Related Manuals for Sony UP-D71XR
Summary of Contents for Sony UP-D71XR
- Page 1 3-206-814-11 (1) Digital Film Imager Instructions for Use UP-D71XR © 2002 Sony Corporation...
- Page 2 Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Important safeguards/notices for use in Sony dealer regarding this product. the medical environments 1. All the equipments connected to this unit shall be Model No.
- Page 3 Warning on power connection Use a proper power cord for your local power supply. Warning on power connection for medical use Please use the following power supply cord. With connectors (plug or female) and cord types other than those indicated in this table, use the power supply cord that is approved for use in your area.
-
Page 4: Table Of Contents
Table of Contents Introduction About this Manual ..........5 Features ..............5 Location and Function of Parts and Controls ..6 Front ..............6 Rear ..............7 Preparation Supplied Accessories ..........8 Setting the DIP Switches ........9 Connections ............9 Installing the Printer Driver Program .... -
Page 5: Introduction
Introduction Features The Sony UP-D71XR Digital Film Imager is a thermal printer designed to reproduce images transferred from About this Manual the computer via the high-speed interface on a thermal film or thermal paper. You can print out image data with high picture quality,... -
Page 6: Location And Function Of Parts And Controls
E G, g, F, f (Cursor control) buttons (14, 15, 16, Location and Function Use these buttons to increase or decrease a value or of Parts and Controls level shown on the menu, or to scroll up and down through a menu. For details, refer to the pages indicated in parentheses. -
Page 7: Rear
Rear A PARALLEL DATA (IEEE1284) connector (Amphenol 36-pin) (10) Used to connect a Windows computer via the parallel interface, using the parallel interface cable. (not supplied) B Ventilation holes (8, 19) Provided to prevent the printer from overheating. Cover these holes with the fan cover and filter supplied, as required, to prevent the printer from becoming clogged with dust. -
Page 8: Preparation
To attach the fan cover with the filter Preparation The fan cover is provided to prevent the printer from becoming clogged with dust. Attach the fan cover with the filter onto the ventilation holes as required. Supplied Accessories Filter This printer is packed together with the following accessories. -
Page 9: Setting The Dip Switches
Setting the DIP Switches Connections The DIP switches on the rear panel of the printer The printer connects to either a Windows or Macintosh determine the on/off state of the internal SCSI bus computer via the SCSI interface. The printer can also terminator and the SCSI device ID number. -
Page 10: Installing The Printer Driver Program
When connecting a printer via the parallel Installing the Printer Driver interface Program The printer driver program should be installed before starting operation. The instruction manual for the printer driver for the UP- D71XR Digital Film Imager is stored on the CD-ROM supplied with the printer. -
Page 11: Operation
100 sheets of 8 × 10 inches size paper Be sure to use paper made expressly for the UP-D71XR. Place the paper in the paper tray so that the printing If you use other paper, the quality of the printout cannot surface faces down, with the printing surface be guaranteed. -
Page 12: Printing
Notes Printing • The paper tray holds up to 100 sheets of paper. If you exceed this limit, paper jams may occur. Before printing • Do not mix paper of different types. • Ensure that the printer is properly connected to the •... - Page 13 To reprint an image 2 The stored image data is printed as soon as the print command is entered from the computer or Execute the print operation using the print menu of the the PRINT button of the printer is pressed. computer again or press the PRINT button of the printer.
-
Page 14: Setting The Print Quantity
The printer window display returns to standby Setting the Print status and you can print the number of copies based on the new setting. Quantity You can set a print quantity value of up to 10 copies before or during printing. New setting 1, 2 When the printer runs out of paper during... -
Page 15: Menu Operation
default or preset level is shown both as a value and Menu Operation graphically. Default level (or preset level) You can set the following items using the relevant menu: • Adjusting printout quality • Setting the margin print option • Setting the mirror function Besides the above menus, there is a cleaning menu. -
Page 16: Setting The Margin Print Option
You can set the print density to any of 256 steps Setting the Margin Print Option from 00 to FF. G: The print density becomes lighter (up to 00). You can set whether the right and left margins of the g: The print density becomes darker (up to FF). -
Page 17: Miscellaneous
in the paper tray. This will cause the printer to Miscellaneous malfunction. Also, if the paper is used in this state, spots are likely to appear on the printout. • To store a half-used package of paper, replace the paper in its original packing and reseal the package. If possible, before using sealed paper, place it, in its Precautions sealed package, in a warm room for several hours. - Page 18 Place the head cleaning sheet in the paper tray, and Repeat steps 3, 4 and 5 to clean the roller. insert the paper tray in the printer. Load the paper removed in step 1 and re-insert the paper tray. Head cleaning sheet (Place this side up when loading.) To clean the thermal head Hole...
-
Page 19: Specifications
Cleaning the filter Specifications Ventilation holes are provided on the right side and the rear of the printer to prevent the unit from overheating. Power requirements When the message “CLEAN FAN FILTER” appears on 100 to 120 V AC, 50/60 Hz the printer widow display, the filter covering the (for 100 to 120 V AC users) ventilation holes on the rear of the unit has become dirty. -
Page 20: Error Messages
Accessories supplied separately Error Messages Blue Thermal Film Printing Pack UPT-735BL Thermal Paper Printing Pack UPP-725 If a problem occurs, the ALARM indicator lights and an Medical Specifications error message stating the problem appears on the printer Protection against electric shock: window display. -
Page 21: Troubleshooting
If the problem persists, (page 17) turn off the printer and consult your Sony dealer. REMOVE When printing, the cleaning sheet was CLEANING SHEET recognized. - Page 22 Remove the jammed paper. 3 Re-insert the tray guide cover as it was. If you find a piece of paper jammed around the paper outlet: Pull the jammed paper toward you slowly. Re-insert the paper tray into the printer. Ensure that the paper is properly loaded. If you find a piece of paper jammed near the Discard the sheets removed in step 2.
-
Page 23: Index
controls checking 8 Index front 6 rear 7 Terminator 9 Tray guide cover 8 About this Manual 5 Memory 13 Troubleshooting Adjusting Menu item if damage is suspected 21 using the printer menu or printer GRAPHICS 15 if the paper jams 21 driver 14, 15 MARGIN PRINT 16 Assembly... - Page 24 Sony Corporation...