Sony STR-DN1050 Service Manual page 5
Multi channel av receiver
Hide thumbs
Also See for STR-DN1050:
- Help manual (379 pages) ,
- Reference manual (116 pages) ,
- Updating the software (2 pages)
Table of Contents
Advertisement
HDMI Video
Input/Output (HDMI Repeater block)
Format
2D
4096 × 2160p @ 59.94/60 Hz
a
4096 × 2160p @ 50 Hz
a
3840 × 2160p @ 59.94/60 Hz
a
3840 × 2160p @ 50 Hz
a
4096 × 2160p @ 23.98/24 Hz
a
3840 × 2160p @ 29.97/30 Hz
a
3840 × 2160p @ 25 Hz
a
3840 × 2160p @ 23.98/24 Hz
a
1920 × 1080p @ 59.94/60 Hz
a
1920 × 1080p @ 50 Hz
a
1920 × 1080p @ 29.97/30 Hz
a
1920 × 1080p @ 25 Hz
a
1920 × 1080p @ 23.98/24 Hz
a
1920 × 1080i @ 59.94/60 Hz
a
1920 × 1080i @ 50 Hz
a
1280 × 720p @ 59.94/60 Hz
a
1280 × 720p @ 50 Hz
a
1280 × 720p @ 29.97/30 Hz
a
1280 × 720p @ 23.98/24 Hz
a
720 × 480p @ 59.94/60 Hz
a
720 × 576p @ 50 Hz
a
640 × 480p @ 59.94/60 Hz
a
Supports YUV 4:2:0 / 8 bit format only.
1)
Supports 8 bit format only.
2)
These formats are also supported by an MHL connection.
3)
MHL section
Supported MHL version
Incorporates MHL 2
Maximum current
900 mA
iPhone/iPad/iPod section
DC 5V 1.0 A MAX
USB works with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s,
iPhone 4, iPhone 3GS, iPhone 3G, iPod touch (2nd through
5th generation), iPod classic, and iPod nano (3rd through 7th
generation).
Bluetooth technology works with iPhone 5s, iPhone 5c, iPhone
5, iPhone 4s, iPhone 4, iPhone 3GS, and iPod touch (4th and 5th
generation).
AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3
or later, Mac with OS X Mountain Lion, and Mac and PC with
iTunes 10.2.2 or later.
You can use "SongPal" app with this receiver via Bluetooth or
network connection.
You can only charge the iPhone/iPod when they are connected to
the USB port while the receiver is turned on.
DLNA section
Supported format*
MP3 (MPEG 1 Audio Layer-3):
32 kbps – 320 kbps, VBR
AAC:
16 kbps – 320 kbps, CBR, VBR
WMA9 Standard:
40 kbps – 320 kbps, CBR, VBR
WAV:
32 kHz – 192 kHz, 16 bit PCM
32 kHz – 192 kHz, 24 bit PCM
FLAC:
44.1 kHz – 192 kHz, 16 bit FLAC
44.1 kHz – 192 kHz, 24 bit FLAC
AIFF:
32 kHz – 192 kHz, 16 bit PCM
32 kHz – 192 kHz, 24 bit PCM
ALAC:
32 kHz – 96 kHz, 16 bit ALAC
32 kHz – 96 kHz, 24 bit ALAC
DSD:
2.8 MHz, 1 bit DSD
* Compatibility with all encoding/writing software, recording
devices and recording media cannot be guaranteed.
3D
Side-by-Side
Frame packing
(Half)
1)
–
–
1)
–
1)
1)
–
–
2)
2)
–
–
2)
2)
–
–
–
3)
a
3)
a
3)
a
3)
a
3)
a
3)
a
3)
a
3)
a
3)
a
3)
–
–
3)
3)
–
USB section
Supported format*
MP3 (MPEG 1 Audio Layer-3):
32 kbps – 320 kbps, VBR
AAC:
16 kbps – 320 kbps, CBR, VBR
WMA9 Standard:
40 kbps – 320 kbps, CBR, VBR
WAV:
32 kHz – 192 kHz, 16 bit PCM
32 kHz – 192 kHz, 24 bit PCM
FLAC:
44.1 kHz – 192 kHz, 16 bit FLAC
44.1 kHz – 192 kHz, 24 bit FLAC
AIFF:
32 kHz – 192 kHz, 16 bit PCM
32 kHz – 192 kHz, 24 bit PCM
ALAC:
32 kHz – 96 kHz, 16 bit ALAC
32 kHz – 96 kHz, 24 bit ALAC
DSD:
2.8 MHz, 1 bit DSD
* Compatibility with all encoding/writing software, recording
devices and recording media cannot be guaranteed.
Supported USB device
Mass Storage Class, High-speed type
Maximum current
500 mA
NETWORK section
Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
Compatible standards:
IEEE 802.11 b/g
Security:
WEP 64 bit, WEP 128 bit, WPA/
WPA2-PSK (AES), WPA/WPA2-PSK (TKIP)
Radio frequency:
2.4 GHz
Over-Under
(Top-and-Bottom)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
a
a
a
a
3)
3)
a
a
3)
3)
a
a
3)
3)
a
a
3)
3)
a
a
3)
3)
a
a
3)
3)
a
a
3)
3)
a
a
3)
3)
a
a
3)
3)
a
a
–
–
–
–
–
–
STR-DN1050
Bluetooth section
Communication system
Bluetooth Specifi cation version 3.0
Output
Bluetooth Specifi cation Power Class 2
Maximum communication range
Line of sight approx. 10 m (33 feet)
1)
Frequency band
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible Bluetooth profi les
2)
A2DP (Advanced Audio Distribution Profi le)
AVRCP 1.3 (Audio Video Remote Control Profi le)
Supported Codecs
3)
SBC
4)
, AAC, aptX
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling frequency 44.1 kHz)
1)
The actual range will vary depending on factors such as
obstacles between devices, magnetic fi elds around a microwave
oven, static electricity, cordless phone, reception sensitivity,
antenna's performance, operating system, software application,
etc.
Bluetooth standard profi les indicate the purpose of Bluetooth
2)
communication between devices.
Codec: Audio signal compression and conversion format
3)
Subband Codec
4)
General
Power requirements
Area
Power requirements
US, Canadian
120 V AC, 60 Hz
Australian,
230 V AC, 50 Hz
AEP, UK
Power consumption
240 W
Power consumption (during standby mode)
0.3 W (When [Control for HDMI], [Pass Through],
[Network Standby]*, and [Bluetooth Standby] are set to
[Off], and the receiver in zone 2 is turned off.)
0.7 W (When [Control for HDMI] is set to [On], [Pass
Through], [Network Standby]*, and [Bluetooth Standby] are
set to [Off], and the receiver in zone 2 is turned off.)
1.3 W (When [Control for HDMI] and [Bluetooth Standby]
are set to [On], [Pass Through] and [Network Standby]* are
set to [Off], and the receiver in zone 2 is turned off.)
* US and Canadian models only.
Dimensions (width/height/depth) (Approx.)
430 mm × 172 mm × 329.4 mm
(17 in × 6 7/8 in × 13 in) including projecting parts and
controls
Mass (Approx.)
10.0 kg (22 lb 1 oz)
Design and specifi cations are subject to change without notice.
Supplied accessories
• Startup Guide (1)
• Reference Guide (1)
• Remote control (1)
• R03 (size AAA) batteries (2)
• FM wire antenna (aerial) (1)
• AM loop antenna (aerial) (1)
• Optimizer microphone (1)
5
- Quick Links:
- Test Mode
- Troubleshooting
- Electrical Parts List
Hide quick links:
Advertisement
Table of Contents
