Enabling The Pim And Pim6 Features - Cisco Nexus 7000 Series Configuration Manual
Nx-os multicast routing
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
Configuring PIM and PIM6
Note
If you are familiar with the Cisco IOS CLI, be aware that the Cisco NX-OS commands for this feature might
differ from the Cisco IOS commands that you would use.
Enabling the PIM and PIM6 Features
Before you can access the PIM or PIM6 commands, you must enable the PIM or PIM6 feature.
Before you begin
Ensure that you have installed the Enterprise Services license.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Command or Action
config t
Example:
switch# config t
switch(config)#
feature pim
Example:
switch(config)# feature pim
feature pim6
Example:
switch(config)# feature pim6
show running-configuration pim
Example:
switch(config)# show
running-configuration pim
show running-configuration pim6
Example:
switch(config)# show
running-configuration pim6
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
Enabling the PIM and PIM6 Features
Purpose
Enters global configuration mode.
Enables PIM. By default, PIM is disabled.
Enables PIM6. By default, PIM6 is disabled.
(Optional) Shows the running-configuration
information for PIM, including the feature
command.
(Optional) Shows the running-configuration
information for PIM6, including the feature
command.
(Optional) Saves configuration changes.
79
- Quick Links:
- Configuring Msdp
Hide quick links:
Advertisement
Table of Contents
