Table of Contents
Advertisement
D. Option
(1) LCD kit
6 pcs.
Key
(LINE, MENU, ITEM,
AR-PA1
Lamp
2 (DATA, ONLINE)
Display
20 digits
When installing the AR-PB8 to a model which is not equipped with
the LCD panel, the LCD kit (AR-PA1) must be installed to.
a. LCD message
Status
LCD display
AUTO
PCL
Online Online
PS2 A
HEX
Data Loss
Press ENTER
Error
Memory Full Press ENTER
Tray 1 <Paper Size>
Tray 2 <Paper Size>
Tray 3 <Paper Size>
Tray 4 <Paper Size>
Paper Out
Bypass <Paper
Size>
Error
Tray <Paper Size>
Check Panel
Clear Paper
Path
Copies
Resolution
Smoothing
Toner Save
Page Protection
Main Menu
2-Sided Printing B
User
setting
Paper Source
Paper Size
Orientation
Emulation
Set IP Address
Network
Set Subnet Mask
Menu 1
Set Default
Gateway
,
, ENTER)
2 lines
Content
Auto select to
emulation
PCL
PS2 A
HEX
When the paper
feed tray is
selected to other
than AUTO.
When the paper
feed tray is
selected to AUTO.
Toner empty
Drum replacement
Cover open
Service call error
Paper jam
Paper exit tray full
Printing of the set
quantity is made.
Printing at the set
resolution is made.
Smoothing function
setting.
Toner save mode
setting
Setting of page
protection function
Setting of duplex
function and
binding direction
Tray select
Paper size select
Setting of print
direction
Emulation setting
IP address setting
is made.
Subnet Mask
setting is made.
Default Gateway
setting is made.
Status
LCD display
Network
Menu 1
PS2 Menu
2, A
User
setting
Interface
Menu
Test Printing
Menu
1 When installing the network Interface card.
2 When installing the AR-PS1.
b. LED display
Extinguished
ON LINE light
Lit
Extinguished
Lit
DATA light
Blinking
c. Operation keys
Changes between the on-line and off-line
modes.
When the printer is on-line, it can receive data
from the computer with which it is connected.
LINE key
When the printer is off-line, you can use
operation panel keys to make print settings.
Note, however, that you cannot make settings
if the "Data Remaining" message is displayed.
Used to show setting menus on the display in
MENU key
sequence.
Used to show the setting items of the selected
ITEM key
menu in sequence.
Left arrow key
Used to change the value of any item.
Right arrow key
ENTER key
Used to enter a new value.
Invalid when the printer is on-line.
1 – 3
AR-PB8
Content
Enable/Disable
Enable TCP/IP
TCP/IP
Enable/Disable
Enable Netware
Netware
Enable/Disable
Enable EtherTalk
EtherTalk
Reset Print Server
Reset to Defaults
Card to default
Setting of printing in
Print PS2 Error
case of PS Error
If data reception is
not completed
I/O Time Out
within the set time,
it is judged as a
time out error.
Configuration page
Configuration Page
is printed.
PCL6 Font page is
PCL6 Font Page
printed.
PS2 Font page is
PS2 Font Page
printed A.
Indicates that the printer is
off-line and data cannot be
transferred or printed. Make
settings from the operation
panel in this mode. Note,
however, that you cannot make
settings if the "Data Remaining"
message is displayed.
Indicates that the printer is
on-line and data can be
transferred and printed.
Indicates that there is no data
being received or processed.
Indicates that the printer is
receiving or processing print
data.
Indicates that there is print data
remaining in memory that has
not yet been printed.
Advertisement
Table of Contents
