Dell Embedded Box PC 5000 Installation And Operation Manual
Hide thumbs
Also See for Embedded Box PC 5000:
- Service manual (115 pages) ,
- Technical manualbook (54 pages)
Related Manuals for Dell Embedded Box PC 5000
Summary of Contents for Dell Embedded Box PC 5000
- Page 1 Installation and Operation Manual Regulatory Model: N01PC Regulatory Type: N01PC001...
- Page 2 Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
- Page 3 The Dell Embedded Box PC 5000 series allows you to connect (wired or wireless) to network enabled devices and manage them remotely in your existing network ecosystem. The system can be either mounted on the wall using the Dell approved wall mount kit or mounted into your existing rack infrastructure using the Rail mount. The system is running on Windows 10, Ubuntu,...
-
Page 4: System Features
System Features Top - View Feature Expansion-card slot 1 Supports an optional PCIe discrete graphics solution, 20-25W(12V/2A) graphics card and 10W thermal capability. Expansion-card slot 2 Supports an optional PCIe discrete graphics solution, 20-25W(12V/2A) graphics card and 10W thermal capability. Power button Press and hold for 2 seconds to turn on the system if it is turned off. - Page 5 Bottom - View Feature GPIO-in 9 pin port Connect to a GPIO-out enabled device or dongles GPIO-out 9 pin port Connect to a GPIO-in enabled device or dongles USB 2.0 port (4) Connect peripherals such as storage devices, printers, displays and so on. Provides data transfer speeds up to 480 Mbps.
- Page 6 0.8 to 2.5 mm (18 to 14 AWG). WARNING: Use only the power adapter provided with DELL. The system should be operated only with power source of the same kind as indicated on the Power adapter rating plate. WARNING: The symbol indicates hot surface or adjacent hot surface that can obtain temperature during normal use that can cause a burn.
- Page 7 WARNING: Connect power to either Phoenix Connector or the Barrel Connector only. Connecting to both power sources may damage equipment and present a fire risk. Install the system on the wall mount using the Dell approved wall mounting kit. Install the system on the rack infrastructure using the Dell approved DIN-rail mounting brackets.
- Page 8 Drill four holes in the wall that correspond to the holes in the mounting bracket, then place the system against the wall and align the holes in the mounting brackets with the holes in the wall.
-
Page 9: Specifications
Tighten the screws to secure the system to the wall. Specifications Ports and connectors Audio/video One HDMI port One VGA port Two DisplayPort One line-in port One line-out port One microphone port microSD card One microSD-card slot ... - Page 10 Four RS232 port Four USB 3.0 port Two USB 2.0 ports Communications Wi-Fi Dual-band 802.11b/g/n/ac Bluetooth Bluetooth 4.1 LE Power requirements Phoenix connector input 12-26V voltage/current 10.8A-5A (130W) Power input 12-26V voltage/current 10.8A-5A (130W) WARNING: Connect power to either Phoenix Connector or the Barrel Connector only.