Table of Contents
Advertisement
Setup > Interface
DRAFT - 6/25/2010
Setup > Interface
WAN Interface Setup
WAN Connection Settings
Network Type: Choose your WAN interface type from the dropdown list. Options include
Auto-Detection, MoCA, and Ethernet.
• Auto Detection: The router detects physical interface automatically and determine
the connection type. The detect result is displayed in "Current Network" field;
• MoCA: You can manually configure MoCA connection as physical interface.
• Ethernet: You can manually configure the layer 2 network as Ethernet WAN connection
Current Network: Indicates whether the current WAN connection is MoCA or Ethernet
WAN, and whether the connection is manually configured or auto-detected.
Ethernet WAN settings
Set Connection Shaping:
bandwidth. Options include No Shaping, Auto(link speed) and Manual.
MoCA WAN settings
Channel:
Allow the router to detect an available frequency for your MoCA WAN, or choose
a channel frequency.
Node Type:
Allow the router to detect your node type, or choose the correct option.
Auto-Detect privacy:
Choose this option if you want to enable privacy auto detection.
MoCA Privacy:
Choose this option if you want to enable privacy on your MoCA WAN
connection.
Password:
If you chose to enable privacy on your MoCA WAN, enter your password here.
Power Limit:
Allow the router to set the limit for the transmission power on your MoCA
WAN, or choose a percentage of power to use as a limit.
MoCA LAN Setup
MoCA LAN Settings
Channel:
Allow the router to detect an available frequency for your MoCA LAN, or choose
a channel frequency.
MoCA Privacy:
Choose this option if you want to enable privacy on your MoCA LAN
connection.
Password:
If you chose to enable privacy on your MoCA LAN, enter your password here.
Power Limit:
Allow the router to set the limit for the transmission power on your MoCA
WAN, or choose a percentage of power to use as a limit.
Choose whether you want the router to smooth the ethernet
9
Advertisement
Table of Contents
