Default Login; Configuring The Switch - Cisco Nexus 5500 Series Configuration Manual
Nx-os fundamentals configuration guide,
release 7.x
Hide thumbs
Also See for Nexus 5500 Series:
- Hardware installation manual (142 pages) ,
- Command reference manual (460 pages) ,
- Command reference manual (378 pages)
Table of Contents
Advertisement
Initial Configuration
To enable this service, select the type of SSH key (dsa/rsa/rsa1) and number of SSH key bits (768 to
2048).
• NTP server IPv4 address (optional).
• SNMP community string (optional).
• Switch name (optional).
This is your switch prompt.
• An additional login account and password (optional).
If you are using IPv4, be sure to configure the IPv4 route, the IPv4 default network address, and the IPv4
Note
default gateway address to enable SNMP access.
Default Login
The switch has the network administrator as a default user (admin). You cannot change the default user at
any time.
There is no default password so you must explicitly configure a strong password. If a password is trivial (short,
easy-to-decipher), your password configuration is rejected. Be sure to configure a strong password. If you
configure and subsequently forget this new password, you have the option to recover this password.
If you enter the write erase command and reload the switch, you must reconfigure the default user (admin)
Note
password using the setup procedure.
Configuring the Switch
This section describes how to initially configure the switch.
Note
Press Ctrl-C at any prompt to skip the remaining configuration options and proceed with what you have
configured up to that point. However, entering the new password for the administrator is a requirement
and cannot be skipped.
Tip
If you do not want to answer a previously configured question, or if you want to skip answers to any
questions, press Enter. If a default answer is not available (for example, switch name), the switch uses
what was previously configured and skips to the next question.
To configure the switch for first time, follow these steps:
Cisco Nexus 5500 Series NX-OS Fundamentals Configuration Guide, Release 7.x
22
Using the Cisco NX-OS Setup Utility
OL-30890-01
Advertisement
Table of Contents
