Cisco Unified Access CT5760 Deployment Manual page 10

Web gui

Table of Contents

Configuration Examples

Creating a WLAN—You can create a WLAN in this screen. It is disabled by default. Create an 802.1x

Step 10

WLAN name. In this example, it is NGWC1-1x.

Enabling 802.11 Radios—Radios were disabled once the country code was changed in earlier steps.

Step 11

Enable the radio by checking th 802.11a/n and 802.11 b/g/n check boxes.

Step 12

Time Settings—You can choose between two modes: Manual and NTP. In the following example, choose

NTP and use 10.10.10.1 as the NTP Server IP Address.

Save and apply the Wizard

Step 13

Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2

Table of Contents

Catalyst 3850