Disabling Vpcs - Cisco Nexus 3548 Configuration Manual
Nx-os interfaces release 9x
Hide thumbs
Also See for Nexus 3548:
- Command reference manual (556 pages) ,
- Configuration manual (230 pages) ,
- Installation manual (112 pages)
Table of Contents
Advertisement
Disabling vPCs
4. (Optional) switch# copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
switch# configure terminal
Step 2
switch(config)# feature vpc
Step 3
(Optional) switch# show feature
Step 4
(Optional) switch# copy running-config startup-config
Example
This example shows how to enable the vPC feature:
switch# configure terminal
switch(config)# feature vpc
Disabling vPCs
You can disable the vPC feature.
Note
When you disable the vPC feature, the Cisco Nexus device clears all the vPC configurations.
SUMMARY STEPS
1. switch# configure terminal
2. switch(config)# no feature vpc
3. (Optional) switch# show feature
4. (Optional) switch# copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
switch# configure terminal
Step 2
switch(config)# no feature vpc
Step 3
(Optional) switch# show feature
Step 4
(Optional) switch# copy running-config startup-config
Cisco Nexus 3548 Switch NX-OS Interfaces Configuration Guide, Release 9x
74
Purpose
Enters global configuration mode.
Enables vPCs on the switch.
Displays which features are enabled on the switch.
Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.
Disables vPCs on the switch.
Displays which features are enabled on the switch.
Copies the running configuration to the startup
configuration.
Configuring Virtual Port Channels
Hide quick links:
Advertisement
Table of Contents
