Advanced Wireless Settings - D-Link DIR-605 Manual

Wireless n router

Hide thumbs Also See for DIR-605:

User manual (102 pages)

Quick install manual (12 pages)

User manual (82 pages)

Table Of Contents

100

101

102

Table of Contents

Section 3 - Configuration

Transmit Power:

Set the transmit power of the antennas.

Beacon Period:

Beacons are packets sent by an Access Point to

synchronize a wireless network. Specify a value.

100 is the default setting and is recommended.

RTS Threshold:

This value should remain at its default setting of

2432. If inconsistent data flow is a problem, only

a minor modification should be made.

Fragmentation

The fragmentation threshold, which is specified

Threshold:

in bytes, determines whether packets will be

fragmented. Packets exceeding the 2346 byte

setting will be fragmented before transmission.

2346 is the default setting.

DTIM Interval:

(Deliver y Traffic Indication Message) 3 is

the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast

messages.

WLAN Partition:

This enables 802.11d operation. 802.11d is a wireless specification developed to allow implementation of wireless networks in

countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.

WMM Enable:

WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless

clients.

Short GI:

Check this box to reduce the guard interval time therefore increasing the data capacity. However, it's less reliable and may

create higher data loss.

D-Link DIR-605 User Manual