Cisco ASA 5585-X Maintenance Manual page 7
Maintenance and upgrade procedures
Hide thumbs
Also See for ASA 5585-X:
- Quick start manual (6 pages) ,
- Cli configuration manual (2164 pages) ,
- Configuration manual (429 pages)
Advertisement
Chapter 4
Maintenance and Upgrade Procedures
Figure 4-4
named GigabitEthernet 0/0 through GigabitEthernet 0/19.
Figure 4-4
1
GigabitEthernet 00 through 07
Caution
Be sure the ASA software version installed on your ASA 5585-X supports the network I/O modules and
the accompanying SFP/SFP+ transceivers. Refer to
Table 4-1
Table 4-1
1G SFP Module
GLC-SX-MM
GLC-SX-MMD
GLC-LH-SM
GLC-LH-SMD
GLC-EX-SMD
GLC-T
10G SFP+ Module
SFP-10G-ER
SFP-10G-SR
SFP-10G-LRM
SFP-10G-LR
SFP-H10GB-ACU7M
SFP-H10GB-ACU10M
OL-22567-02
shows the port numbering for the 20-port network I/O module. For slot 0, the interface is
20-Port Network I/O Module Port Numbering
1 9
1 8
1 7
1 6
1 5
1 4
1 3
1 2
2
lists the SFP/SFP+ transceiver modules supported by the ASA 5585-X.
SFP/SFP+ Transceiver Modules
Cisco ASA 5585-X Adaptive Security Appliance Hardware Installation Guide
Installing and Removing Cisco ASA 5585-X Network I/O Modules
C is c o
A S A 5
1 1
1 0
9
8
7
6
5
4
1
2
GigabitEthernet 08 through 19
Cisco ASA Compatibility
1000 Base-SX SFP module
1000BASE-SX short wavelength, with DOM
1000 Base-LX/LH SFP module
1000BASE-LX/LH long-wavelength, with DOM
1000 Base-EX SFP module, SMF, 1310nm, DOM
1000BASE-T standard
10G ER SFP+ module
10G SR SFP+ module
10G LRM SFP+ module
10G LR SFP+ module
10GBASE-CU SFP+ Cable 7 Meter, active
10GBASE-CU SFP+ Cable 10 Meter, active
5 8 5 - X
2 0 - P o r
t G E M
o d u le
3
2
E J E C T
1
0
P W R S
T A T U S
for more information.
4-7
Advertisement
