Change The Viewing Angle Of Your Phone - Cisco 7811 User Manual
Multiplatform phones, 7800 series
Hide thumbs
Also See for 7811:
- User manual (102 pages) ,
- Manual (27 pages) ,
- Quick reference card (2 pages)
Table of Contents
Advertisement
Change the Viewing Angle of Your Phone
Procedure
Step 1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
Step 2
Rotate the tab 180 degrees.
Step 3
Hold the tab between two fingers, with the corner notches facing you.
Step 4
Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from
the top of the rotated tab.
Step 5
Return the handset to the handset rest.
Change the Viewing Angle of Your Phone
You can change the angle of the phone, except the Cisco IP Phone 7811, to eliminate glare on the screen.
Procedure
Step 1
Unplug the phone from the network.
Step 2
Place the phone so that the keypad faces the desktop.
Step 3
Grasp one side of the footstand with one hand and place your other hand on the phone.
Step 4
Hold down the phone and pull up on the footstand.
Step 5
Turn the footstand over.
Step 6
Push the footstand back into the phone until the stand locks into place.
Step 7
Place the phone upright and plug it into the network.
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
6
Your Phone
- Quick Links:
- Phone Setup
Hide quick links:
Advertisement
Table of Contents
