Cleaning The Thermal Head; Cleaning The Micr Head; Cleaning The Scanner - Epson TM-S9000MJ User Manual
Hide thumbs
Also See for TM-S9000MJ:
- Technical reference manual (104 pages) ,
- User manual (100 pages) ,
- Setup manual (2 pages)
Table of Contents
Advertisement
Cleaning the Thermal Head
Epson recommends cleaning the thermal head periodically (generally every 3 months) to
maintain thermal printing quality.
CAUTION:
The thermal head can be very hot after printing. Be careful not to touch it, and let it cool before you
clean it.
Do not damage the thermal head by touching it with your fingers or any hard object.
Turn off the product, open the roll paper cover, and clean the thermal elements of the thermal
head with a cotton swab moistened with an alcohol solvent (ethanol or IPA).
Cleaning the MICR Head
When the MICR head becomes dirty, the product cannot read the magnetic ink characters
normally.
Clean the MICR head every 6 months or every 100,000 passes by setting the following cleaning
sheet in the same way as cut sheet paper. (See "Inserting Cut Sheet Paper" on page 13.)
KIC Team, Inc.
•
Waffletechnology
•
Epson Check Scanner Cleaning Kit (model:KWEPS-KCS2)
Note:
Use a cleaning sheet only one time; then discard it.
It is recommended to clean the MICR head once per week or once every 2,000 sheets for good
reading results.
It is recommended to clean the scanner after cleaning the MICR head.
Cleaning the Scanner
If the glass of the scanner gets soiled from ink or paper dust, the quality of scanned data may
deteriorate. Clean the glass every 6 months or every 100,000 passes by following the steps
below.
Note:
It is recommended to clean the scanner once per week or once every 2,000 sheets for good reading
results.
®
MICR cleaning card (model:CS1B15WS)
17
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
