162 lbs. 13 oz. (=) SRS (SOUND RETREIVAL SYSTEM) The (=) SRS (SOUND RETREIVAL SYSTEM) is manufactured by Sony Corporation under license from SRS Labs, Inc. It is covered by U.S. Patent No. 4,748,669. Other U.S. and foreign patents pending.
LISTES DE PIECES SONT D'UNEIMPORTANCE CRITIQUE POUR LA SECURITE DU FONCTIONNEMENT. NE LES REMPLACER QUE PAR DES COMPOSANTS SONY DONT LE NUMERO DE PIECE EST INDIQUE DANS LE PRESENT MANUEL OU DANS DES SUPPLEMENTS PUBLIES PAR SONY. LES REGLAGES DE CIRCUIT DONT L'IMPORTANCE EST CRITIQUE POUR LA SECURITE DU FONCTIONNEMENT SONT IDENTIFIES DANS LE PRESENT MANUEL.
Page 5
Display of Standby/Timer LED Flash Count 2 times 4 times 5 times LED ON 0.3 sec. LED OFF LED OFF 0.3 sec. Diagnostic Item +B overcurrent I-Prot *One flash count is not used for self-diagnostic. Stopping the Standby/Timer LED Flash Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY/TIMER LAMP from flashing.
Page 6
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Handling of Self-Diagnostic Screen Display Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen during repairs. When you have completed the repairs, clear the result display to “0”. Unless the result display is cleared to “0”, the self-diagnostic function will not be able to detect subsequent faults after completion of the repairs.
After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges. 2.
AUX and normal (CATV) input, you should consider using the Channel Fix feature, (see page 26). Your Sony remote control can be programmed to operate your cable box, (see page 36). When using PIP, you cannot view the AUX input in the window picture.
Connecting Your TV Connecting Additional Equipment TV and VCR From cable/ antenna (Optional connection) Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR. Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV.
Page 10
Connecting Your TV TV, Cable box, and Cable KV-27FS16, KV-27FV16, KV-32FS16, KV-29FV16 only For this set up, you can switch between scrambled channels (through your cable box) and normal (CATV) channels by pressing Rear of TV (KV-27FV16 only) Cable Box From Cable When using PIP, the AUX input cannot be viewed in the window picture.
Page 11
Connecting Your TV TV and Satellite Receiver Rear of TV From cable/ antenna Satellite receiver SATELLITE IN VHF/UHF AUDIO R AUDIO L VIDEO Satellite antenna LINE OUT cable Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver. Connect the coaxial cable from your cable or antenna to the VHF/UHF jack on your TV.
MUTING Instantly turns off the sound. Press again or press sound. SYSTEM Powers off all Sony equipment at once, (may not work with older equipment). TV/VIDEO Cycles through available video inputs. Press to change the VHF/UHF...
Basic Menu If, after reading these Operating Instructions, you have additional questions related to the use of your Sony television, please call our Direct Response Center at 1-800-222-SONY (7669) (U.S. residents only) or (416) 499-SONY (7669) (Canadian residents only). to open the menu. Use the...
2-4. PICTURE TUBE REMOVAL WARNING: BEFORE REMOVING THE ANODE CAP High voltage remains in the CRT even after the power is disconnected. To avoid electric shock, discharge CRT before attempting to remove the anode cap. Short between anode and CRT coated earth ground strap. Coated Earth Ground...
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 The following adjustments should be made when a complete realignment is required or when a new picture tube is installed. These adjustments should be performed with rated power supply voltage unless otherwise noted. Set the controls as follows unless otherwise noted: VIDEO MODE: STANDARD PICTURE control: ...
3-2. CONVERGENCE Before starting convergence adjustments: 1. Perform FOCUS, V.LIN AND V.SIZE adjustments. 2. Set BRIGHTNESS control to minimum. 3. Feed in dot pattern. Vertical Static Convergence 1. Adjust V.STAT magnet to converge red, green and blue dots in the center of the screen (Vertical movement adjust V.STAT RV 701 to converge).
3-4. SCREEN (G2) 1. Input a dots pattern. 2. Set the PICTURE and BRIGHTNESS controls at minimum and COLOR control at normal. 3. Adjust SBRT, GCUT, BCUT in service mode with an oscilloscope as shown below so that voltages on the red, green, and blue cathodes are 170 ±...
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 4-1. R564 CONFIRMATION METHOD (HV HOLD-DOWN CONFIRMATION) AND READJUSTMENTS The following adjustments should always be performed when replacing the following components which are marked with the schematic diagram: Part Replaced ( ) DY, T505, CRT, IC501, C507, C520, C505, C509, C515, T504, T503, C551, L510, C546, C537, C547, D517, D518, D519, R560, R561, R562, R563, R565, R566,...
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER Use the Remote Commander (RM-Y168, RM-Y169 or RM-Y171) to perform the circuit adjustments in this section. NOTE: Test Equipment Required: • Pattern generator • Frequency counter • Digital multimeter • Audio oscillator 5-1. SETTING THE SERVICE ADJUSTMENT MODE 1.
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 5-4. MA BOARD ADJUSTMENTS H. Frequency (Free Run) Check 1. Input a TV mode (RF) with no signal. 2. Connect a frequency counter to base of Q501 (TP-500 H. DRIVE) on the A Board. 3. Check H. Frequency for 15735 ± 200 Hz V.
Page 27
V. Center Adjustment (VPOS) Perform this adjustment after performing H. Frequency (Free Run) Check. 1. Input a crosshatch signal. 2. Activate the Service Adjustment Mode. 3. Select the VPOS item with 4. Adjust value of VPOS with center. 5. Press then to save into the memory.
6.2 CIRCUIT BOARD LOCATIONS HX Board CA Board VA Board HA Board • All voltages are in Volts • Voltage is DC with respect to ground unless otherwise noted. D Board • Readings are taken with a 10M digital multimeter. HB Board •...
Page 35
A BOARD SCHEMATIC DIAGRAM — 39 — A BOARD IC VOLTAGE LIST A BOARD TRANSISTOR VOLTAGE LIST — 40 — — 41 — KV-27FV16/29FV16/29FV16C/32FS12/32FS16 A BOARD MARK (*) LIST KV-29FV16 KV-32FS12 KV-29FV16 KV-32FS12 REF NO. LOC. KV-27FV16 KV-29FV16C KV-32FS16 REF NO. LOC. KV-27FV16 KV-29FV16C KV-32FS16...
Page 38
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 CA BOARD SCHEMATIC DIAGRAM Board & Boards — 49 — [RGB DRIVE, CRT DRIVE] CA BOARD WAVEFORMS E E E E B B B B 3 3 3 3 1 1 1 1 B B B B E E E E 4 4 4 4 2 2 2 2 5 5 5 5...
Page 39
D BOARD SCHEMATIC DIAGRAM — 51 — D BOARD TRANSISTOR VOLTAGE LIST VOLTAGE LIST D BOARD MARK (*) LIST KV-27FV16 KV-29FV16 KV-32FS12 KV-29FV16C KV-32FS16 REF NO. LOC. C817 .0039 630V .0027 630V C818 680PF 500V .0015 500V 68 1W R814 R817 R820 R821...
Page 40
KV-27FS12/27FS16/29FS12/29FS12C BC BOARD SCHEMATIC DIAGRAM BC BOARD IC VOLTAGE LIST IC3500 volt IC3501 volt Board Board — 53 — BC BOARD TRANSISTOR VOLTAGE LIST Q3500 volt Q3501 volt IC3501 Q3502 volt volt All voltages are in V Q3503 volt [Y/C SEP, AUTO WIDE] COMPONENT SIDE CONDUCTOR SIDE Q3504...
Page 41
[FRONT A/V, MENU KEY] HA BOARD SCHEMATIC DIAGRAM CN4200 TO A BOARD CN503 MENU SW FRONT V FRONT Y FRONT R — 55 — PIN JACL(L TYPE) FRONT VIDEO2 D4219 J4221 RD9.1EW-T1 N.C. FRONT C D4217 RD9.1EW-T1 FRONT L D4218 RD9.1EW-T1 R4206 4.7k...
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: The components identified by shading and mark are critical for safety. Replace only with part number specified. 7-3. CHASSIS (KV-32FS12/32FS16 ONLY) 7-685-648-79 SCREW +BVTP 3X12 7-685-663-79 SCREW +BVTP 4X16 REF. NO. PART NO. DESCRIPTION A-1372-817-A HX MOUNTED PC BOARD A-1299-218-A A COMPLETE PC BOARD The high-voltage leads associated with the FBT on this board are not included and must be ordered separately.
Les composants identifies per un trame et une marque sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. DESCRIPTION REMARK X-4037-664-1 BEZNET ASSY 3-704-179-31 EMBLEM (NO.9), SONY 4-075-658-01 DOOR 4-047-464-01 CATCHER, PUSH 4-075-657-01 GUIDE, LED 4-068-982-02 MULTI-BUTTON (TOP) 8-735-066-05 CRT 34RSN(SDP)
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: The components identified by shading and mark are critical for safety. Replace only with part number specified. Note: Les composants identifies per un trame et une marque sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie.
Page 49
Note: The components identified by shading and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION C517 1-107-846-11 FILM 0.1µF (KV-32FS12/32FS16 ONLY) C520 1-129-722-00 FILM 0.047µF (KV-27FV16/29FV16/29FV16C ONLY) C520 1-130-118-91 FILM 0.051µF (KV-32FS12/32FS16 ONLY) C521 1-164-646-11 CERAMIC 2200PF...
Page 51
Note: The components identified by shading and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION D601 8-719-991-33 DIODE 1SS133T-77 D602 8-719-991-33 DIODE 1SS133T-77 D603 8-719-982-26 DIODE MTZJ-T-77-33B D604 8-719-028-72 DIODE RGP02-17PKG23 D605 8-719-510-53 DIODE D4SB60L-F D606 8-719-108-18 DIODE TF541M D607...
Page 52
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 REF.NO. PART NO. DESCRIPTION JR505 1-216-295-91 SHORT JR522 1-216-295-91 SHORT JR523 1-216-295-91 SHORT JR526 1-216-295-91 SHORT JR527 1-216-295-91 SHORT COIL L101 1-412-029-11 INDUCTOR CHIP L102 1-412-032-11 INDUCTOR CHIP L103 1-412-029-11 INDUCTOR CHIP L503 1-406-677-11 INDUCTOR L506 1-406-677-11 INDUCTOR L604 1-412-525-31 INDUCTOR L505 1-406-978-11 INDUCTOR...
Page 53
Note: The components identified by shading and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION R231 1-216-069-00 RES-CHIP 6.8K (KV-27FV16/29FV16/29FV16C ONLY) R232 1-216-069-00 RES-CHIP 6.8K (KV-27FV16/29FV16/29FV16C ONLY) R235 1-216-113-00 RES-CHIP 470K (KV-32FS12/32FS16 ONLY) R237 1-216-033-00 RES-CHIP (KV-32FS12/32FS16 ONLY)
Page 54
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: The components identified by shading and mark only with part number specified. REF.NO. PART NO. DESCRIPTION R533 1-215-453-00 METAL (KV-32FS12/32FS16 ONLY) R534 1-215-458-00 METAL (KV-27FV16/29FV16/29FV16C ONLY) R534 1-215-457-00 METAL (KV-32FS12/32FS16 ONLY) R535 1-249-441-11 CARBON R536 1-214-798-21 METAL R537 1-249-401-11 CARBON R538 1-215-889-00 METAL OXIDE...
Page 55
Note: The components identified by shading and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION R648 1-216-397-11 METAL OXIDE (KV-27FV16/29FV16/29FV16C ONLY) R648 1-215-908-00 METAL OXIDE (KV-32FS12/32FS16 ONLY) R649 1-249-417-11 CARBON R650 1-216-387-11 METAL OXIDE 0.68 R651 1-249-429-11 CARBON...
Page 57
Note: The components identified by shading and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION TRANSISTOR Q3500 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX Q3501 8-729-422-27 TRANSISTOR 2SD601A-QRS-TX Q3502 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX Q3503 8-729-422-27 TRANSISTOR 2SD601A-QRS-TX Q3504 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX Q3505 8-729-422-27 TRANSISTOR 2SD601A-QRS-TX...
Page 58
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 REF.NO. PART NO. DESCRIPTION * A-1332-063-A CA (VAR) MOUNTED PC BOARD (KV-27FV16/29FV16/29FV16C ONLY) * A-1332-061-A CA (VAR) MOUNTED PC BOARD (KV-32FS12/32FS16 ONLY) 4-382-854-11 SCREW (M3X10), P, SW (+) CAPACITOR C701 1-104-664-11 ELECT C702 1-136-165-00 MYLAR C703 1-104-664-11 ELECT C704 1-107-651-11 ELECT C705 1-107-652-11 ELECT...
Page 59
Note: The components identified by shading and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION C807 1-163-021-91 CERAMIC CHIP 0.01µF C808 1-163-021-91 CERAMIC CHIP 0.01µF C809 1-110-501-11 CERAMIC CHIP 0.33µF C810 1-130-495-00 MYLAR 0.1µF C812 1-163-021-91 CERAMIC CHIP...
Page 61
Note: The components identified by shading and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION R4208 1-247-895-91 CARBON 470K R4209 1-249-425-11 CARBON 4.7K R4210 1-249-419-11 CARBON 1.5K R4211 1-249-421-11 CARBON 2.2K R4212 1-249-427-11 CARBON 6.8K SWITCH S4217...
Page 63
Note: The components identified by shading and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION R445 1-216-105-91 RES-CHIP 220K R446 1-216-105-91 RES-CHIP 220K R452 1-216-073-00 RES-CHIP (KV-27FV16/29FV16/29FV16C ONLY) R455 1-216-025-91 RES-CHIP R456 1-216-025-91 RES-CHIP R477 1-216-105-91 RES-CHIP 220K...
Page 67
Note: The components identified by shading and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION R039 1-216-045-00 RES-CHIP R040 1-247-815-91 CARBON R041 1-216-045-00 RES-CHIP R042 1-216-071-00 RES-CHIP 8.2K R043 1-249-417-11 CARBON R044 1-216-033-00 RES-CHIP R045 1-216-065-91 RES-CHIP 4.7K...
Page 69
Note: The components identified by shading and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION R364 1-216-025-91 RES-CHIP (KV-32FS12/32FS16 ONLY) R365 1-216-025-91 RES-CHIP (KV-32FS12/32FS16 ONLY) R366 1-216-053-00 RES-CHIP 1.5K (KV-32FS12/32FS16 ONLY) R367 1-216-057-00 RES-CHIP 2.2K (KV-32FS12/32FS16 ONLY) R368...
Page 71
Note: The components identified by shading and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION R3336 1-216-295-91 SHORT R3338 1-216-295-91 SHORT R3340 1-216-295-91 SHORT R3341 1-216-057-00 RES-CHIP 2.2K R3342 1-216-295-91 SHORT R3343 1-216-065-91 RES-CHIP 4.7K R3344 1-216-073-00 RES-CHIP...
Page 74
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Sony Corporation English 2000ES74337-1 Sony Technology Center Printed in USA Product Quality Division 2000.5 9-965-885-01 Service Promotion Dept.