This document will guide you through the basic installation process for your new D-Link
VoIP Gateway
DVG-6004S
2017 D-Link Corporation. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and speci cations
subject to change without notice. DVG-6004S FXO VoIP Gateway
This document will guide you through the basic installation process for your new D-Link VoIP Gateway DVG-6004S 2017 D-Link Corporation. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and speci cations subject to change without notice. DVG-6004S FXO VoIP Gateway...
A blinking light indicates the VoIP Gateway is attempting Prov. C. Insert one end of the phone cable to the line port on the rear panel of the DVG-6004S. to connect to the Provisioning server. Attach the other end of the provided phone cable to your original telephone line on the wall jack.
Click Login to enter web site. Select your Internet connection type: DHCP - Most Cable ISPs or if you are connecting the DVG-6004S behind a router. Static IP - Select if your ISP supplied you with your IP settings. PPPoE - Most DSL ISPs.
Setup is nished. Check the summary of your settings. To make new settings Reset button (with restore factory default function) e ective, you must click on the Restart button to reboot the DVG-6004S. Front Panel LED: Power, Alarm, Register, WAN, LAN and FXO port Click Restart.