Table of Contents
Advertisement
Chapter 1
Overview
Table 1-1
Catalyst 2900 Series XL Modules Features (continued)
Module
WS-X2914-XL-V
(4 10/100 UTP ports)
WS-X2922-XL-V
(2 100BaseFX ports)
WS-X2924-XL-V
(4 100BaseFX ports)
1. Catalyst 2900 Series XL modules support the relevant IEEE 802.3x, IEEE 802.3z, or IEEE 802.3ab protocols appropriate for
that module.
10BaseT/100BaseTX Module
78-5912-03
Feature
Support for Catalyst 2900 XL series Cisco IOS Release 12.0(5)XU or later
•
Gigabit EtherChannel support
•
Gigabit Interface Converter (GBIC) field-replaceable interface for
•
Catalyst 2931XL 1000BaseSX and 1000BaseLX/LH modules
IEEE 802.3x, 802.3z, and 802.3ab compliant
•
All switched ports
•
Autonegotiation of speed and duplex on the 10BaseT/100BaseTX module
•
Per-port data rates of up to 200 Mbps in full-duplex mode
•
Hot-swappable
•
Management through an SNMP management station, the Cisco IOS
•
command-line interface (CLI), or the web-based Visual Switch Manager
(VSM)
Fast EtherChannel support on all ports
•
IEEE 802.1Q virtual LAN (VLAN) trunk support
•
ISL trunk support
•
Up to 8192 MAC addresses on each modular switch
•
Support for Catalyst 2900 XL series Cisco IOS Release 11.2(8)SA4 or
•
later
The10BaseT/100BaseTX module, hereafter referred to as the 10/100 module, has
four switched 10/100 autosensing ports. The ports can autonegotiate the
transmission speed, or they can be set to 10 Mbps or 100 Mbps. Ports can also be
set to half duplex, full duplex, or autonegotiate. Figure 1-1 shows the 10/100
module.
Catalyst 2900 Series XL Modules Hardware Installation Guide
Key Features
1
1-3
Advertisement
Table of Contents
