Cisco ASA 5585-X Maintenance Manual page 32

Maintenance and upgrade procedures

Hide thumbs Also See for ASA 5585-X:

Chapter 4

Maintenance and Upgrade Procedures

Installing and Removing a Slide-mounted Chassis

Figure 4-27

Square Studs for Square Hole Post

Secure the slide rail to the rack post with the provided #10-32 screws by tightening the screws at the

Step 2

front and rear end of the slide rail to the rack post

(Figure

4-28). Both front and rear rack posts must be

secured with the screws before you install the chassis.

It is critical that the screws are installed and secured to the front and rear end of the slide rails.

Caution

The rack opening (the distance from the front to back rack uprights) should be between 26.5 and

Note

38 inches.

Cisco ASA 5585-X Adaptive Security Appliance Hardware Installation Guide

4-32

OL-22567-02

Table of Contents