Cisco Wideband Sip Physical Specifications; Cisco Wideband Sip Leds - Cisco uBR10012 Hardware Installation Manual
Universal broadband router sip and spa
Hide thumbs
Also See for uBR10012:
- Hardware installation manual (280 pages) ,
- Software configuration manual (240 pages) ,
- Troubleshooting manual (86 pages)
Table of Contents
Advertisement
Overview of SPA Interface Processors
Cisco Wideband SIP Physical Specifications
Table 9: Cisco Wideband SIP Physical Specifications
Description
Physical dimensions
Shipping weight
Operating temperature
Storage temperature
Relative humidity
Cisco Wideband SIP LEDs
The figure below shows the Cisco Wideband SIP faceplate, which has two Cisco Wideband SPAs and two
blank filler plates. The Cisco Wideband SIP has one LED on the faceplate.
Figure 1: Cisco Wideband SIP Faceplate
The Cisco Wideband SIP FAIL LED is in ON state by default and is turned off by software after basic board
functionality has been verified. If the FAIL LED remains on, it indicates that the processor has failed to
initialize properly.
Specifications
The SIP occupies two full-height slots (either 1/0 and 2/0, or 3/0 and 4/0) and
can be operated in a Cisco uBR10012 router.
10 lb (4.54 kg)
41°F to 104°F (5°C to 40°C)
Short-term operating temperature is limited to 131°F (55°C) in compliance
with Bellcore GR.
-4°F to 149°F (-20°C to 65°C)
Operating—nominal: 10% to 85%
Operating—short term: 10% to 90%
Storage: 5% to 95%
Cisco uBR10012 Universal Broadband Router SIP and SPA Hardware Installation Guide
Cisco Wideband SIP Physical Specifications
11
Advertisement
Table of Contents
