [4K/48p/420/10-L] [4K/24p/422/10-I] [4K/24p/422/10-L] [4K/24p/420/8-L] [FHD/48p/420/10-L] [FHD/24p/422/10-I] [FHD/24p/422/10-L] [FHD/24p/420/8-L]...
Page 329: Connections With External Devices (Video)
Connections with External Devices (Video) HDMI Devices (HDMI Output) You can record while outputting the camera images to an external monitor or external recorder connected with an HDMI cable. HDMI output control differs between during recording and during playback. Refer to page for HDMI output settings during playback.
Page 330: Attaching The Cable Holder
12. Connections with External Devices (Video) Use a “High Speed HDMI cable” with the HDMI logo. Cables that do not comply with the HDMI standards will not work. “High Speed HDMI cable” (Type A–Type A plug, up to 1.5 m (4.9 feet) long) Attaching the Cable Holder Use of the supplied cable holder prevents detachment of the cable and damage to the terminals.
Page 331 12. Connections with External Devices (Video) Fit the USB connection cable (C–C or A–C) E and HDMI cable F to the clamp. Slide the clamp portion G to attach it to the cable holder. Connect the USB connection cable (C– C or A–C) to the USB port H.
Page 332 12. Connections with External Devices (Video) Adjusting the Monitor Angle You can adjust the angle of the monitor while it is tilted l 55) by rotating it, without interfering with the connection cables. Do not use any other USB connection cables except the supplied USB connection cables (C–C and A–C).
Page 333: Images Output Via Hdmi
12. Connections with External Devices (Video) Images Output via HDMI The images output via HDMI differ depending on the recording mode. ] Mode Aspect ratio, resolution, and frame rate output is according to the [Rec Quality] settings in the [Video] ([Image Format]) menu. Resolution and frame rate can be down-converted for output according to the application.
Page 334 12. Connections with External Devices (Video) [iA]/[P]/[A]/[S]/[M] Mode Output is the same as [ ] mode during video recording or when [Video- Priority Display] is set to [ON]. Output is with a 16:9 aspect ratio during recording standby. Resolution, frame rate, YUV, and bit value output matches the connected device. When set to any [Aspect Ratio] other than 16:9, bands are added to the images and they are output with a 16:9 aspect ratio.
Page 335: Hdmi Output Image Quality (Resolution/Frame Rate)
12. Connections with External Devices (Video) HDMI Output Image Quality (Resolution/ Frame Rate) Settings for Down-Converting Make settings for the down-conversion of resolution and frame rate for HDMI output in the [ ] mode. [HDMI Rec Output] Select [Down Convert] [AUTO] Outputs by down-converting to match the connected device.
Page 336 12. Connections with External Devices (Video) [System Frequency]: [59.94Hz (NTSC)] Resolution and recording frame rate of the [Rec Quality] 6K/23.98p 5.9K/23.98p 5.9K/29.97p [Down 4K-A/47.95p 5.4K/29.97p C4K/47.95p Convert] C4K/59.94p 4K-A/23.98p 4K-A/29.97p C4K/23.98p 4K/47.95p 4K/29.97p 4K/23.98p [4K/30p] — 4K/29.97p 4K/29.97p — [1080p] 1080/23.98p 1080/29.97p ¢1...
Page 337 12. Connections with External Devices (Video) [System Frequency]: [50.00Hz (PAL)] Resolution and recording frame rate of the [Rec Quality] 5.9K/25.00p [Down 5.4K/25.00p 4K-A/50.00p Convert] C4K/50.00p C4K/25.00p 4K-A/25.00p 4K/50.00p 4K/25.00p [4K/25p] 4K/25.00p 4K/25.00p 4K/25.00p 4K/25.00p [1080p] 1080/25.00p ¢2 1080/50.00p 1080/50.00p 1080/25.00p ¢2 [1080i] 1080/50.00i...
Page 338: Hdmi Output Settings
12. Connections with External Devices (Video) HDMI Output Settings Outputting the Camera Information Display via HDMI Output the camera information display to an external device connected by HDMI. [HDMI Rec Output] Select [Info Display] Settings: [ON]/[OFF] Outputting Control Information to an External Recorder Recording start and stop control information is output to an external recorder connected by HDMI.
Page 339: Outputting Down-Converted Audio To An Hdmi Device
12. Connections with External Devices (Video) Outputting Down-converted Audio to an HDMI Device When an XLR Microphone Adaptor (DMW-XLR1: optional) is attached, audio is down-converted to a format suitable for the connected HDMI external device before being output. [HDMI Rec Output] Select [Sound Down Convert] [AUTO]...
Page 340: External Microphones (Optional)
12. Connections with External Devices (Video) External Microphones (Optional) With a Stereo Shotgun Microphone (DMW-MS2: optional) or Stereo Microphone (VW-VMS10: optional), you can record higher-quality audio compared to the built-in microphone. Set the [Mic Socket] that suits the device to be connected.
Page 341 12. Connections with External Devices (Video) Connect the camera and external microphone. If mounting the external microphone on the camera hot shoe A, remove the hot shoe cover. (l 228) Do not use the stereo microphone cables with the length of 3 m (9.8 feet) or more.
Page 342 12. Connections with External Devices (Video) You can register the [MANUAL] sound pickup range setting in an Fn button: [Fn Button Set] [Setting in REC mode] [Mic. Directivity Adjust] (l 367) Reduction of Wind Noise This reduces wind noise when an external microphone is connected. Select [Wind Cut] Settings: [HIGH]/[STANDARD]/[LOW]/[OFF] While the external microphone is connected, [...
Page 343: Xlr Microphone Adaptor (Optional)
12. Connections with External Devices (Video) XLR Microphone Adaptor (Optional) By attaching an XLR Microphone Adaptor (DMW-XLR1: optional) to the camera, you can use a commercially available XLR microphone to enable the recording of superior-quality high-res/stereo audio. A Hot shoe B Commercially available XLR microphone Getting started: Turn off the camera, and remove the hot shoe cover.
Page 344 12. Connections with External Devices (Video) While an XLR Microphone Adaptor is attached, [ ] is displayed on the screen. When [XLR Mic Adaptor Setting] is set to other than [OFF], the following settings are fixed: – [Sound Rec Level Limiter]: [OFF] –...
Page 345: Headphones
12. Connections with External Devices (Video) Headphones You can record videos while monitoring their sound by connecting commercially available headphones to the camera. Do not use the headphone cables with the length of 3 m (9.8 feet) or more. When headphones are connected, beep sounds, AF beep, and electronic shutter sounds are muted.
Page 346 12. Connections with External Devices (Video) Adjusting the Headphone Volume Connect the headphones and rotate : Reduces the volume. : Increases the volume. You can also adjust the volume by touching [ ] on the playback screen. To adjust the volume using the menu: Select [Headphone Volume].
Page 347: Playing Back And Editing Of Images
Playing Back and Editing of Images This chapter explains how to play back and delete pictures and videos. It also explains editing using [RAW Processing] (l 359) and [Video Divide] (l 364). For [Playback] menus other than [RAW Processing] and [Video Divide], refer to “[Playback] Menu”...
Page 348 13. Playing Back and Editing of Images Stop playback. ≥Press the shutter button halfway. ≥You can also stop playback by pressing [(]. Switching the Card to Display Images are displayed separately by card slot. You can switch the card displayed just by pressing the Fn button during playback.
Page 349: Playing Back Videos
13. Playing Back and Editing of Images Playing Back Videos Display the playback screen. ≥Press [(]. Select a video. For information about how to select 8m30s 8m30s 8m30s images, refer to page 347. The [ ] video icon is displayed for a video.
Page 350 13. Playing Back and Editing of Images Operations During Video Playback Button Touch Description of operation operation operation Plays/pauses. — Stops. Performs fast-rewind playback. If you press 2 again, the fast-rewind speed increases. Performs frame-by-frame rewinding (while — paused). When you press 2 during playback of AVCHD video, rewinding at intervals of approx.
Page 351: Extracting A Picture
13. Playing Back and Editing of Images Extracting a Picture Extract one frame of a video and save it as a JPEG image. Pause playback at the position you wish to extract a picture. ≥Press 3. To fine-adjust the position, press 21 (rewind frame-by-frame or forward frame- 00:06:10 00:06:10...
Page 352: Switching The Display Mode
13. Playing Back and Editing of Images Switching the Display Mode You can use features to do things like enlarge recorded images for display and switch to thumbnail display to display multiple images at once (multi- playback). You can also switch to calendar display to show images of a selected recording date.
Page 353 13. Playing Back and Editing of Images Operations During Enlarged Display Button Touch Description of operation operation operation Enlarges/reduces the screen. Pinch out/ Enlarges/reduces the screen in small steps. pinch in Moves the enlarged display position. Drag Positions can be moved to the diagonal 3421 directions using the joystick.
Page 354: Thumbnail Screen
13. Playing Back and Editing of Images Thumbnail Screen Switch to thumbnail display. 1/999 to the left. ≥Rotate ≥The display is switched in the order of 12-image screen 30-image screen. A Card An orange frame is shown around the selected image. Rotating to the left during 30-image screen display switches to calendar display.
Page 355: Calendar Playback
13. Playing Back and Editing of Images Calendar Playback Switch to calendar playback. to the left. ≥Rotate 2019 ≥The display is switched in the order of thumbnail screen (12 images) Thumbnail screen (30 images) Calendar playback. Rotating to the right returns to the previous display. Select the recording date.
Page 356: Group Images
13. Playing Back and Editing of Images Group Images Images recorded with Time Lapse Shot or Stop Motion Shooting are handled as group images in the camera, and can be deleted and edited on a group basis. (For example, if you delete a group image, all images in the group are deleted.) You can also delete and edit each image in a group individually.
Page 357: Deleting Images
13. Playing Back and Editing of Images Deleting Images Images cannot be restored once they have been deleted. Carefully confirm the images before deletion. You can only delete the images in the card of the selected card slot. If you delete a group image, all images in the group are deleted. [Delete Single] Press [ ] in playback state.
Page 358 13. Playing Back and Editing of Images To switch the card selected for deleting images, press [ ] and then select the card slot. Depending on the number of images to be deleted, it may take some time to delete them. [Delete All] can be used when [Playback Mode] is set to [Normal Play].
Page 359: [Raw Processing]
13. Playing Back and Editing of Images [RAW Processing] This processes pictures taken in RAW format on the camera and saves them in JPEG format. You can also save images recorded with [HLG Photo] in the RAW format as HLG format. Select [RAW Processing].
Page 360 13. Playing Back and Editing of Images Change the setting. , or ≥Rotate The image can be enlarged/reduced by pinching out/pinching in the screen. DISP. - 2 - 2 - 1 - 1 +1 +1 +2 +2 Confirm the setting. ≥Press ≥The screen of Step reappears.
Page 361 13. Playing Back and Editing of Images Setting Items ([RAW Processing]) [Begin Processing] Saves the image. Selects and adjusts the white balance. Selecting the item with [ ] enables processing with the same setting as at the time of recording. [White Balance] If you press 4 in the [White Balance] selection screen, the white balance adjustment screen appears.
Page 362 13. Playing Back and Editing of Images [Noise Reduction] Sets noise reduction. [Sharpness] Adjusts the sharpness. [Revert To Original]: Returns the settings to the ones from the time of recording. [File Format]: Selects a file format from [JPG] or [HLG]. When you select [HLG], both JPEG format and HSP format pictures are saved.
Page 363 13. Playing Back and Editing of Images Displaying a Comparison Screen You can change a setting while checking the effect by displaying images with the applied setting value side by side. Press [DISP.] in the screen of Step The image with the current setting A is displayed at the centre.
Page 364: [Video Divide]
13. Playing Back and Editing of Images [Video Divide] Divide a recorded video or 6K/4K burst file into two. Images cannot be returned to their original state once they have been divided. Carefully confirm the images before performing the divide operation. Do not remove the card or battery from the camera during the divide process.
Page 365 13. Playing Back and Editing of Images Divide the video. ≥Press ≥You can also divide the video by touching [Divide]. Dividing the video at a point close to the start or end may not be possible. Videos with a short recording time cannot be divided. [Video Divide] cannot be used on images recorded using [Segmented File Recording].
Page 366: Camera Customisation
Camera Customisation This chapter describes the customisation function with which you can configure the camera to your preferred settings. Change how buttons, dials, etc. on the camera are to be operated. [Fn Button Set] [Dial Operation Switch Setup] Register the currently set information of the camera. Custom mode Change menu display items.
Page 367: Fn Buttons
14. Camera Customisation Fn Buttons You can register functions to the Fn (Function) buttons. Additionally, you can register other functions to specialised buttons such as [WB] button, in the same way as with the Fn buttons. Different functions can be set for both during recording and playback. Fn Button Default Settings 4 5 6 10 11...
Page 368 14. Camera Customisation Fn buttons [Setting in REC mode] [Setting in PLAY mode] [Fn3] [Wi-Fi] [Fn4] [Histogram] [Fn5] [Boost I.S. (Video)] [Fn6] [No Setting] [Fn7] [No Setting] [Fn8] [Fn9] Cannot be used as Fn [No Setting] [Fn10] buttons during playback. [Fn11] [Fn12] [Fn13]...
Page 369 14. Camera Customisation Register Functions to the Fn Buttons With default settings, [Fn8] to [Fn12] on the joystick cannot be used. When using functions, set the [Joystick Setting] in the [Custom] ([Operation]) menu to [Fn]. (l 429) Select [Fn Button Set]. [Fn Button ≥...
Page 370 14. Camera Customisation Register the function. ≥Press 34 to select a function and then press ≥Selection is also possible by rotating Select items with [N] by selecting the item again. Depending on the button, some functions cannot be registered. You can also touch [ ] on the control panel (l 70) to display the screen in Step You can also press and hold the Fn button (2 sec.) to display the screen in...
Page 371 14. Camera Customisation Setting Items ([Fn Button Set]/[Setting in REC mode]) [1] tab [Image Quality] [Focus/Shutter] [Exposure Comp.] [AF Mode] [Dual Native ISO Setting] [AF Custom Setting(Photo)] [Sensitivity] [AF Custom Setting(Video)] [White Balance] [Focus Peaking] [Photo Style] [Focus Peaking Sensitivity] [Metering Mode] [1-Area AF Moving Speed] [Aspect Ratio]...
Page 372 14. Camera Customisation [Others (Photo)] [Silent Mode] [Drive Mode] [Image Stabilizer] [Shutter Type] [1 Shot "6K/4K PHOTO"] Performs 6K/4K photo recording only [Ex. Tele Conv.] once. [Flicker Decrease (Photo)] [Bracketing] [Post-Focus] [2] tab [Image Format] [Operation] [Motion Pic. Rec Format] [Q.MENU] [Motion Pic.
Page 373 14. Camera Customisation [Video-Priority Display] [Lens / Others] [Status-LCD Display(Video)] [Focus Ring Control] [Zebra Pattern] [Zoom Control] [LUT View Assist (Monitor)] [LUT View Assist (HDMI)] [LUT Select] [HLG View Assist (Monitor)] [HLG View Assist (HDMI)] [Sheer Overlay] [I.S. Status Scope] [WFM/Vector Scope] [Anamorphic Desqueeze Display] [Color Bars]...
Page 374 14. Camera Customisation Setting Items ([Fn Button Set]/[Setting in PLAY mode]) [1] tab [Playback Mode] [Operation] [Magnify from AF Point] [Rec / Playback Switch] Switches to the recording screen. [LUT View Assist (Monitor)] [HLG View Assist (Monitor)] [LVF/Monitor Switch] [Anamorphic Desqueeze Display] [Video Record] [Process Image] [Monitor / Display]...
Page 375 14. Camera Customisation Use the Fn Buttons During recording, pressing the Fn buttons enables usage of the functions registered in [Setting in REC mode], and during playback, usage of the functions registered in [Setting in PLAY mode]. Press the Fn button. Select a setting item.
Page 376: [Dial Operation Switch]
14. Camera Customisation [Dial Operation Switch] This temporarily changes the functions operated with (front dial) and (rear dial). Register Functions to the Dials Register functions to each of Select [Dial Operation Switch Setup]. [Dial Set.] ≥ [Dial Operation Switch Setup] Register the function.
Page 377 14. Camera Customisation Temporarily Change Dial Operation Use the Fn button to temporarily change dial operation. Set [Dial Operation Switch] to the Fn button. (l 367) Switch dial operation. ≥Press the Fn button set in Step ≥A guide will display the functions registered to If no operations are performed, then several seconds later, the guide...
Page 378: Quick Menu Customisation
14. Camera Customisation Quick Menu Customisation You can change Quick menu items depending on the recording mode. Additionally, you can change the items to display on the Quick menu and their order to suit your preferences. For information about Quick menu operation methods, refer to page 73. Register to the Quick Menu Change the menus to be displayed in the Quick menu.
Page 379 14. Camera Customisation Find the function to register. to select the sub tab ≥Rotate where the function to register is categorised (l 380) and then press ≥You can also select by pressing 2 to select the sub tab, pressing 34 or rotating , and then pressing 1.
Page 380 14. Camera Customisation Menu Items That Can Be Registered [1] tab [Image Quality] [Others (Photo)] [Exposure Comp.] [Drive Mode] [Dual Native ISO Setting] [Bracketing] [Sensitivity] [Silent Mode] [White Balance] [Image Stabilizer] [Photo Style] [Shutter Type] [Metering Mode] [Ex. Tele Conv.] [Aspect Ratio] [Flicker Decrease (Photo)] [Picture Quality]...
Page 381 14. Camera Customisation [2] tab [Monitor / Display] [Lens / Others] [Constant Preview] [Focus Ring Control] [Level Gauge] [Card/File] [Histogram] [Destination Card Slot] [Luminance Spot Meter] [IN/OUT] [Video Frame Marker] [Wi-Fi] [Photo Grid Line] [Fan Mode] [Live View Boost] [Others] [Monochrome Live View] [No Setting] •...
Page 382 14. Camera Customisation Quick Menu Detailed Settings Change the appearance of the Quick menu and the operation of during menu display. Select [Q.MENU Settings] Changes the appearance of the Quick menu. [MODE1]: Displays the live view and the menu [Layout Style] simultaneously.
Page 383: Custom Mode
14. Camera Customisation Custom Mode Recording modes and menu settings that match your preferences can be registered in Custom mode. You can use registered settings by switching the mode dial to [C1] to [C3] modes. Register in Custom Mode You can register the currently set information of the camera. At the time of purchase, the default settings of the [P] mode menus are registered with all Custom modes.
Page 384 14. Camera Customisation You cannot register [iA] mode in Custom mode. List of settings that can be registered in Custom mode (l 587) Custom Mode Detailed Settings Sets the ease of use of Custom mode. You can create additional Custom mode sets, and how long to retain temporarily changed settings details.
Page 385 14. Camera Customisation Using Custom Mode Set the mode dial to one of [C1] to [C3]. If [C3], the last-used Custom mode will be ≥ called up. [C3] Custom Mode Selection Set the mode dial to [C3]. Press The Custom mode selection menu appears. Press 34 to select the Custom mode and then press The selected Custom mode icon will be...
Page 386 14. Camera Customisation Calling Up Settings Call up registered Custom mode settings to the selected recording mode and overwrite the current settings with these. Set to the mode dial to use. Select [Load Custom Mode]. [Load ≥ Custom Mode] Select the Custom mode to call up.
Page 387: My Menu
14. Camera Customisation My Menu Register frequently-used menus in My Menu. A maximum of 23 items can be registered. Registered menus can be called up from [ ] to [ Registration in My Menu Select a menu, and register this in My Menu. Select [Add].
Page 388 14. Camera Customisation Edit My Menu You can reorder the display order of My Menu, and delete unnecessary menus. Select [ Selects and registers the menus to be displayed in My [Add] Menu. Changes the order of My Menu. [Sorting] Select the menu to change, then set the destination.
Page 389: [Save/Restore Camera Setting]
14. Camera Customisation [Save/Restore Camera Setting] Saves the camera’s settings information to the card. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. Select [Save/Restore Camera Setting] Saves the camera’s settings information to the card. If saving new data, then select [New File], and if overwriting an existing file, select that existing file.
Page 390: Menu Guide
Menu Guide Camera customisation and many function settings are performed with menus on this camera. This chapter provides a list of menus and describes them in detail. Menus explained in detail in other chapters are indicated with page numbers. For information about menu operation methods, refer to page 77. Search the Menus List of Menu Learn About the Menu Functions and Default Settings...
Page 391: List Of Menu
15. Menu Guide List of Menu : Menu items common to the [Photo] menu and [Video] menu. Their settings are synchronised. [Photo] menu [Flash Adjust.] [Image Quality] [Flash Synchro] [Photo Style] [Manual Flash Adjust.] [Metering Mode] [Auto Exposure Comp.] [Aspect Ratio] [Red-Eye Removal] [Picture Quality] [Wireless]...
Page 392 15. Menu Guide [Video] menu [1-Area AF Moving [Image Quality] Speed] [Exposure Mode] [Audio] [Photo Style] [Sound Rec Level Disp.] [Metering Mode] [Mute Sound Input] [Dual Native ISO Setting] [Sound Rec Gain Level] [ISO Sensitivity (video)] [Sound Rec Level Adj.] [Synchro Scan] [Sound Rec Level Limiter]...
Page 393 15. Menu Guide [Custom] menu [ISO Displayed Setting] [Image Quality] [Exposure Comp. Disp. [Photo Style Settings] Setting] [ISO Increments] [Dial Set.] [Extended ISO] [Joystick Setting] [Exposure Offset Adjust.] [Illuminated Button] [Color Space] [Video Rec. Button (Remote)] [Exposure Comp. Reset] [Monitor / Display [Auto Exposure in P/A/S/M] (Photo)] [CreativeVideo Combined Set.] l...
Page 394 15. Menu Guide [Custom] menu (Continued) [Monitor / Display [Video-Priority Display] (Video)] [Red REC Frame Indicator] [V-Log View Assist] [IN/OUT] [HLG View Assist] [HDMI Rec Output] [Anamorphic Desqueeze [Fan Mode] Display] [Tally Lamp] [Monochrome Live View] [Lens / Others] [Center Marker] [Lens Focus Resume] [Video Frame Marker] [Focus Ring Control]...
Page 395 15. Menu Guide [Setup] menu (Continued) [Pixel Refresh] [Others] [Sensor Cleaning] [Clock Set] [Language] [Time Zone] [Firmware Version] [System Frequency] [Online Manual] [My Menu] [Page 1] [Edit My Menu] [Page 2] [Add] [Page 3] [Sorting] [Delete] [Display from My Menu] [Playback] menu [Playback Mode] [Add/Delete Info.]...
Page 396: [Photo] Menu
15. Menu Guide [Photo] Menu : Menu items common to the [Photo] menu and [Video] menu. Their settings are synchronised. : Default settings [Photo] menu [Image Quality] [Standard]/[Vivid]/[Natural]/[Flat]/[Landscape]/ [Portrait]/[Monochrome]/[L.Monochrome]/ [L.Monochrome D]/[Cinelike D2]/[Cinelike V2]/ [Like709]/[V-Log]/[Standard(HLG)]/ [Monochrome(HLG)]/[MY PHOTO STYLE 1] to [Photo Style] [MY PHOTO STYLE 10] You can select the finishing settings of images to suit your subjects and expression styles.
Page 397 15. Menu Guide [Photo] menu [Image Quality] [Start] [Simul Record [ON]/[OFF] Normal Shot] [Shutter Delay] [30 SEC] to [1/8 SEC] ( [2 [High Resolution SEC])/[OFF] Mode] [Motion Blur [MODE1]/[MODE2] Processing] Merges pictures with a high resolution from multiple recorded images. [ON]/[OFF] The camera automatically removes noise generated when recording images with a slow...
Page 398 15. Menu Guide [Photo] menu [Image Quality] [ISO Auto Lower [100] to [25600] Limit Setting] [ISO Auto Upper [AUTO]/[200] to [51200] [ISO Sensitivity Limit Setting] — (photo)] Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO]. [AUTO]/[1/8000] to [1/1] Sets the minimum shutter speed when the ISO sensitivity is set to [AUTO].
Page 399 15. Menu Guide [Photo] menu [Image Quality] [AUTO]/[HIGH]/[STANDARD]/[LOW]/ [OFF] Contrast and exposure are compensated when the brightness difference between the background and subject is great. Compensation effect may not be achieved depending on the recording conditions. — [i.Dynamic Range] When the following functions are being used, [i.Dynamic Range] is not available: –...
Page 400: [Vignetting Comp.] L
15. Menu Guide [Photo] menu [Image Quality] [ON]/[OFF] When the screen periphery darkens as a result of the lens characteristics, you can record pictures with the brightness of the screen periphery corrected. Compensation effect may not be achieved depending on the recording conditions. Noise in the periphery of the picture may stand out with higher ISO sensitivity.
Page 401: [Filter Settings] L
15. Menu Guide [Photo] menu [Image Quality] [Filter Effect] [ON]/ [OFF]/[SET] [Simultaneous [ON]/ [OFF] Record w/o Filter] [Filter Settings] This mode records with additional image effects (filters). [Photo] menu [Focus] [Set 1]/[Set 2]/[Set 3]/[Set 4] [AF Custom Select features of AF operation when recording Setting(Photo)] using [AFC] that are appropriate for the subject and scene.
Page 402 15. Menu Guide [Photo] menu [Focus] [ON]/[OFF] [SET] [Focus Peaking Sensitivity] [Display Color] [Display While AFS] During MF operation, in-focus portions (portions on the screen with clear outlines) are highlighted with colour. If the [Focus Peaking Sensitivity] is adjusted to the negative direction, portions to be highlighted are reduced, allowing you to achieve a more precise focus.
Page 403 15. Menu Guide [Photo] menu [Focus] [FAST]/[NORMAL] Sets the speed when moving a single AF area. [1-Area AF Moving — This operates when AF mode is set to [ ], [ Speed] or [ This menu item can be registered to the Fn button.
Page 404 15. Menu Guide [Photo] menu [Flash] [ON]/ [OFF] When [Flash Mode] is set to [ ] or [ ], the [Red-Eye Removal] camera automatically detects red-eye and corrects image data. [ON]/ [OFF] [Wireless] Enables recording using a wireless flash. [1CH]/[2CH]/[3CH]/[4CH] [Wireless Channel] Sets the channel to use when recording with a wireless flash.
Page 405 15. Menu Guide [Photo] menu [Others (Photo)] [Bracketing Type] ]/ [OFF] [Bracketing] [More Settings] You can take multiple pictures while automatically adjusting a setting. [ON]/ [OFF] Disables all operation sounds and light output at [Silent Mode] once. [Operation Mode] ]/[OFF] [Body(B.I.S.) / ]/ [ Lens(O.I.S.)]...
Page 406 15. Menu Guide [Photo] menu [Others (Photo)] [8SEC]/[4SEC]/[2SEC]/[1SEC]/ [OFF] To reduce camera shake and shutter-induced blur, the shutter is released after the specified time has [Shutter Delay] — passed since the shutter button was pressed. When the following functions are being used, [Shutter Delay] is not available: –...
Page 407 15. Menu Guide [Photo] menu [Others (Photo)] [ON]/ [OFF] Detects flickering such as that under fluorescent lighting, and records using a timing that minimises this. The reduction effect may not be obtained depending on the recording conditions. [Flicker Decrease When Flicker Decrease is operating, the —...
Page 408 15. Menu Guide [Photo] menu [Others (Photo)] [6K 18M]/[4K 8M]/ [OFF] Taking burst pictures with the same image quality as 6K/4K photos while automatically changing the [Post-Focus] focus point. You can select the focus point for the picture to save after recording. [Start] [Auto Gain] [ON]/[OFF]...
Page 409 15. Menu Guide [Photo] menu [Others (Photo)] Recording the picture will automatically stop multiple exposure recording. To finish multiple exposure recording before starting the recording, press [Q] on the recording screen. Recording information for the last-recorded image will be saved as recording information for images recorded with multiple exposures.
Page 410: [Video] Menu
15. Menu Guide [Video] Menu : Menu items common to the [Photo] menu and [Video] menu. Their settings are synchronised. : Default settings [Video] menu [Image Quality] [P]/[A]/[S]/[M] [Exposure Mode] Sets the exposure mode to use in [ ] mode. [Standard]/[Vivid]/[Natural]/[Flat]/[Landscape]/ [Portrait]/[Monochrome]/[L.Monochrome]/ [L.Monochrome D]/[Cinelike D2]/[Cinelike V2]/...
Page 411: [Flicker Decrease (Video)]
15. Menu Guide [Video] menu [Image Quality] [1/50]/[1/60]/[1/100]/[1/120]/ [OFF] [Flicker Decrease The shutter speed can be fixed to reduce the — (Video)] flicker or striping in the video. This can be set when [Auto Exposure in P/A/S/ M] is [ON]. [j15] to [15] ( [0]) [Master Pedestal You can adjust the black level, which serves as the...
Page 412: [Image Format] L
15. Menu Guide [Video] menu [Image Format] [AVCHD]/ [MP4]/[MOV] [Rec. File Format] Sets the video recording file format. [FULL]/[S35mm]/[PIXEL/PIXEL] [Image Area of Video] Sets the image area during video recording. [Rec Quality] Sets the video recording image quality. [Rec Quality (My Calls up a recording quality registered in My List.
Page 413: [Focus] L
15. Menu Guide [Video] menu [Focus] [ON]/ [OFF] [SET] [AF Speed]/ [AF Custom [AF Sensitivity] Setting(Video)] You can fine-adjust the focusing method for video recording using [Continuous AF]. [MODE1]/[MODE2]/[OFF] [Continuous AF] You can select how to set the focus in AF when recording videos.
Page 414: [Sound Rec Gain Level] L
15. Menu Guide [Video] menu [Audio] [STANDARD]/[LOW] [Sound Rec Gain Level] This switches the gain of audio input. [MUTE], [j18dB] to [i12dB] ( [0dB]) [Sound Rec Level Adj.] Manually adjust the sound recording level. [ON]/[OFF] [Sound Rec Level The sound recording level is adjusted Limiter] automatically to minimise sound distortion (crackling noise).
Page 415: [Headphone Volume] L
15. Menu Guide [Video] menu [Audio] [0] to [LEVEL15] ( [LEVEL3]) [Headphone Adjusts the volume when headphones are Volume] connected. [Video] menu [Others (Video)] [ON]/ [OFF] Disables all operation sounds and light output at [Silent Mode] once. [Operation Mode] ]/[OFF] [Body(B.I.S.) / ]/ [ Lens(O.I.S.)]...
Page 416: [Focus Transition] L
15. Menu Guide [Video] menu [Others (Video)] [Start] [Focus Pull Setting] [1]/[2]/[3] [Focus Transition [SH]/[H]/ [M]/[L]/[SL] Speed] [Focus Transition [1]/[2]/[3]/ [OFF] [Focus Transition] Rec] [Focus Transition [10SEC]/[5SEC]/ [OFF] Wait] Smoothly transitions the focus position from the current position to a position registered in advance.
Page 417: [Time Stamp Rec.] L
15. Menu Guide [Video] menu [Others (Video)] [ON]/ [OFF] Records the recorded date and time superimposed on the images. You cannot delete recording dates after superimposing them. The recorded date and time are not recorded in — [Time Stamp Rec.] 6K/4K burst files or RAW images.
Page 418: [Custom] Menu
15. Menu Guide [Custom] Menu : Default settings [Custom] menu [Image Quality] [Show/Hide Photo [Vivid]/[Natural]/[Flat]/[Landscape]/ Style] [Portrait]/[L.Monochrome]/ [L.Monochrome D]/[Cinelike D2]/ [Cinelike V2]/[Like709]/[V-Log]/ [Like2100(HLG)]/[MY PHOTO STYLE 1] to [MY PHOTO STYLE Sets Photo Style items to be displayed on the menu. [My Photo Style [Add Effects] Settings]...
Page 419 15. Menu Guide [Custom] menu [Image Quality] [ON]/ [OFF] Extends the setting range of ISO sensitivity. The extendible range depends on the [Dual Native ISO Setting] (l 203). [Extended ISO] – When set to [AUTO]: Lower limit can be extended to [50] and the upper limit can be extended to [204800] –...
Page 420 15. Menu Guide [Custom] menu [Image Quality] [sRGB]/[AdobeRGB] This sets the method for correcting the colour reproduction of the recorded images on the screens of a PC or on a device such as a printer. [sRGB]: This is widely used in PCs and similar devices. [AdobeRGB]: AdobeRGB is mainly used for business purposes such as professional printing because it has a [Color Space]...
Page 421 15. Menu Guide [Custom] menu [Focus/Shutter] [AFS] [FOCUS]/[BALANCE]/[RELEASE] [AFC] [FOCUS]/ [BALANCE]/[RELEASE] This sets whether to give priority to focus or shutter release during AF. [Focus/Shutter [FOCUS]: Disables recording when focus is not achieved. Priority] [BALANCE]: Performs recording while controlling the balance between focusing and shutter release timing.
Page 422 15. Menu Guide [Custom] menu [Focus/Shutter] [Focus Ring] [ON]/[OFF] [AF Mode] [ON]/[OFF] [Press Joystick] [ON]/ [OFF] [MF Assist Display] [FULL]/ [PIP] This sets the display method of MF Assist (enlarged screen). [Focus Ring]: The screen is enlarged by focusing with the lens.
Page 423 15. Menu Guide [Custom] menu [Focus/Shutter] [Face/Eye/Body/ [ON]/[OFF] Animal Detect.] [Tracking] [ON]/[OFF] [225-Area] [ON]/[OFF] [Zone (Vert./ Horz.)] [ON]/[OFF] [Zone (Square)] [ON]/ [OFF] [Zone (Oval)] [ON]/[OFF] [Show/Hide AF Mode] [1-Area+] [ON]/[OFF] [Pinpoint] [ON]/[OFF] [Custom1] [ON]/ [OFF] [Custom2] [ON]/ [OFF] [Custom3] [ON]/ [OFF] Sets the AF mode items to be displayed on the AF mode selection screen.
Page 424 15. Menu Guide [Custom] menu [Focus/Shutter] [Keep Enlarged [ON]/ [OFF] Display] [PIP Display] [FULL]/ [PIP] Changes the enlarged screen settings of AF-Point Scope [AF-Point Scope (l 100). Setting] [Keep Enlarged Display]: Setting this to [ON] maintains the enlarged screen after pressing the Fn button until it is pressed again.
Page 425 15. Menu Guide [Custom] menu [Focus/Shutter] [ON]/ [OFF] [Looped Focus When moving the AF area or MF Assist, this enables its Frame] position to loop from one edge to the other edge of the screen. [ON]/ [OFF] [AFC Start Point When the focus mode is set to [AFC] in the [ ] AF mode, (225-Area)]...
Page 426 15. Menu Guide [Custom] menu [Operation] [Cursor] [Joystick] [Touch Screen] [Dial] Sets the operations to be disabled with the operation lock [Lock Lever Setting] lever. (Only for recording screen) [Cursor]: Cursor buttons, [MENU/SET] button, and [Joystick]: Joystick [Touch Screen]: Touch screen [Dial]: , and [Setting in REC mode]...
Page 427 15. Menu Guide [Custom] menu [Operation] [WHILE PRESSING]/[AFTER PRESSING1]/ [AFTER PRESSING2] This sets the operation to be performed when [WB] (White balance), [ISO] (ISO sensitivity) or [ ] (Exposure compensation) is pressed. [WHILE PRESSING]: Allows you to change the setting while pressing and holding the button.
Page 428 15. Menu Guide [Custom] menu [Operation] [Assign Dial (F/SS)] [SET1]/[SET2]/[SET3]/[SET4]/ [SET5] Sets the operations to be assigned to the dials in [P]/[A]/[S]/ [M] modes. : Programme Shift, F: Aperture value, SS: Shutter speed [SET1] [SET2] [SET3] [SET4] [Dial Set.] [SET5] [Rotation (F/SS)] Changes the rotational directions of the dials for aperture value and shutter speed adjustment.
Page 429 15. Menu Guide [Custom] menu [Operation] [Exposure Comp.] ]/ [OFF] Assigns exposure compensation to . (Except in [M] mode) The [Assign Dial (F/SS)] setting takes priority. [Dial Operation Switch Setup] [Dial Set.] In the Fn button [Dial Operation Switch], this sets the (Continued) functions to be registerd temporarily to (l 376)
Page 430 15. Menu Guide [Custom] menu [Operation] You can register a favourite function to the video rec. button [Video Rec. Button on a Shutter Remote Control (optional). (Remote)] [Video Record] is registered in the default setting. For details, refer to page 540. [Custom] menu [Monitor / Display (Photo)] [Duration Time...
Page 431 15. Menu Guide [Custom] menu [Monitor / Display (Photo)] [ON]/ [OFF] [SET] [Preview While MF Assist] You can always confirm the effects of aperture and shutter speed on the recording screen when in [M] mode. [Constant Preview] Preview also operates in the MF Assist screen when [Preview While MF Assist] is set to [ON].
Page 432 15. Menu Guide [Custom] menu [Monitor / Display (Photo)] [ON]/ [OFF] This displays the histogram. Turning this [ON] displays the histogram transition screen. Press 3421 to set the position. Positions can be moved to the diagonal directions using the joystick. You can also move the position by dragging the histogram on the recording screen.
Page 433 15. Menu Guide [Custom] menu [Monitor / Display (Photo)] ]/ [OFF] Sets the grid line pattern to be displayed on the recording screen. When using [ ], you can press 3421 to set the position. Positions can be moved to the diagonal directions using the [Photo Grid Line] joystick.
Page 434 15. Menu Guide [Custom] menu [Monitor / Display (Photo)] [MODE1]/[MODE2]/ [OFF] [SET] [P/A/S/M]/ [M] Displays the screen brighter to make it easier to check subjects and compositions even in low-light environment. [MODE1]: Setting for low brightness, with priority given to a soft display.
Page 435 15. Menu Guide [Custom] menu [Monitor / Display (Photo)] [Monitor] [ON]/ [OFF] [LVF] [ON]/ [OFF] Displays the monitor and viewfinder in red. In dark environments, this reduces brightness of the screen that can make the surroundings difficult to see. You can also set the luminance of the red display. Press 3421 to select [ON] on the monitor or viewfinder (LVF).
Page 436 15. Menu Guide [Custom] menu [Monitor / Display (Photo)] [ON]/ [OFF] This displays the exposure meter. [Expo.Meter] Set to [ON] to display the exposure meter when performing Programme Shift, setting aperture, and setting shutter speed. If no operations are performed for a certain period of time, the exposure meter disappears.
Page 437 15. Menu Guide [Custom] menu [Monitor / Display (Photo)] [ON]/ [OFF] [SET] [Transparency] [Image Select] [Reset at Power Off] Displays recorded pictures by overlapping on the recording screen. Use [Image Select] to select the pictures to be displayed. [Sheer Overlay] Press 21 to select pictures and then press to confirm.
Page 438 15. Menu Guide [Custom] menu [Monitor / Display (Photo)] [ON]/[OFF] Displays the level gauge which is useful in correcting camera tilt. A Horizontal B Vertical C Green (no tilt) [Level Gauge] When the camera is not tilted, the level gauge changes to green.
Page 439: [Hlg View Assist] L
15. Menu Guide [Custom] menu [Monitor / Display (Photo)] [ON]/ [OFF] [Luminance Spot Specify any spot on the subject to measure the luminance Meter] over a small area. For details, refer to page 292. [ON]/ [OFF] [Framing Outline] Displays the outline for the live view. [Control Panel] [ON]/[OFF] [Show/Hide Monitor...
Page 440: [Anamorphic Desqueeze Display]
15. Menu Guide [Custom] menu [Monitor / Display (Video)] ]/ [OFF] [Anamorphic This displays the de-squeezed images suited to the Desqueeze Display] magnification of the anamorphic lens on this camera. For details, refer to page 316. [ON]/ [OFF] You can display the recording screen in black and white. If you use the HDMI output during recording, the output [Monochrome Live image will not be displayed in black and white.
Page 441: [Wfm/Vector Scope] L
15. Menu Guide [Custom] menu [Monitor / Display (Video)] [WAVE]/[VECTOR]/ [OFF] [WFM/Vector This displays the waveform monitor or the vector scope on Scope] the recording screen. For details, refer to page 288. [SMPTE]/[EBU]/[ARIB] [Color Bars] The colour bars are displayed on the recording screen. For details, refer to page 296.
Page 442: [In/Out]
15. Menu Guide [Custom] menu [IN/OUT] [Info Display] (l 338) [ON]/[OFF] [Down Convert] [AUTO]/[4K/30p]([4K/25p])/ (l 335) [1080p]/[1080i]/[OFF] [HDMI Recording [ON]/ [OFF] Control] (l 338) [HDMI Rec Output] [Sound Down [AUTO]/ [OFF] Convert] (l 339) [Sound Output [ON]/[OFF] (HDMI)] (l 339) Sets HDMI output during recording.
Page 443: [Lens / Others] L
15. Menu Guide [Custom] menu [Lens / Others] [ON]/ [OFF] [Lens Focus Resume] The camera saves the focus position when you turn it off. [NON-LINEAR]/[LINEAR] [SET] [90°] to [360°] ( [150°])/[Maximum] Sets the amount of movement for focusing using the focus ring.
Page 444: [Setup] Menu
15. Menu Guide [Setup] Menu : Default settings [Setup] menu [Card/File] [Card Slot 1]/[Card Slot 2] [Card Format] Formats the card (initialisation). For details, refer to page 50. [Recording Method] [Double Card Slot This sets the way recording to the card slots 1 and 2 is Function] performed.
Page 445: [Monitor / Display] L
15. Menu Guide [Setup] menu [Monitor / Display] [Sleep Mode] [10MIN.]/ [5MIN.]/[2MIN.]/[1MIN.]/ [OFF] [Sleep Mode(Wi-Fi)] [ON]/[OFF] [Auto LVF/Monitor [5MIN.]/[2MIN.]/[1MIN.]/[OFF] Off] [Power Save Mode] [Power Save LVF [Time to Sleep] Shooting] [Method of Activation] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time.
Page 446: [Monitor Settings]/[Viewfinder] L
15. Menu Guide [Setup] menu [Monitor / Display] [Brightness]/[Contrast]/[Saturation]/[Red Tint]/[Blue Tint] This adjusts the brightness, colouring, and red or blue tints of the monitor/viewfinder. [Monitor Settings]/ Press 34 to select the setting item, and press 21 to [Viewfinder] adjust. Press to confirm the setting.
Page 447: [Status-Lcd] L
15. Menu Guide [Setup] menu [Monitor / Display] [Character/ Background Color] Changes the text colour and background colour for the status LCD. ]: Makes the text white and the background black. ]: Makes the text black and the background white. [Backlight] [H]/[L]/[OFF] Sets how the status LCD backlight turns on.
Page 448: [Level Gauge Adjust.] L
15. Menu Guide [Setup] menu [Monitor / Display] [Adjust.] Hold the camera in a horizontal position, and press [Level Gauge . The level gauge will be adjusted. Adjust.] [Level Gauge Value Reset] Restores the default level gauge setting. [Setup] menu [IN/OUT] [Beep Volume] ] (High)/ [...
Page 449: [In/Out]
15. Menu Guide [Setup] menu [IN/OUT] [Bluetooth] (l 469) [Send Image (Smartphone)] (l 496) [Remote Wakeup] (l 489) [Returning from Sleep Mode] (l 482) [Auto Transfer] (l 486) [Bluetooth] [Location Logging] (l 488) [Auto Clock Set] (l 490) [Wi-Fi network settings] [Wi-Fi network settings]: Registers the Wi-Fi access point.
Page 450: [Battery Information] L
15. Menu Guide [Setup] menu [IN/OUT] Displays the remaining level and degree of deterioration of the battery. If the usage duration drops significantly even when the battery is fully charged, then the battery is at the end of its service life. Check its status, and replace with a new battery.
Page 451: [Tv Connection] L
15. Menu Guide [Setup] menu [IN/OUT] [HDMI Mode [AUTO]/[C4K/60p]/[C4K/50p]/[C4K/ (Playback)] 30p]/[C4K/25p]/[C4K/24p]/[4K/60p]/ [4K/50p]/[4K/30p]/[4K/25p]/[4K/24p]/ [1080p]/[1080i]/[720p]/[576p]/[480p] Sets the HDMI output resolution for playback. [AUTO]: Outputs with a resolution suited to the connected The items you can select depend on the [System Frequency] setting. If no image appears on the TV with [AUTO], switch to a constant setting other than [AUTO] to set a format supported by your TV.
Page 452: [Card Access Light] L
15. Menu Guide [Setup] menu [IN/OUT] [VIERA Link (CEC)] [ON]/ [OFF] You can use the device remote control to operate the camera when it is connected to a VIERA Link compatible device using an HDMI cable. For details, refer to page 525. [Background ]/ [ Color(Playback)]...
Page 453: [Save To Custom Mode] L
15. Menu Guide [Setup] menu [Setting] [C1]/[C2]/[C3-1] to [C3-10] [Save to Custom You can register the currently set information of the camera. Mode] For details, refer to page 383. [C1]/[C2]/[C3-1] to [C3-10] Calls up registered Custom mode settings to the selected [Load Custom recording mode and overwrites the current settings with Mode]...
Page 454 15. Menu Guide [Setup] menu [Others] Sets the date and time. [Clock Set] For details, refer to page 56. Sets the time zone. Press 21 to select the time zone and then press to confirm. A Current time B Time difference from GMT (Greenwich [Time Zone]...
Page 455 15. Menu Guide [Setup] menu [Others] This set the language displayed on the screen. [Language] If you set a different language by mistake, select [ from the menu icons to set the desired language. [Firmware Update]/[Software info] You can check the firmware versions of the camera and lens.
Page 456: [Playback] Menu
15. Menu Guide [Playback] Menu Images recorded by another device may not be correctly played back or edited with the camera. How to Select an Image(s) in the [Playback] menu Follow the steps below when the image selection screen is displayed. When [Single] and [Multi] are not available, select an image in the same way as when [Single] is selected.
Page 457 15. Menu Guide : Default settings [Playback] [Playback Mode] [Normal Play]/[Picture Only]/[Video Only]/[HLG Only] [Playback Mode] Filters the type of images to play back. [ALL]/[Picture Only]/[Video Only]/[HLG Only] Selects image types and plays them back at regular intervals in order. [Start]: Starts slide show playback.
Page 458 15. Menu Guide [Playback] [Playback Mode] [ON]/ [OFF] Displays the point focused with AF. Enlarges the AF focus location when enlarging the image. [Magnify from AF If the image was recorded in [High Resolution Mode] or is Point] out of focus, the centre of the image is enlarged. This menu item can be registered to the Fn button.
Page 459 15. Menu Guide [Playback] [Process Image] Processes pictures taken in RAW format on the camera and saves them in JPEG format. In addition, RAW images [RAW Processing] recorded using [HLG Photo] can be saved in HLG format. For details, refer to page 359. You can save any 5 second period of pictures from a 6K/4K [6K/4K PHOTO Bulk burst file all at once.
Page 460 15. Menu Guide [Playback] [Add/Delete Info.] [Single]/[Multi]/[Cancel] You can set protection for images so that they will not be deleted by mistake. However, if you format the card, the protected images will also be deleted. For information about how to select images, refer to page [Protect] 456.
Page 461 15. Menu Guide [Playback] [Edit Image] [Single]/[Multi] Reduce the picture size of JPEG images and save them as different images to enable them to be easily used for web pages or sent as email attachments. For information about how to select images, refer to page 456.
Page 462 15. Menu Guide [Playback] [Edit Image] [Copy Direction] [Select Copy]/[Copy All in Folder]/[Copy All in Card] You can copy the images in one of the cards to the other card. Copied images will be saved in a new folder. [Select Copy]: Copies selected images. Select the folder containing the images to copy.
Page 463 15. Menu Guide [Playback] [Edit Image] You can set up to 100 images at once with [Select Copy]. The [Protect] setting is not copied. Copying may take a while. AVCHD videos cannot be copied. [Copy] When using the following combinations of cards, videos, (Continued) 6K/4K photos, and images recorded with [Post-Focus] cannot be copied:...
Page 464: Entering Characters
15. Menu Guide Entering Characters Follow the steps below when the character entry screen is displayed.  Enter characters. ≥Press 3421 to select characters and then press until the character to enter is displayed. (Repeat this) To repeatedly enter the same character, rotate to the right to move the entry position cursor.
Page 465: Wi-Fi/Bluetooth
Wi-Fi/Bluetooth This chapter explains the Wi-Fi and Bluetooth functions of the camera. ® ® Remote Operations from a Smartphone You can use the “LUMIX Sync” smartphone app for remote recording and image transfers. Transferring Images from This Camera You can transfer images to another device, such as a smartphone or PC, by operating the camera.
Page 466 16. Wi-Fi/Bluetooth Checking operation of the Wi-Fi and Bluetooth functions Operation of the Wi-Fi and Bluetooth functions can be confirmed with the ] /[ ] icon on the status LCD. Status LCD Display Monitor Display     A The Bluetooth function is set to on, or there is a connection B The Wi-Fi function is set to on, or there is a connection When image data is sent using a camera operation, [ ] on the status...
Page 467: Connecting To A Smartphone
16. Wi-Fi/Bluetooth Connecting to a Smartphone Connect with a smartphone which has the “Panasonic LUMIX Sync” (below: “LUMIX Sync”) smartphone app installed. Use “LUMIX Sync” for remote recording and image transfers. Flow of connecting a smartphone Install “LUMIX Sync” on your smartphone. (l 468) Connect to a network, and install “LUMIX Sync”...
Page 468 16. Wi-Fi/Bluetooth Installing “LUMIX Sync” “LUMIX Sync” is an application for smartphones provided by Panasonic. Supported OS Android™: Android 5 or higher iOS: iOS 11 or higher Connect the smartphone to a network. (Android) Select “Google Play™ Store”. (iOS) Select “App Store”.
Page 469 16. Wi-Fi/Bluetooth Connecting to a Smartphone (Bluetooth Connection) Follow a simple connection setup procedure (pairing) to connect to a smartphone that supports Bluetooth Low Energy. When pairing is set up, the camera also automatically connects to the smartphone via Wi-Fi. For the first-time connection, pairing settings are required.
Page 470 16. Wi-Fi/Bluetooth Operating the camera in accordance with the smartphone guide. Set the camera to Bluetooth pairing standby state. [Bluetooth] ≥ [Bluetooth] [SET] [Pairing] ≥The camera enters pairing standby state and the device name A is  displayed. On the smartphone, select the camera’s device name.
Page 471 16. Wi-Fi/Bluetooth The paired smartphone is registered as a paired device. During Bluetooth connection, [ ] is displayed in the recording screen. When the Bluetooth function is enabled, but a connection is not established with the smartphone, [ ] appears translucent. Up to 16 smartphones can be registered.
Page 472 16. Wi-Fi/Bluetooth Connecting to a Paired Smartphone Connect paired smartphones using the following procedure. Enable the Bluetooth function of the camera. [Bluetooth] [Bluetooth] [ON] On the smartphone, start up “LUMIX Sync”. If a message is displayed indicating that the smartphone is searching for cameras, close the message.
Page 473 16. Wi-Fi/Bluetooth Cancelling Pairing Cancel the pairing setting of the camera. [Bluetooth] [Bluetooth] [SET] [Delete] Select the smartphone for which to cancel the pairing. Also cancel the pairing setting on the smartphone. When [Reset] in the [Setup] ([Setting]) menu is used to reset the network settings, the information for registered devices is deleted.
Page 474 16. Wi-Fi/Bluetooth Set the camera to Wi-Fi connection standby status. [Wi-Fi] ≥ [Wi-Fi Function] [New Connection] [Remote Shooting & View]  ≥The SSID A of the camera is displayed on the screen. You can also perform the same operation by pressing the Fn button assigned with [Wi-Fi].
Page 475 16. Wi-Fi/Bluetooth When a device different than the one you want to connect to is displayed, the camera will automatically connect to that device if you select [Yes]. If there are other Wi-Fi connection devices nearby, we recommend using either QR code or manual password input to connect with password authentication.
Page 476 16. Wi-Fi/Bluetooth (iOS devices) If the Wi-Fi connection fails, follow the message displayed to allow connection to the camera. If you still cannot connect, select the SSID of the camera on the Wi-Fi setup screen of the smartphone to connect. If the SSID is not displayed, turn off and on the camera, then perform the Wi-Fi connection settings again.
Page 477 16. Wi-Fi/Bluetooth Connection Methods Other Than the Default Settings When connecting with [Via Network], or [WPS Connection] in [Direct], follow the steps below: Display the connection method setting screen for the camera. [Wi-Fi] [Wi-Fi Function] [New Connection] [Remote Shooting & View] Press [DISP.].
Page 478 16. Wi-Fi/Bluetooth Terminating the Wi-Fi Connection To end the Wi-Fi connection between the camera and smartphone, follow the steps below. Set the camera to recording mode. ≥Press the shutter button halfway. Terminate the Wi-Fi connection. [Wi-Fi] ≥ [Wi-Fi Function] [Yes] You can also perform the same operation by pressing the Fn button assigned with [Wi-Fi].
Page 479: Operating The Camera With A Smartphone
16. Wi-Fi/Bluetooth Operating the Camera with a Smartphone This explains the functions for operating the camera from a smartphone. Functions described in this document with the ( ) symbol require Bluetooth a smartphone that supports Bluetooth Low Energy. Home Screen When you start up “LUMIX Sync”, the home screen is displayed.
Page 480 16. Wi-Fi/Bluetooth [Remote shooting] You can use the smartphone to record from a remote location while viewing the live view images from the camera. Getting started: Connect the camera to a smartphone. (l 469, 473) On the smartphone, start up “LUMIX Sync”. Select [ ] ([Remote shooting]) in the home screen.
Page 481 16. Wi-Fi/Bluetooth Operation is possible on both the camera and the smartphone. [Camera] The camera’s dial settings, etc. cannot be changed with the smartphone. Operation is possible only on the smartphone. The camera’s dial settings, etc. can be changed with the smartphone.
Page 482 16. Wi-Fi/Bluetooth Bulb Recording The shutter can be kept open from the start to end of recording, which is useful for recording of starry skies or night scenery. Getting started: Set the camera to [M] mode. (l 193) Set the camera shutter speed to [B] (Bulb). (l 195) Touch [ ] to start recording (keep touching, without removing your finger).
Page 483 16. Wi-Fi/Bluetooth To use the [Shutter Remote Control] to cancel [Sleep Mode] on the camera, set [Bluetooth] in the [Setup] ([IN/OUT]) menu as follows, then connect via Bluetooth: – [Remote Wakeup]: [ON] (l 489) – [Auto Transfer]: [OFF] (l 486) The camera cannot be turned on by using [Shutter Remote Control].
Page 484 16. Wi-Fi/Bluetooth [Import images] Transfer an image stored on the card to the smartphone connected via Wi-Fi. Getting started: Connect the camera to a smartphone. (l 469, 473) On the smartphone, start up “LUMIX Sync”. Select [ ] ([Import images]) in the home screen. (iOS devices) When a message to confirm the change of destination is displayed, select [Join].
Page 485 16. Wi-Fi/Bluetooth You will need Android 7.0 or higher to save RAW pictures on an Android device. Depending on the smartphone or the OS, these may not be displayed correctly. When a video is played back, this has a small data size and is transmitted using “LUMIX Sync”, therefore its image quality will differ from that of the actual video recording.
Page 486 16. Wi-Fi/Bluetooth [Auto Transfer] Bluetooth You can automatically transfer recorded pictures to a smartphone as they are taken. Getting started: Connect the camera to a smartphone by Bluetooth. (l 469) Enable [Auto Transfer] on the camera. [Bluetooth] ≥ [Auto Transfer] [ON] If a confirmation screen is displayed on the camera asking you to terminate the...
Page 487 16. Wi-Fi/Bluetooth Record with the camera. This automatically sends the recorded pictures to the specified device as they are taken. ] is displayed in the recording screen of the camera while a file is being sent. To Stop the Automatic Transfer of Images [Bluetooth] [Auto Transfer] Select [OFF]...
Page 488 16. Wi-Fi/Bluetooth [Location Logging] Bluetooth The smartphone sends its location information to the camera via Bluetooth, and the camera performs recording while writing the acquired location information. Getting started: Enable the GPS function on the smartphone. Connect the camera to a smartphone by Bluetooth. (l 469) Enable [Location Logging] on the camera.
Page 489 16. Wi-Fi/Bluetooth [Remote Wakeup] Bluetooth Even when the camera is turned off, the smartphone can be used to start the camera and record images, or check the recorded images. Getting started: Connect to a smartphone using Bluetooth. (l 469) Enable [Remote Wakeup] on the camera. [Bluetooth] [Remote Wakeup] [ON]...
Page 490 16. Wi-Fi/Bluetooth [Auto Clock Set] Bluetooth Synchronise the clock and the time zone setting of the camera with those of a smartphone. Getting started: Connect the camera to a smartphone by Bluetooth. (l 469) Enable [Auto Clock Set] on the camera.
Page 491 16. Wi-Fi/Bluetooth [Camera settings copy] Bluetooth This saves the camera’s settings information to the smartphone. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. Getting started: Connect the camera to a smartphone by Bluetooth. (l 469) Select [ ] ([Camera settings copy]) in the “LUMIX Sync”...
Page 492: Sending Images From The Camera
16. Wi-Fi/Bluetooth Sending Images from the Camera Operate the camera to send recorded images to a device connected by Wi-Fi. Operation flow Select the sending method. Select the sending method from the [Send Images While Recording] and [Send Images Stored in the Camera] camera menus.
Page 493 16. Wi-Fi/Bluetooth Detailed information about connection methods for each destination device is described on pages to 507. Refer to the following pages for the steps common to all devices. – Wi-Fi connections: [Via Network] (l 508)/[Direct] (l 512) – Image send settings (l 515) –...
Page 494 16. Wi-Fi/Bluetooth Images That Can be Sent Images that can be sent differ depending on the destination device. Images that can be sent Destination device [Send Images While [Send Images Stored in Recording] the Camera] [Smartphone] l 496) JPEG/RAW JPEG/RAW/MP4 JPEG/RAW/MP4/ MOV/AVCHD/ [PC] (l 499)
Page 495 16. Wi-Fi/Bluetooth Fn Button Assigned with [Wi-Fi] You can perform the following operations by pressing the Fn button assigned with [Wi- Fi] after connecting to Wi-Fi. For information on Fn buttons, refer to page 367. [Terminate the Terminates the Wi-Fi connection. Connection] Terminates the Wi-Fi connection, and allows you to [Change the Destination]...
Page 496 16. Wi-Fi/Bluetooth [Smartphone] Transfer recorded images to a smartphone connected using Wi-Fi. Getting started: Install “LUMIX Sync” on your smartphone. (l 468) Select the method for sending the images on the camera. [Wi-Fi] ≥ [Wi-Fi Function] [New Connection] [Send Images While Recording]/[Send Images Stored in the Camera] Set the destination to...
Page 497 16. Wi-Fi/Bluetooth When [Send Images While Recording] is selected: Take pictures. This automatically sends the recorded pictures to the specified device as they are taken. ] is displayed in the recording screen of the camera while a file is being sent.
Page 498 16. Wi-Fi/Bluetooth Sending Images on the Camera to a Smartphone with Simple Operations You can transfer pictures to a smartphone connected by Bluetooth just by pressing the Fn button during playback. You can also use the menu to connect easily. Use the Fn button registered with [Send Image (Smartphone)] to operate.
Page 499 16. Wi-Fi/Bluetooth Using the menu to transfer easily [Bluetooth] [Send Image (Smartphone)] Settings: [Single Select]/[Multi Select] If [Single Select], press 21 to select the image and then press execute. If [Multi Select], use the same operation as with “Send multiple images”. [PC] Send recorded images to the PC connected with Wi-Fi.
Page 500 16. Wi-Fi/Bluetooth Create a PC account name (up to 254 characters) and password (up to 32 characters) consisting of alphanumeric characters. A destination folder may not be created if the account name includes non- alphanumeric characters. When the computer name (NetBIOS name for Mac) contains a space (blank character), etc., it may not be recognised.
Page 501 16. Wi-Fi/Bluetooth Enter the computer name of the PC name you want to connect to (for Mac, the NetBIOS name). For information on how to enter characters, refer to page 464. Select a folder for storing images. Folders sorted by sent date will be created in the selected folder, and images will be saved there.
Page 502 16. Wi-Fi/Bluetooth If the screen for a user account and password entry appears, enter the one you set on your PC. When the firewall of the OS, security software, etc. is enabled, connecting to the PC may not be possible. [Printer] You can send images to a PictBridge (wireless LAN) ¢...
Page 503 16. Wi-Fi/Bluetooth Connect the camera to a printer by Wi-Fi. ≥Select [Via Network] (l 508) or [Direct] (l 512), and then connect. Select the destination printer. Select and print images. The procedure for selecting images is the same as the one for when the USB connection cable is connected.
Page 504 16. Wi-Fi/Bluetooth [Web service] You can use “LUMIX CLUB” to upload recorded images to web services such as social networking sites. Getting started: Register with “LUMIX CLUB”. (l 518) Before sending images to a service, register that web service. (l 520) Select the method for sending images on the camera.
Page 505 If image sending fails, a report email outlining the failure will be sent to the email address registered in the “LUMIX CLUB”. Panasonic assumes no responsibility for any damages resulting from the leakage, loss, etc. of images uploaded on web services.
Page 506 16. Wi-Fi/Bluetooth [Cloud Sync. Service] This camera can automatically transfer recorded images to a cloud sync service via “LUMIX CLUB” to send them to a PC or smartphone. To use [Cloud Sync. Service] (As of August 2019) You need to register to the “LUMIX CLUB” (l 518) and set up cloud synchronisation to send images to a cloud folder.
Page 507 16. Wi-Fi/Bluetooth Connect to the cloud sync service. ≥Select [Via Network] and then connect. (l 508) Check the send settings and then press To change the send settings of images, press [DISP.]. (l 515) When [Send Images While Recording] is selected: Take pictures.
Page 508: Wi-Fi Connections
16. Wi-Fi/Bluetooth Wi-Fi Connections When [New Connection] has been selected in [Wi-Fi Function] in [Wi-Fi] of the [Setup] ([IN/OUT]) menu, select the connection method from either [Via Network] or [Direct] to connect. On the other hand, when you use [Select a destination from History] or [Select a destination from Favorite], the camera connects to the selected device with the previously-used settings.
Page 509 16. Wi-Fi/Bluetooth Press the WPS button on the wireless access [WPS (Push-Button)] (l 509) point to set up a connection. Enter a PIN code into the wireless access point to [WPS (PIN code)] (l 510) set up a connection. Searches for a wireless access point to use, and [From List] (l 510) connects to this.
Page 510 16. Wi-Fi/Bluetooth [WPS (PIN code)] Enter a PIN code into the wireless access point to set up a connection. On the camera screen, select the wireless access point you are connecting to. Enter the PIN code displayed on the camera screen into the wireless access point.
Page 511 16. Wi-Fi/Bluetooth Connecting by Manual Input Check the SSID, network authentication, encryption, and encryption key of the wireless access point you are using. In the screen in Step of “[From List]”, select [Manual Input]. (l 510) Enter the SSID of the wireless access point you are connecting to, and then select [Set].
Page 512 16. Wi-Fi/Bluetooth [Direct] Directly connect the camera and the destination device. Select the method for connecting with the destination device. Press the WPS button on the destination [WPS (Push- device to connect. Button)] On the camera, press [DISP.] to extend [WPS the connection wait time.
Page 513 16. Wi-Fi/Bluetooth Connect to Wi-Fi Using Previously Saved Settings Use the Wi-Fi connection history to connect using the same settings as previously. Display the Wi-Fi connection history. [Wi-Fi] ≥ [Wi-Fi Function] [Select a destination from History]/[Select a destination from Favorite] Select the History item to connect to.
Page 514 16. Wi-Fi/Bluetooth Editing Items Registered in Favourite Display items registered to Favourite. [Wi-Fi] [Wi-Fi Function] [Select a destination from Favorite] Select the History item to edit in Favourite and then press 1. [Remove from Favorite] — [Change the Order in Specify the destination location of the desired Favorite] item to change the display order.
Page 515: Send Settings And Selecting Images
16. Wi-Fi/Bluetooth Send Settings and Selecting Images Image Send Settings Set the size, file format, and other items for sending the image to the destination device. After Wi-Fi connection, the send settings confirmation screen will be displayed, so press [DISP.]. Change the send settings.
Page 516 16. Wi-Fi/Bluetooth Selecting Images When sending by [Send Images Stored in the Camera], select the images using the following procedure. Select [Single Select] or [Multi Select]. Select the image. [Single Select] setting Press 21 to select an image. Press [Multi Select] setting Press 3421 to select an image and then press .
Page 517: [Wi-Fi Setup] Menu
16. Wi-Fi/Bluetooth [Wi-Fi Setup] Menu This configures the settings required for the Wi-Fi function. The settings cannot be changed when connected to Wi-Fi. Displaying the [Wi-Fi Setup] menu. [Wi-Fi] [Wi-Fi Setup] ≥ This sets either the camera or the smartphone as the [Priority of Remote priority control device to be used during remote Device]...
Page 518 [Network Address] camera. “LUMIX CLUB” Refer to the “LUMIX CLUB” site for details. https://lumixclub.panasonic.net/eng/c/ The service may be suspended due to regular maintenance or unexpected troubles, and the service contents may be changed or added, without prior notice to the users.
Page 519 16. Wi-Fi/Bluetooth Acquire a New Login ID from the Camera From the camera menu, acquire a “LUMIX CLUB” login ID. Follow the menu path. [Wi-Fi] [Wi-Fi Setup] [LUMIX CLUB] [Set/Add Account] [New account] Connect to the network. Proceed to the next page by selecting [Next].
Page 520 Register a Web Service with “LUMIX CLUB” Confirm web services supported by “LUMIX CLUB” in “FAQ/Contact us” at the following site: https://lumixclub.panasonic.net/eng/c/lumix_faqs/ Getting started: Make sure that you have created an account on the web service you want to use, and have the login information available.
Page 521 16. Wi-Fi/Bluetooth Enter the login ID or password. For information on how to enter characters, refer to page 464. Select [Exit]. Checking the “LUMIX CLUB” Terms of Use Check the details if the terms of use have been updated, for example. [Wi-Fi] [Wi-Fi Setup] [LUMIX CLUB]...
Page 522: Connecting To Other Devices
Connecting to Other Devices This chapter describes connections with other devices, such as TVs and PCs. Connect using either the [HDMI] socket or the USB port on the camera. Refer to the sections below for more details about connections. [HDMI] socket Connect the camera and TV with a commercially available HDMI cable.
Page 523 17. Connecting to Other Devices Plug in/out straight holding onto the plug. (Inserting these at an angle may cause deformation or malfunction) Do not use any other USB connection cables except the supplied USB connection cables (C–C and A–C). Do not connect the cable to the wrong terminals. This may cause a malfunction.
Page 524: Viewing On A Tv
17. Connecting to Other Devices Viewing on a TV You can connect the camera to a TV to view recorded pictures and videos on the TV. Getting started: Turn off the camera and TV. Connect the camera and TV with a commercially available HDMI cable.
Page 525 Using VIERA Link VIERA Link (HDAVI Control™) is a function that allows you to use your remote control for the Panasonic TV for easy operations when the camera has been connected to a VIERA Link compatible device using an HDMI cable for automatic linked operations.
Page 526 Furthermore, when the TV power is in the standby state, it turns on automatically. (When “Power on link” on the TV is set to “Set”) VIERA Link is a unique Panasonic function built on an HDMI control function using the standard HDMI CEC (Consumer Electronics Control) specification.
Page 527: Importing Images To A Pc
17. Connecting to Other Devices Importing Images to a PC If you connect the camera to a PC, you can copy the recorded images to the PC. When using Windows, you can also copy using the “PHOTOfunSTUDIO” software for LUMIX. You can also use software to perform operations such as organising and correcting recorded images, processing RAW images, and editing videos.
Page 528 17. Connecting to Other Devices Getting started: Turn on the camera and PC. Connect the camera and PC with the USB connection cable (C–C or A–C). (l 522) Press 34 to select [PC(Storage)] and then press ≥Windows: A drive (“LUMIX”) is displayed in [This PC]. A drive (“LUMIX”) is displayed on the desktop.
Page 529: Installing Software
17. Connecting to Other Devices Copying Images to a PC Using “ PHOTOfunSTUDIO” Getting started: Turn on the camera and PC. Install “PHOTOfunSTUDIO” on PC. (l 529) Connect the camera and PC with the USB connection cable (C–C or A–C). (l 522) Press 34 to select [PC(Storage)] and then press A message about charging may be displayed.
Page 530 You can also perform operations such as writing images to a DVD, correcting images, and editing videos. Check the following site and then download and install the software: https://panasonic.jp/support/global/cs/soft/download/d_pfs101pe.html (English only) Download expiration: September 2024 Operating environment Windows 10 (32-bit/64-bit) Windows 8.1 (32-bit/64-bit)
Page 531 17. Connecting to Other Devices SILKYPIX Developer Studio SE This software processes and edits RAW images. Edited images can be saved in a format (JPEG, TIFF, etc.) that can be displayed on a PC. Check the following site and then download and install the software: http://www.isl.co.jp/SILKYPIX/english/p/ Operating environment Windows 10 (64-bit recommended)
Page 532: Storing On A Recorder
17. Connecting to Other Devices Storing on a Recorder By connecting the camera to a Panasonic Blu-ray disc recorder or DVD recorder, you can store the pictures and videos. Getting started: Turn on the camera and recorder. Insert a card into card slot 1.
Page 533: Tethered Recording
This software is for controlling the camera from a PC. It allows you to change various settings and to record remotely and then save the images to the PC. Check the following site and then download and install the software: https://panasonic.jp/support/global/cs/soft/download/d_lumixtether.html (English only) Operating environment Windows Windows 10, Windows 8.1, Windows 7...
Page 534: Operating The Camera From A Pc
17. Connecting to Other Devices Operating the Camera from a PC To output via HDMI to an external monitor or TV, connect the camera with an HDMI cable. (l 524) Getting started: Turn on the camera and PC. Install “LUMIX Tether” on PC. Connect the camera and PC with the USB connection cable (C–C or A–C).
Page 535: Printing
17. Connecting to Other Devices Printing If you connect the camera to a printer that supports PictBridge, you can select pictures on the camera’s monitor and then print them. Getting started: Turn on the camera and printer. Set the print quality and other settings on the printer. Display the playback screen.
Page 536 17. Connecting to Other Devices Press 21 to select a picture PictBridge and then press ≥To print multiple pictures, press 3, set the picture selection method, and then select pictures. Selects the picture to print. Press 3421 to select a picture and then press [Multi Select] To cancel the setting, press again.
Page 537 17. Connecting to Other Devices Setting Items (Print Settings) [Print start] Starts printing. Sets printing with date. [Print with Date] If the printer does not support printing with date, the date cannot be printed. [Num.of prints] Sets the number of prints to be printed (up to 999). [Paper Size] Sets the paper size.
Page 538 17. Connecting to Other Devices If [USB Mode] is set to [PictBridge(PTP)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the printer without the [USB Mode] selection screen being displayed. (l 449) Take care not to turn off the camera while printing is in progress. When connecting with the printer is not possible, set [USB Power Supply] to [OFF] and then try connecting again.
Page 539: Materials
Materials Using Optional Accessories For information on the external flash, refer to page 228. For information on the external microphone, refer to page 340. For information on the XLR Microphone Adaptor, refer to page 343. Some optional accessories may not be available in some countries. Battery Grip (Optional) When mounted on the camera, the Battery Grip (DMW-BGS1: optional) improves ease of operation...
Page 540: Shutter Remote Control (Optional)
18. Materials Getting started: Turn the camera off, and remove the cover for the battery grip connector. Attach the Battery Grip to the camera. Turn on the camera. Set the battery use priority. [Battery Use Priority] [BODY] The battery in the camera is used first. [BG] The battery in the Battery Grip is used first.
Page 541: Ac Adaptor (Optional)/Dc Coupler (Optional)
[Video Record] is registered in the default setting. Select [Video Rec. Button (Remote)] Register functions using the same operations as [Fn Button Set]. (l 367) Always use a genuine Panasonic Shutter Remote Control (DMW-RS2: optional). Refer to the operating instructions for the Shutter Remote Control for details.
Page 542: Monitor/Viewfinder Displays
18. Materials Monitor/Viewfinder Displays The screen is an monitor display example of when [LVF/Monitor Disp. Set] is set to Recording Screen  FINE  S35mm MINI MINI    24m59s 24m59s  HLG photo (l 226) ‰ LUT View Assist (l 310) Flash mode (l 231) Œ...
Page 543 18. Materials Flicker Decrease (Photo) Focus Bracket (l 164) FLICKER (l 407) AF Lock (l 199) High Resolution mode Focus Peaking (l 402) (l 222) FULL Image area of video Overlay indication (l 437) S35mm (l 266) LUT View Assist (l 310) HLG View Assist (l 314) Loop recording (l 320) AF mode (l 103)
Page 544 18. Materials Card access indication (turns red) (l 242) Time stamp recording 2019.12. 1 Card slot (l 48)/Double l 417) 10:00:00 card slot function (l 92) Focus (turns green) (l 61)/ No card Recording state (turns red) ¥ Card full (l 223, 242) Number of still images that Focus (in low light AF...
Page 545 18. Materials Exposure compensation (l 251) Temperature rise warning ISO sensitivity (l 251) icon (l 557) Sound recording level Fan error warning icon adjustment (l 251) (l 567) Touch Tab (l 425) Fn button (l 375) Touch Zoom (l 129) Touch AF, Touch Shutter (l 84) Exposure compensation...
Page 546 18. Materials Control Panel 1/60 F4.0    FINE  Recording mode (l 63) Drive mode (l 131)/ 1/60 Shutter speed (l 61) Post-Focus (l 166)/ High Resolution mode F4.0 Aperture value (l 61) (l 222) Battery indication (l 44) Power supply (l 43) Focus mode (l 96, 123) Battery indication (battery...
Page 547 18. Materials Photo Style (l 210) White balance (l 204) i.Dynamic Range (l 399) Metering mode (l 185) Card slot (l 48)/Double card slot function (l 92) No card Card full Number of still images that can be taken (l 582) Number of pictures that can be taken continuously (l 134)
Page 548 18. Materials Control Panel ([ ] Mode) SHUTTER IRIS  1/60 F4.0  00:00:00:00 FULL  420/8-L FHD 50.00 p  PHOTO STYLE  AUTO Wi-Fi/Bluetooth connection state (l 466) Frame rate (l 255)/ Fan operating mode (l 442) Variable frame rate (l 297) Battery indication (l 44) SHUTTER Shutter speed (l 61)
Page 549 18. Materials ISO sensitivity (l 200)/ Dual Native ISO setting AUTO (l 203) Photo Style (l 210)/ LUT View Assist (l 310)/ HLG View Assist (l 314) White balance (l 204)
Page 550: Playback Screen
18. Materials Playback Screen 2019.12.1 10:00 100-0001 1/999   8m30s    FINE ± Playback mode (l 457) 100-0001 Folder/file number (l 528) Recording date and time Image number/Total 2019.12. 1 1/999 (l 56) 10:00 number of images Card slot (l 48) Number of group images/ Ü...
Page 551 18. Materials Playback (video) (l 349) Group images (l 356) Time code (l 268) XLR microphone adaptor 96kHz/24bit setting (l 343) Recording file format (l 255)/ 420/8-L Recording quality (l 255) 50.00p Frame rate (l 255)/ 25/50.00p Variable frame rate (l 297) FULL Image area of video S35mm...
Page 552 18. Materials Detailed information display Photo Style display FINE 5500 STD. F4.0 F4.0 2019.12. 1 10:00 2019.12. 1 10:00 100-0001 100-0001      White balance display 1 Card slot (l 48) 2 Recording date and time (l 56) 3 Folder/file number (l 528) 5500K 4 Recording information (basic)
Page 553: Message Displays
18. Materials Message Displays Meanings of main messages displayed on the camera screen, and response methods. Card [Memory Card Error]/[Format this card?] It is a format that cannot be used with the camera. Either insert another card, or back up any necessary data before formatting. (l 50) [Memory Card Error]/[This memory card cannot be used] Use a card compatible with the camera.
Page 554 [This battery cannot be used] Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic battery is used, contact the dealer. If the terminal of the battery is dirty, remove the dirt and dust from the terminal.
Page 555 18. Materials Wi-Fi [Failed to connect wireless access point]/[Connection failed]/[No destination found] The wireless access point information set on the camera is wrong. Check the authentication type and encryption key. (l 511) Radio waves from other devices may block the connection to a wireless access point.
Page 556 18. Materials [Please turn camera off and then on again]/[System Error] Turn off and on the camera. If the message is displayed even when doing this several times, contact the dealer. [The fan is not functioning correctly.] The fan has stopped. Turn off and on the camera. If the fan does not work after turning the camera off and then on again, consult the dealer.
Page 557: Troubleshooting
18. Materials Troubleshooting First, try out the following procedures (l to 568). If the problem is not resolved, it may be improved by selecting [Reset] (l 80) on the [Setup] ([Setting]) menu. Power, Battery The camera turns off automatically. [Power Save Mode] is enabled. (l 46) The battery becomes flat too quickly.
Page 558 18. Materials Cannot record images. The shutter will not operate immediately when the shutter button is pressed. If [Focus/Shutter Priority] is set to [FOCUS], then recording will not take place until focus is achieved. (l 421) The recorded image is whitish. Images may look whitish when the lens or image sensor gets dirty with fingerprints or similar.
Page 559 18. Materials The recorded image looks rough. Noise appears on the picture. Try the following: – Reduce the ISO sensitivity. (l 200) – Increase [Noise Reduction] of [Photo Style] to the positive direction, or adjust each item other than [Noise Reduction] to the negative direction. (l 213) –...
Page 560 18. Materials Stripes appear in high ISO sensitivity. Stripes may appear in high ISO sensitivity or depending on the lens you use. Decrease the ISO sensitivity. (l 200) The brightness or colouring of the recorded image is different from the actual scene. When recording under lighting such as fluorescent or LED lighting, increasing the shutter speed may introduce slight changes to brightness or colouring.
Page 561 18. Materials Video Cannot record videos. If you change the [System Frequency], you may no longer be able to record video to the same card. Try again after either returning the [System Frequency] to the original setting or inserting another card. When using a large capacity card, you may not be able to record for a while after turning on the camera.
Page 562 18. Materials Playback Cannot play back. There are no recorded pictures. Folders and images processed on a PC cannot be played on the camera. We recommend using the software “PHOTOfunSTUDIO” to write images from the PC to the card. Some images are not displayed when the [Playback Mode] is set. Set to [Normal Play].
Page 563 18. Materials Cannot switch between the monitor and viewfinder even when [LVF] is pressed. When the camera is connected to a PC or printer, it is not possible to switch to the viewfinder display. Unevenly bright parts or irregular colours appear on the viewfinder. The viewfinder of the camera is built with OLED components.
Page 564 18. Materials Wi-Fi Function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. General tips for using a Wi-Fi connection Use within the communication range of the device to be connected. Usage near devices that utilise the 2.4 GHz frequency such as microwave ovens and cordless telephones may result in the radio wave being lost.
Page 565 18. Materials When trying to connect to a PC by Wi-Fi, this does not recognise the user name and password, and connection is not possible. Depending on the version of the OS, there are two types of user account (local account/Microsoft account).
Page 566 18. Materials I have forgotten the password for the Wi-Fi. In the [Setup] ([Setting]) menu, [Reset], reset network settings. (l 80) However, all information set in [Wi-Fi Setup] and [Bluetooth] will also be reset. (With the exception of [LUMIX CLUB]) TV, PC, Printer No image on the TV.
Page 567 18. Materials Cannot print when the camera is connected to a printer. Pictures cannot be printed using a printer that does not support PictBridge. Set the camera’s [USB Mode] to [PictBridge(PTP)]. (l 449) The ends of the images are cut at printing. If the printer has trimming or borderless printing functions, cancel these settings before printing.
Page 568 18. Materials The camera makes a noise when it is turned on. This is the noise of the dust reduction function working (l 571); it is not a malfunction. There is rattling noise from the lens when the camera is turned on or off, or when the camera is swung.
Page 569: Cautions For Use
18. Materials Cautions for Use The camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.
Page 570 18. Materials Do not spray the camera with insecticides or volatile chemicals. If the camera is sprayed with such chemicals, the body of the camera may be damaged and the surface finish may peel off. Do not keep products made of rubber, PVC or similar materials in contact with the camera for a long period of time.
Page 571 18. Materials Cleaning Before cleaning the camera, remove the battery or the DC Coupler, and disconnect the power plug from the electrical outlet. Then wipe the camera with a dry, soft cloth. When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, and then with a dry cloth.
Page 572 Do not use any objects except a blower brush to clean the image sensor. If you cannot remove the dirt or dust with the blower, consult the dealer or Panasonic. Cleaning the Viewfinder If the viewfinder is dirty, then remove the eye cup and clean.
Page 573 18. Materials Monitor/Viewfinder Do not push hard on the monitor. This may cause irregular colouration or malfunction. Extremely high precision technology is employed to produce the monitor/viewfinder screen. However there may be some dark or bright spots, or spots that light constantly (red, blue, or green) on the screen.
Page 574 18. Materials Charger, AC Adaptor The [CHARGE] light may blink under the influence of static electricity or electromagnetic wave, depending on the charging environment. This phenomenon has no effects on charging. If you use the battery charger near a radio, the radio reception may be disturbed.
Page 575 Please note in advance that Panasonic is not liable in any way for any direct or indirect damage from the alteration or vanishing of information or personal information.
Page 576 Recorded data may be damaged or lost if the camera breaks down due to inappropriate handling. Panasonic will not be liable for any damage caused due to loss of recorded data. Tripod Make sure the tripod is stable when the camera is attached to it.
Page 577 There is the risk that the camera violates the radio wave regulations if used in countries other than those where it is sold, and Panasonic takes no responsibility for any violations. There is the risk that data sent and received via radio waves may be...
Page 578 18. Materials Do not connect to the wireless network you are not authorised to use When the camera utilises its wireless LAN function, wireless networks will be searched automatically. When this happens, wireless networks that you are not authorised to use ¢...
Page 579: Number Of Pictures That Can Be Taken And Available Recording Time With The Battery
The number of pictures that can be taken is according to the CIPA (Camera & Imaging Products Association) standards. Using a Panasonic SDHC memory card. Using the interchangeable lens (S-R24105). The values listed are approximate.
Page 580 18. Materials Recording Videos (When Using the Monitor) Continuous available Actual available recording time (minutes) recording time (minutes) [Rec. File [Rec Quality] Format] [Image Area of Video] [Image Area of Video] [FULL] [S35mm] [FULL] [S35mm] [FHD/17M/60i] [AVCHD] [FHD/17M/50i] [4K/10bit/100M/60p] — —...
Page 581 18. Materials Playback (When Using the Monitor) Playback time (minutes) The number of pictures that can be taken and the available recording time vary depending on the surrounding environment and the usage conditions. For example, these will reduce in the following case: –...
Page 582: Number Of Still Images That Can Be Taken And Video
18. Materials Number of Still Images That Can Be Taken and Video Recording Time with Cards Listed below are the numbers of pictures and the time lengths of videos that can be recorded on a card. The values listed are approximate. Number of Still Images That Can Be Taken [Aspect Ratio]: [3:2];...
Page 583 18. Materials Video Recording Time “h” is an abbreviation for hour, “m” for minute and “s” for second. Video recording time is the total time of all the videos which have been recorded. [Rec. File Format]: [AVCHD] [System Frequency]: [59.94Hz (NTSC)] Card capacity [Rec Quality] 32 GB...
Page 584 18. Materials [System Frequency]: [50.00Hz (PAL)] Card capacity [Rec Quality] 32 GB 64 GB 128 GB [4K/10bit/100M/50p]/[4K/8bit/100M/25p] 41m00s 1h25m 2h45m [4K/10bit/72M/25p] 58m00s 1h55m 3h55m [FHD/8bit/28M/50p] 2h25m 4h55m 9h45m [FHD/8bit/20M/25p] 3h15m 6h30m 13h00m [Rec. File Format]: [MOV] [System Frequency]: [59.94Hz (NTSC)] Card capacity [Rec Quality] 32 GB...
Page 585 18. Materials [System Frequency]: [50.00Hz (PAL)] Card capacity [Rec Quality] 32 GB 64 GB 128 GB [4K-A/25p/422/10-I]/[C4K/25p/422/10-I]/ 10m00s 21m00s 42m00s [4K/25p/422/10-I] [5.9K/25p/420/10-L]/[5.4K/25p/420/10-L]/ [4K-A/50p/420/10-L]/[C4K/50p/420/10-L]/ 20m00s 42m00s 1h20m [4K/50p/420/10-L]/[FHD/50p/422/10-I]/ [FHD/25p/422/10-I] [4K-A/50p/420/8-L]/[4K-A/25p/422/10-L]/ [C4K/50p/420/8-L]/[C4K/25p/422/10-L]/ 27m00s 56m00s 1h50m [4K/50p/420/8-L]/[4K/25p/422/10-L]/ [FHD/100p/420/10-L] [4K-A/25p/420/8-L]/[C4K/25p/420/8-L]/ [4K/25p/420/8-L]/[FHD/50p/422/10-L]/ 41m00s 1h25m 2h45m [FHD/50p/420/8-L]/[FHD/50i/422/10-I]/ [FHD/25p/422/10-L]/[FHD/25p/420/8-L] [FHD/50i/422/10-L]...
Page 586 18. Materials Depending on the recording conditions and the type of card, number of still images that can be taken, video recording time vary. [9999+] is displayed on the recording screen and status LCD if the remaining number of still images that can be taken is 10000 or more. The continuous recordable time for videos is displayed on the screen.
Page 587: List Of Default Settings/Custom Saving/Settings Available
18. Materials List of Default Settings/Custom Saving/ Settings Available for Copying : Using [Reset], the function to return to default settings : Using [Save to Custom Mode], the function to save settings details in the Custom mode : Using [Save/Restore Camera Setting], the function to copy settings details Menu Default setting [Photo]:...
Page 588 18. Materials Menu Default setting [Photo]: [Focus] [AF Custom Setting(Photo)] [Set 1] [AF Assist Light] [ON] [ON]/[OFF] [ON] [Focus Peaking] [SET] — [1-Area AF Moving Speed] [FAST] [Photo]: [Flash] [Flash Mode] [‰] [Firing Mode] [TTL] [Flash Adjust.] [±0 EV] [Flash Synchro] [1ST] [Manual Flash Adjust.] [1/1]...
Page 589 18. Materials Menu Default setting [Burst Shot 1 Setting] [Burst Shot 2 Setting] [Shutter Type] [MECH.] [Shutter Delay] [OFF] [Ex. Tele Conv.] [OFF] [Mode] [Time Lapse Shot] [Shooting Interval Setting] [ON] [Start Time] [Now] [Time Lapse/ Animation] [Image Count] [Shooting Interval] [1m00s] [Exposure Leveling] [OFF]...
Page 590 18. Materials Menu Default setting [Flicker Decrease (Video)] [OFF] [Master Pedestal Level] [SS/Gain Operation] [SEC/ISO] [i.Dynamic Range] [OFF] [Vignetting Comp.] [ON] [Diffraction Compensation] [OFF] [Filter Effect] [OFF] [Filter Settings] [Simultaneous Record w/o [OFF] Filter] [Video]: [Image Format] When [System Frequency] is set to [59.94Hz (NTSC)] or [50.00Hz (PAL)]: [MP4] [Rec.
Page 591 18. Materials Menu Default setting [Time Code Display] [OFF] [Count Up] [REC RUN] [Time Code Value] — [Time Code] [Time Code Mode] [DF] [HDMI Time Code Output] [OFF] [External TC Setting] — [Luminance Level] [16-255] [Video]: [Focus] [ON]/[OFF] [OFF] [AF Custom Setting(Video)] [SET] —...
Page 592 18. Materials Menu Default setting [Video]: [Others (Video)] [Silent Mode] [OFF] [Operation Mode] [Body(B.I.S.) / Lens(O.I.S.)] [When to Activate] [HALF-SHUTTER] [Image Stabilizer] [E-Stabilization (Video)] [OFF] [Boost I.S. (Video)] [OFF] [Anamorphic (Video)] [OFF] [Lens Information] [Lens1] [Start] — [Focus Pull Setting] —...
Page 593 18. Materials Menu Default setting [Color Space] [sRGB] [Exposure Comp. Reset] [OFF] [Auto Exposure in P/A/S/M] [ON] [F/SS/ISO/Exposure Comp.] [White Balance] [CreativeVideo Combined Set.] [Photo Style] [Metering Mode] [AF Mode] [Custom]: [Focus/Shutter] [AFS] [FOCUS] [Focus/Shutter Priority] [AFC] [BALANCE] [Focus Switching for Vert / Hor] [OFF] [AF/AE Lock Hold] [OFF]...
Page 594 18. Materials Menu Default setting [Pinpoint AF Time] [MID] [Pinpoint AF Setting] [Pinpoint AF Display] [PIP] [Keep Enlarged Display] [OFF] [AF-Point Scope Setting] [PIP Display] [PIP] [Shutter AF] [ON] [Half-Press Shutter] [OFF] [Quick AF] [OFF] [Eye Sensor AF] [OFF] [Looped Focus Frame] [OFF] [AFC Start Point (225-Area)] [OFF]...
Page 595 18. Materials Menu Default setting [Assign Dial (F/SS)] [SET1] [Rotation (F/SS)] [Control Dial Assignment] [ [Exposure Comp.] [OFF] [Dial Set.] [Dial Operation Switch — Setup] [Rotation (Menu Operation)] [Joystick Setting] [D.FOCUS Movement] [Illuminated Button] [ON2] [Video Rec. Button (Remote)] [Video Record] [Custom]: [Monitor / Display (Photo)] [Duration Time (photo)]...
Page 596 18. Materials Menu Default setting [Expo.Meter] [OFF] [Focal Length] [ON] [Blinking Highlights] [OFF] [ON]/[OFF] [OFF] [Sheer Overlay] [SET] — [I.S. Status Scope] [OFF] [Level Gauge] [ON] [Luminance Spot Meter] [OFF] [Framing Outline] [OFF] [Control Panel] [ON] [Show/Hide Monitor Layout] [Black Screen] [ON] [Custom]: [Monitor / Display (Video)]...
Page 597 18. Materials Menu Default setting [Custom]: [IN/OUT] [Info Display] [ON] [Down Convert] [AUTO] [HDMI Rec Output] [HDMI Recording Control] [OFF] [Sound Down Convert] [OFF] [Sound Output (HDMI)] [ON] [Fan Mode] [AUTO1] [Tally Lamp] [FRONT/REAR] [Custom]: [Lens / Others] [Lens Focus Resume] [OFF] [NON-LINEAR]/[LINEAR] [NON-LINEAR]...
Page 598 18. Materials Menu Default setting [Monitor Frame Rate] [60fps] [LVF Frame Rate] [60fps] [Monitor Settings]/[Viewfinder] — [Monitor Backlight]/[LVF Luminance] [AUTO] [Remaining Battery Level] [Character/Background Color] [Status-LCD] [Backlight] [Display While Power Off] [ON] [Sensitivity] [HIGH] [Eye Sensor] [LVF/Monitor Switch] [LVF/MON AUTO] [Adjust.] —...
Page 599 18. Materials Menu Default setting [HDMI Mode (Playback)] [AUTO] [LUT View Assist (HDMI)] [OFF] [HLG View Assist (HDMI)] [AUTO] [TV Connection] [VIERA Link (CEC)] [OFF] [Background Color(Playback)] [Photo Luminance Level] [16-255] [Card Access Light] [ON] [Setup]: [Setting] [Save to Custom Mode] —...
Page 600 18. Materials Menu Default setting [Firmware Version] — [Online Manual] — [My Menu]: [Edit My Menu] [Add] — [Sorting] — [Delete] — [Display from My Menu] [OFF] [Playback]: [Playback Mode] [Playback Mode] [Normal Play] [Slide Show] — [Rotate Disp.] [ON] [Picture Sort] [DATE/TIME] [Magnify from AF Point]...
Page 601: List Of Functions That Can Be Set In Each Recording Mode
18. Materials List of Functions That Can Be Set in Each Recording Mode Menu [Photo]: [Image Quality] [Photo Style] [Metering Mode] [Aspect Ratio] [Picture Quality] [Picture Size] [HLG Photo] [Start] [Simul Record Normal Shot] [High Resolution Mode] [Shutter Delay] [Motion Blur Processing] [Long Exposure NR] [Dual Native ISO Setting] [ISO Auto Lower Limit...
Page 602 18. Materials Menu [ON]/[OFF] [Focus Peaking] [SET] [1-Area AF Moving Speed] [Photo]: [Flash] [Flash Mode] [Firing Mode] [Flash Adjust.] [Flash Synchro] [Manual Flash Adjust.] [Auto Exposure Comp.] [Red-Eye Removal] [Wireless] [Wireless Channel] [Wireless FP] [Communication Light] [Wireless Setup] [Photo]: [Others (Photo)] [Bracketing Type] [Bracketing] [More Settings]...
Page 603 18. Materials Menu [Burst Shot 1 Setting] [Burst Shot 2 Setting] [Shutter Type] [Shutter Delay] [Ex. Tele Conv.] [Time Lapse/Animation] [Self Timer] [Flicker Decrease (Photo)] [Picture Size / Burst Speed] [6K/4K PHOTO] [Rec Method] [Pre-Burst Recording] [Post-Focus] [Start] [Multiple Exposure] [Auto Gain] [Overlay] [Time Stamp Rec.]...
Page 604 18. Materials Menu [Vignetting Comp.] [Diffraction Compensation] [Filter Effect] [Filter Settings] [Simultaneous Record w/o Filter] [Video]: [Image Format] [Rec. File Format] [Image Area of Video] [Rec Quality] [Rec Quality (My List)] [Variable Frame Rate] [Time Code Display] [Count Up] [Time Code Value] [Time Code] [Time Code Mode] [HDMI Time Code...
Page 605 18. Materials Menu [Video]: [Audio] [Sound Rec Level Disp.] [Mute Sound Input] [Sound Rec Gain Level] [Sound Rec Level Adj.] [Sound Rec Level Limiter] [Wind Noise Canceller] [Wind Cut] [Mic Socket] [Special Mic.] [XLR Mic Adaptor Setting] [Sound Output] [Headphone Volume] [Video]: [Others (Video)] [Silent Mode]...
Page 606: Specifications
18. Materials Specifications The specifications are subject to change for performance enhancement. Digital camera body (DC-S1H): Information for your safety Power source: 9.0 V Power consumption: 6.3 W (when recording with the monitor), 4.8 W (when playing back with the monitor) [When using the interchangeable lens (S-R24105)] Type Type...
Page 607 18. Materials Recording format for still images File format for still JPEG (DCF compliant, Exif 2.31 compliant) / RAW / HLG images photo (CTA-2072 compliant) File format for 6K/4K 6K photo: MP4 (H.265/HEVC, AAC (2ch)) photos 4K photo: MP4 (H.264/MPEG-4 AVC, AAC (2ch)) Picture size When the aspect ratio setting is [4:3] (pixels)
Page 608 18. Materials Picture size When the aspect ratio setting is [1:1] (pixels) [L]: 4000k4000 (2656k2656) ¢ [M]: 2848k2848 (1920k1920) ¢ ¢ [S]: 2016k2016 (1376k1376) [High Resolution Mode]: 8000k8000 4K photo: 2880k2880 (2880k2880) ¢ [HLG Photo] ([Full-Res.]): 4000k4000 [HLG Photo] ([4K-Res.]): 2144k2144 (2144k2144) ¢...
Page 609 18. Materials Viewfinder System Aspect ratio 4:3, 0.5 inches, approx. 5,760,000 dots, organic EL (OLED) live view viewfinder Field of view ratio Approx. 100% Magnification Approx. 0.78k (j1.0 m 50 mm at infinity, with aspect ratio set to [3:2]) Eye point Approx.
Page 610 18. Materials Exposure control Light metering 1728-zone metering, multi-metering / centre-weighted system, metering / spot metering / highlight-weighted metering Light metering mode Metering range EV 0 to EV 18 (F2.0 lens, ISO100 conversion) Exposure Programme AE (P) / Aperture-Priority AE (A) / Shutter- Priority AE (S) / Manual Exposure (M) Exposure 1/3 EV steps, n5 EV...
Page 611 18. Materials Dual Native ISO Base sensitivity: 200/1250 (dB display values are based on 200) setting (Cinelike D2/ Auto AUTO / 200 to 51200 Cinelike V2) When [Extended ISO] is set: AUTO / 100 to 204800 Base sensitivity: 200 AUTO / 200 to 1600 When [Extended ISO] is set: AUTO / 100 to sens.
Page 612 [RAWiFINE] / [RAWiSTD.] / [RAW]: 60 frames or more (When recording is performed under the test conditions specified by Panasonic) Minimum illumination Approx. 6 lx (system frequency 59.94 Hz, shutter speed 1/30 of a second) Approx. 6 lx (system frequency 50.00 Hz, shutter speed 1/25 of a second)
Page 613 18. Materials Flash (when using an external flash) Flash mode Auto / Auto/Red-Eye / Forced Flash On / Forced On/Red- Eye / Slow Sync. / Slow Sync./Red-Eye / Forced Flash Off Flash Equal to or smaller than 1/320 of a second ¢...
Page 614 18. Materials External dimensions / Mass External dimensions Approx. 151.0 mm (W)k114.2 mm (H)k110.4 mm (D) (5.94q (W)k4.50q (H)k4.35q (D)) (excluding the projecting parts) Mass Approx. 1164 g/2.57 lb (with one card and the battery) Approx. 1052 g/2.32 lb (only camera body) Operating environment Recommended j10 oC to 40 oC (14 oF to 104 oF)
Page 615: Index
Index Numerics AFS ............Anamorphic (Video) ....182, 1 Shot "6K/4K PHOTO" ..... Anamorphic Desqueeze 1 Shot RAW+JPG......Display ......316, 440, 1 Shot Spot Metering......Anamorphic recording......1-Area (AF) ........Android ..........1-Area AF Moving Speed ....Aperture Bracket ........ 1-Area+ (AF)........
Page 616 Index Burst rate ........... Creative Video mode......Burst Shot .......... Custom (AF) ........Burst Shot 1 Setting ..132, 136, Custom menu ........Burst Shot 2 Setting ..132, 136, Custom mode ........Custom Mode Settings ....384, Cable holder........Calendar screen.........
Page 617 Index Exposure Mode ......249, Focus mode ......... Exposure Offset Adjustment....Focus Peaking ........Extended ISO ........Focus Ring Control ......External flash........Focus Ring Lock ........ External microphone......Focus Stacking ........External monitor/external recorder ..Focus Switching for Vert/Hor ..122, External TC Setting ......
Page 618 Index HLG View Assist ....... 314, Load Custom Mode ....386, HLG View Assist (Monitor)....Location Logging ....... 449, Hot shoe cover........Lock Lever Setting......Hue ............ Log recording ........Long Exposure NR ......Loop Recording (video) ..... 320, i.Dynamic Range........ Looped Focus Frame ......
Page 619 Index Monitor Frame Rate......Picture Quality ......90, Monitor Settings......... Picture Size........88, Monochrome Live View ..... Picture Sort ........MOV .......... 255, Pinpoint (AF)........MP4 ........... 255, Pinpoint AF Setting ......Multi-metering ........Pixel Refresh ........Multiple Exposure ......Play back ...........
Page 620 Index Recording distance reference .... Shoulder strap ........Recording mode........Show/Hide AF Mode ......Recording videos ....... Show/Hide Monitor Layout ....Recording with Time Lapse Shot ..Shutter AF ......... Red REC Frame Indicator....Shutter Delay........Red-Eye Removal..... 233, Shutter Remote Control..... 481, Reduce Rolling Shutter ......
Page 621 Index Video Divide....... 364, Video Frame Marker ....295, Tally Lamp ......... 242, Video menu........Tethered Recording......Video rec. button......62, Thumbnail screen ......Video Rec. Button (Remote) ..430, Time Code ......... 268, Video Speed Class ......Time Lapse Shot ....... 149, Video-Priority Display ......
Page 622 Index XLR Mic Adaptor Setting... 343, XLR Microphone Adaptor....Zebra Pattern ......293, Zone (AF)........... Zoom..........
Page 623: Trademarks And Licences
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. HDAVI Control™ is a trademark of Panasonic Corporation. Adobe is a trademark or registered trademark of Adobe Systems Incorporated in the United States and/or other countries.
Page 624 ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. ® The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance ®...
Page 625 Trademarks and Licences This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC Video.
Page 626 Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.

This manual is also suitable for:

Dc-s1h

Panasonic Lumix S1H Operating Instructions Manual

Table of Contents

1 Introduction

2 Getting Started

3 Basic Operations

4 Image Recording

5 Focus/Zoom

6 Drive/Shutter/Image Stabiliser

7 Metering/Exposure/Iso Sensitivity

8 White Balance/Image Quality

9 Flash

10 Recording Videos

11 Special Video Recording

12 Connections with External Devices (Video)

13 Playing Back and Editing of Images

14 Camera Customisation

15 Menu Guide

Table of Contents

[Image Quality] L

[Video] Menu

[Image Format] L

[Focus] L

[Audio] L

16 Wi-Fi/Bluetooth

17 Connecting to Other Devices

18 Materials

Quick Links

Chapters

Related Manuals for Panasonic Lumix S1H

Summary of Contents for Panasonic Lumix S1H