Selecting The Mode Of The Remote - Sony HT-DDW840 Operating Instructions Manual
Home theater systems: fm stereo / fm-am receiver
Hide thumbs
Also See for HT-DDW840:
- Operating instructions manual (59 pages) ,
- Operating instructions (2 pages) ,
- Service manual (76 pages)
Table of Contents
Advertisement
Remote Button Description
(continued)
Remote
Operations
Button
CLEAR
DVD player
SEARCH DVD player
MODE
TOP MENU/ DVD player
GUIDE
AV MENU VCR/Satellite/ Displays menu.
tuner/
DVD player
O
VCD player/
LD player/
DVD player
V/v/B/b
VCR/Satellite Selects a menu item.
tuner/
DVD player
ENTER/
VCR/satellite Press to enter the
EXECUTE tuner/
DVD player
TV ?/1
TV
-/--
TV
TV VOL
TV
+/–
TV CH +/– TV
TV/
TV
VIDEO
WIDE
TV
USE MODE Remote
AV1 and
Remote
AV2
SOURCE Remote
ALT
Remote
GB
42
Function
Press if you made a
mistake when you press
the number button or
press to return to the
continuous play etc.
Select searching mode.
Press to select the unit for
search (track, index, etc.)
Displays DVD title.
Returns to the previous
menu or exits the menu.
selection.
Turns the TV on or off.
Selects the channel
entry mode, either one
or two digit.
Adjust the volume of the
TV.
Select preset TV
channels.
Selects input signal: TV
input or video input.
Selects the wide picture
mode.
To set up the
remote.
Select the command
mode of the remote.
Selects 2ND AV output.
Change remote key
function to activate those
buttons with orange
printing.
Notes
• Some functions explained in this section may not
work depending on the model of the receiver.
• The above explanation is intended to serve as an
example only.
Therefore, depending on the component the above
operation may not be possible or may operate
differently than described.
• The VIDEO 3, TV/SAT, PHONO, AUX, SOURCE,
MPX/DUAL, ANALOG DIRECT, 12 and ON
SCREEN functions are not available for set
operation.
Selecting the mode of the
remote
Set the remote mode using the USE MODE
button and the remote mode buttons.
Selecting the command mode
You can switch the command mode (AV1 or
AV2) of the remote. If the command mode of
the receiver and the remote is different, you
cannot use the remote to operate the receiver.
Press 1 (AV1) (or 2 (AV2)) while pressing
down USE MODE.
The indicator lights once (twice for AV2) , then
the command mode switches.
To check the mode of the remote
Press USE MODE. You can check the remote
by the indicator.
Mode
AV1
AV2
To reset the remote to factory
settings
Press =/1, AV =/1, and MASTER VOL – at
the same time.
The indicator lights 3 times, then goes off.
Indicator lights
once
twice
Hide quick links:
Advertisement
Table of Contents
