Table of Contents
Advertisement
Chapter 3
[21]
[22]
F-3-256
Loosen the screw [26] of the tension
arm [25]; then, force the arm clockwise
to mount it. When you have attached the
timing belt [23], tighten the screw [26].
[25]
[26]
[23]
F-3-257
3.4.10.10 Removing the
Feeder Unit
1) Remove the screw [1], and pull out the
busing [2]; then, detach the original
pickup tray [3].
3-68
[24]
[23]
0007-2842
[3]
[1]
F-3-258
2) Remove the 2 screws [4] on the front
cover side; then, remove the locking
support
[5],
connector [6].
F-3-259
3) Disconnect the sensor connector [7].
4) Remove the 2 screws [8], and detach the
[2]
and
disconnect
[4]
[5]
the
[6]
Hide quick links:
Advertisement
Table of Contents
