Page 1
2600-00IL7PGA2 Ver. SCM Compact (IPX-S300B) System Description...
Page 2
This manual is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright. No information contained herein may be copied, translated, transcribed or duplicated for any commercial purposes or disclosed to the third party in any form without the prior written consent of SAMSUNG Electronics Co., Ltd.
FCC Requirements The IPX-S300B (SCM Compact) equipment complies with FCC Part 68 Rules and requirements adopted by Administrative Council for Terminal Attachment (ACTA). The FCC Part 68 label is located on the bottom of the chassis. The label contains: ...
Page 4
Service Center If you need assistance during troubleshooting, please contact out local office SAMSUNG ELECTRONICS, CO., LTD. for repair or warranty information. If the trouble is causing harm to the telephone network, the telephone company may request you to remove the equipment from the network until the problem is resolved.
Page 5
American Society of Composers, Authors and Publishers (ASCAP) or other similar organizations if copyright music is transmitted through the Music on Hold feature SAMSUNG ELECTRONICS, CO., LTD. hereby disclaims any liability arising out of failure to obtain such a license. DISA Warnings The lines used for the DISA feature must have the disconnected Supervision option provided by the telephone company.
Page 6
Every wire for communication should be larger than 26 AWG. Double pole/neutral fusing. Underwriters Laboratories The IPX-S300B has been tested to comply with Safety Standards in the United States and Canada. This system is listed with Underwriters Laboratories. The cUL Mark is separately shown on the label.
Page 7
Observe the following guidelines to minimize the potential for Electrostatic Discharge (ESD) damage, which can cause intermittent or complete component failures. When handling IPX-S300B or its components, wear grounding wrist straps to avoid ESD damage to the equipment. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself.
INTRODUCTION Purpose This document describes the basic overview and features of the SCM Compact system. The product model name of the SCM Compact system is the IPX-S300B. Document Content and Organization This manual consists of the following parts. CHAPTER 1. IPX-S300B System Overview This part describes the IPX-S300B network interface and the operation environments and capacity of the IPX-S300B.
Page 9
This part describes the supported specifications and RFC used in the IPX-S300B. ANNEX B. CDR This part describes the call log format and CDR format used in the IPX-S300B. ANNEX C. Open Source Announcement This part describes the open source announcement.
IPX-S300B System Overview General Description The SCM Compact (model name: IPX-S300B) provides an IP-based service platform for using a wide range of applications for communications within an enterprise. It is aimed at the SMB market in existing small-scale hybrid PBXs.
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. System Architecture As shown in Figure 1, the SCM Compact consists of the IPX-S300B, gateway, IP phone, SCM Administrator, and application server. Data network systems such as switches and routers are basic requirements of the SCM Compact and are not included as system components.
SCM Administrator SCM Administrator is web-based service with a graphical user interface for managing IPX- S300B. You can use a web browser on a normal PC to access IPX-S300B and execute various IPX-S300B services like Fault Management, Performance Management, Security Management, Accounting Management and Subscriber Management.
Page 19
The product provides a default conference capacity and services add-on conference. By adding VPU card, IPX-S300B can be expanded channels and can be added conference service (For example, Meet-me conference, Paging on Answer). The Meet-me conference service requires a license.
Record) that are generated from various call handling systems, extracts the billing data needed for actual operation, and performs the tasks such as various billing related statistics and others. IPX-S300B sends CDR that is generated after the call handling to the Billing server by using the protocols such as TCP or FTP.
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. IPX-S300B Specification 1.3.1 Hardware and Software Specification The IPX-S300B has the following hardware and software requirements for operation. Table 1. IPX-S300B Hardware Specification Item Specification Remark Dimension (W ×...
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться.. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. 1.3.2 IPX-S300B Capacity Table 3. IPX-S300B Capacity Item Specification Remark No. of Telephone...
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. CHAPTER 2. IPX-S300B Hardware This chapter describes the IPX-S300B hardware. Features The IPX-S300B hardware has the following features. Safety Materials and components used in hardware are mechanically sturdy and satisfy mechanical and electrical requirements for a communications system. ...
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. IPX-S300B 2.2.1 IPX-S300B IPX-S300B can be mounted on 19-inch (482.6 mm) wide rack and its height is 1.75-inch (1U). The appearance is like the following. Front Front (Dual Power Supply) Figure 2.
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться.. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. Hardware Structure 2.3.1 IPX-S300B IPX-S300B hardware consists of CMU board, GWU board, optional modules, power supply and 3 fans. Optinal Modules - 2PRI - 4FXO...
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться.. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. 2.3.1.1 CMU Board The CMU board of IPX-S300B is like the following. DDR3 Memory Ethernet Block NAND Flash Figure 4.
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться.. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. External Interface 2.4.1 IPX-S300B IPX-S300B provides external interfaces like the following. IPX-S300B Front Reset switch GbE Port...
IPX-S300B IPX-S300B (Dual Power Supply) Figure 15. IPX-S300B LED Table 6. IPX-S300B LED Description State Description Optional module port Module not mounted or ready to Service Operating (port in use) Layer2 link status (1PRI, 2PRI, 2BRI)
Page 36
It supports to reset the system by reset switch. Optional Modules IPX-S300B supports optional cards such as 4 ports FXO card, 4 ports FXS card, 2 ports BRI card, 1 port PRI card, 2 ports PRI card, a VPU card.
IP Phones (SMT-I series) This chapter describes the types and functions of devices that can be connected to the IPX- S300B system. Types and functions of devices that can be connected to the IPX-S300B system are the same for all systems.
Since system resources are limited, a service is required to set the maximum number of calls at any one time. The Call Admission Control (CAC) service provided by IPX-S300B includes CAC by call counts, CAC by location bandwidth, CAC by system resources, and CAC by trunk call counts.
Page 45
LCR methods. Call Restriction The IPX-S300B allows restriction of outgoing calls or incoming calls for each user. It is also possible to restrict all outgoing calls and incoming calls. Also, when an external call is placed through a trunk route, usage of the trunk route can be allowed or disallowed.
Page 46
If you are using a phone with programmable buttons, such as a Samsung phone, you can assign up to eight call buttons. If there are ten call buttons, the phone can control up to ten calls simultaneously.
Page 47
IPX-S300B provides Internal CLI Name, used for inbound trunk call. It is used for subscriber or service group. Premium CID IPX-S300B provides supplementary information of opposite user to a FMC user. Basically photo is delivered and additional information are possible up to 6 according to a configuration.
Page 48
History Log IPX-S300B provides history logging capability for the events like a SPAM call, call logging, paging on answer call, wakeup call, feature set, registration fail, dispatch call, notice board etc.
Page 49
A logout button is included in Samsung phones’ soft buttons. Pressing this logs the phone out. If the user leaves the phone without logging it out, it is automatically logged out after a set period of time, preventing unauthorized users from using the phone.
Page 50
When IPX-S300B receives a sent message, IPX-S300B checks whether the calling phone supports the codec which set as Forced Audio Codec. IPX-S300B send the message to a called phone with only the codec if the calling phone supports that, or rejects the call.
Page 51
10 phone numbers can be assigned per phone. Music On Hold When a call is put on hold, IPX-S300B can connect its built-in sound source and play a tone or music for the phone or the trunk.
Page 52
Calendar Exceptions To use ring plans, IPX-S300B refers the calendar which is made when a user group is created for maximum of 20 years. Each day assigns to a day type from Monday to Sunday, Weekday and Weekend as a default.
Page 53
Ring Plan Override IPX-S300B provides a manual override service which allows temporary use of a particular ring plan regardless of the current time. When using ring plan override, you can use the override temporarily by specifying an expiration time or use it permanently by not specifying an expiration time.
Page 54
Default announcement is Announcement ID 1203. Group Call Forward IPX-S300B can forward calls for multiple users to one common number by date, day of the week or time of the day according to the system administrator settings. This is call group call forwarding.
Page 55
Class Of Service (COS) IPX-S300B allows the administrator to set privileges for each user. Since setting service privileges for all the users individually could be very complicated, Class of Service can be created with their own set of service privileges and users can be assigned to their appropriate Class of Service.
Page 56
Therefore IPX-S300B uses feature codes when configuring features or when using features temporarily. If you press a feature button on a Samsung phone, IPX-S300B is also designed to process the feature code assigned to the feature button.
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. User Authentication IPX-S300B can limit its service to allow only those users who passed a series of authentication process to receive the service. For user authentication, IPX-S300B provides...
Page 59
The user enters an account code as instructed. The voice announcement system verifies that a valid account code has been entered. If the account code entered is valid, IPX-S300B uses the access code received in step (1) to select a route and makes a call for the external number specified.
Page 60
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. Basic Announcement IPX-S300B provides basic announcement messages on users such as ‘The dialed number you have dialed is not in service’, and additional services such as notification for the user being unavailable to answer the call, Music On Hold, etc.
Page 61
WE VoIP subscriber can request the IPX-S300B for remote dialing service over the data channel. When a remote dialing service request is received, the IPX-S300B calls the WE VoIP subscriber over the 3G network. When the subscriber answers the call, the system places an outgoing call to the number originally entered by the WE VoIP subscriber and connects the call.
Page 62
This function is used for TLS connection management distribution of extension phones using the TLS protocol. LDAP Server The LDAP server uses the internal database of the IPX-S300B to provide information to the LDAP client. LDAP Client For system load and network management, the IPX-S300B assigns different access privileges to users accessing the LDAP server according to their levels.
Page 63
Ring Plan The IPX-S300B supports creation of up to 20 ring plan schedules, each of which can have up to 16 ring plans in total including 15 ring plans that are assigned by date, day of week, or hour (ring plans 1-15) and a default ring plan that is used in hours not covered by any other ring plan.
Page 64
The service by pressing only the group number is also supported. In IPX-S300B, if a member is taking a call and could not receive the multicast paging request, the member can receive the multicast paging after the call is ended. Also, when more than one multicast paging is on hold, the multicast paging requested first will be received.
The Barge In feature is also known as Call Intrusion or Call Override. The Barge In feature is provided with warning or without warning depending on whether the user is notified that the call has been intruded into. IPX-S300B services both types of the feature.
Page 68
Blind Transfer This feature allows the user to transfer the call directly to another number without hold it. Although IPX-S300B and Samsung SIP phones support blind transfer, this has the same effect as semi-blind transfer from the user’s point of view.
Page 70
The Callback Busy function is for connecting the calling and called users by generating a call to both parties when the called user for whom the IPX-S300B is scheduled becomes idle after the calling user has requested a callback to the called user whose line was busy in the first instance.
Page 72
Mobile Extension (MOBEX) The mobile extension (MOBEX) feature allows incoming calls to be directed not only to the landlines and mobiles phones registered with IPX-S300B but also to external phone numbers. This is one example of the multi-ring service. The service also allows the user to answer the call with his/her mobile phone and then when the user returns to the office, the call can be transferred to the landline in the office and be picked up for continued conversation.
Page 73
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. Voice Mail Integration IPX-S300B’s built-in voice mail system is utilized for providing the basic voice mail services including deflection to voice mail, and transfer to voice mail.
CHAPTER 6. Application Features This part describes the applications provided by IPX-S300B and how to configure them. IPX-S300B includes a basic conference system and a basic ACD server. IPX-S300B Express also includes an advanced conference system and a voice mail system.
When there is an incoming call for the ACD group, a short moment is allowed for the caller to hear the ring back tone, and then the announcement system of the IPX-S300B is connected to play the announcement. Subsequently, if there is an agent available, the call is connected to the agent.
Page 79
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться.. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. ACD Statistics The IPX-S300B provides statistics on processing of incoming calls for the ACD group and ACD calls processed by each agent. ACD Agent Program While it is possible for ACD agents to process ACD calls by just using the phone, they can also process ACD calls more conveniently using a dedicated agent program.
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться.. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. Conference IPX-S300B provides Conference service. It has the Internal Conference service witch provides Add-on conference. VPU card can be installed to provide advanced conference services.
VoiceMail/Auto Attendant (VM/AA) VM/AA provided by IPX-S300B refers to the integrated messaging system interfacing with IP interface within IPX-S300B. In other words, it provides voice mail, automatic repeater, e-mail server interface, and other functions to users. The IPX-S300B provides voice mail service over 6 channels.
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. Call Recording Since IPX-S300B V2.0, new recording feature is supported. Unlike recording supported in the previous VM, it consolidates and manages recorded files, and it is easy to listen, download, and backup recorded files.
PC that takes the functionality commonly used and understood on our telephones and puts it at your finger tips and Screens on your PC. The Samsung Communicator can be run in three different Modes. The Samsung Communicator can be a stand alone device when in the Soft Phone Mode, when in UC Phone Mode it can work in connection to a UC phone (SMT-i Series) device.
Video Calls And more… For more details, see the Samsung Communicator User Guide. 6.6.2 ACD Agent ACD Agent Desktop is the Windows-based Client Application that resides on the agent’s computer. With Agent ACD, you can control calls with your computer.
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. 6.6.3 Third Party Applications IPX-S300B can interface with external SIP Conference Server, SIP VMS, SIP UMS, SIP IVR (AA Server), and Legacy (PSTN) VMS, and can be categorized as shown below according to the interface type.
SIP conference server, SIP VMS server, SIP IVR, and SIP UMS server. Standard CSTA Method The IPX-S300B uses the standard CSTA Phase-II protocols to provide interfacing with any external application servers such as ACD server and IP relay server.
IPX-S300B server, the IPX-S300B starts automatically. IPX-S300B manual start and stop To manually start or stop the IPX-S300B, you should connect the console port of the IPX-S300B and execute the reboot command. Or you can reboot system in SCM Administrator.
Page 98
This is because the process manager thinks that the process would terminate abnormally again when restarted. Process status Each process of the IPX-S300B can be in any of the following status: NORMAL, ALIVE, WAIT or FAIL. Process level (priority)
Minor Major Critical to notify the administrator of any system problems. The system resources monitored by IPX-S300B include CPU, memory and hard disk drives. Viewing System Resource Information The Chart of Right Side display CPU, memory, and hard disk. Also, CPU, memory and hard disk usage in the System Viewer screen in the bottom left corner.
IPX-S300B provides a feature for viewing the information of currently processed calls. It also allows the administrator to terminate currently processed calls by different criteria such as unusually long calls or illegitimate calls. IPX-S300B also provides the trace feature which allows the administrator to trace calls or protocol messages.
9.3.5 Database Management IPX-S300B provides a feature for backing up the database during operation. When upgrading IPX-S300B to a newer version, you can back up the database, upgrade the version, and then restore the database for use. Database Space IPX-S300B provides a feature for displaying the current size of the database.
IPX-S300B can authenticate registration of the users-including phones, routes, gateways, and applications-which provide services by performing SIP registration with IPX-S300B. Also, when an extension user makes a call, IPX-S300B provides a service for allowing the call to be made after obtaining an external server’s authentication.
Local Store (Saving Account Information in IPX-S300B) The CDR files generated are backed up and saved in the IPX-S300B hard disk without interoperating with any external account systems.
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться. Traffic Reports The IPX-S300B provides hourly, daily, and monthly statistics for calls and alarms in the system. Maximum periods for hourly statistics, daily statistics, and monthly statistics are 7 days, 90 days, and 365 days respectively.
Status: A status change, such as redundancy status change, which is not an alarm or a fault has occurred. In the bottom left corner of the IPX-S300B Administrator screen is the System Viewer window which displays the number of alarms generated in the IPX-S300B system. When an alarm is generated in IPX-S300B, the System Viewer window displays the number of alarms generated for each level.
Page 108
IPX-S300B. Email Notification The alarm, fault, and status information generated in IPX-S300B can be notified to the administrator by email. To allow this, the email field in the alarm profile, fault profile or status profile must be set to Enable and the required settings for the email server must be configured in email settings.
9.7.1 Trial Version License Key The IPX-S300B provides a trial version license for trying out phone user count settings, scheduled conference and VM function, ACD function, CSTA interface function, etc. The trial version license can be used for up to one month from system installation.
When editing the Excel spreadsheet offline, you can edit the information for each field and also add or delete lists. IPX-S300B can be updated with any changes made in the Excel spreadsheet.
When dialing a phone number on the phone, if the number entered matches a specified rule, the phone can be set to send a sent message immediately to IPX-S300B without waiting for the next number or timeout. IPX-S300B can set dial plans to be used by phones and send them to all phones.
ANNEX A. Supported Specifications and RFC ANNEX A. Supported Specifications and RFC A.1 SIP RFC on SIP protocol and related RFCs being supported in IPX-S300B is as follows. Description RFC2246 The TLS Protocol Version 1.0 RFC2327 Session Description Protocol RFC2833...
Page 117
Calling SIP URI Calling SIP URI Calling User Group User Group to which the caller belongs Incoming Route Incoming Route Number Called Information in the IPX-S300B Called Type Called Type - 0: Unknown - 1: User - 2: Service - 3: Trunk (End Point Type)
Page 118
Call Duration Call Duration Time (Disconnect Time-Answer Time) Answer Time Time when the call is connected Disconnect Time Call End Time Calling Information in the IPX-S300B Calling Type Caller Type - 0: Unknown - 1: User - 2: Service - 3: Trunk (End Point Type)
Page 119
Pick up Pick up - 0: Normal Call - 1: Pickup Call Smart Routing - 1:internal IPX-S300B Smart Routing Call - 2:inter-IPX-S300B Smart Routing Call Transferer User Number who transfers the call Service Type Service Type which is applied to the call Refer to ‘IPX-S300B _CDR Interoperability Guide’.