Page 1
Bosch Smart Home Door/Window Contact Instruction Manual...
Page 2
You can also use the explanatory video on our website to help you ▶ Start the Bosch ▶ Select “Add device” ▶ Scan the QR code install your Bosch Smart Home Door/Window Contact more easily: Smart Home App and follow www.bosch-smarthome.com/installation...
Page 3
You will be able to use the Bosch Smart Home App to quickly and easily identify open windows or doors even when you are away from home. It will also cause radiators to be turned down auto- matically when a window is opened or trigger an alarm if a door or window is opened when you are not at home.
(see p. 40) radiators to be turned down auto- to date once connected to the Bosch ▶ Follow the safety instructions and the ▶ Avoid installing in areas prone matically if a window is opened, and Smart Home System.
2.0 IN THE BOX To operate the Door/Window Contact you will require the app, a Controller Door/Window Magnet unit Spacker 4 screws 2 adhesive strips 2 AAA batteries and an internet connection.
3.0 WARNING NOTICES 3.2 Safety instructions 3.1 Explanation of symbols Warning. Proper handling of batteries This alerts you to danger. ▶ Take the batteries out of the device if it is not used for a prolonged period of time. ▶ The enclosed batteries are not suitable for charging. Info.
4.0 THE DOOR WINDOW CONTACT Item Part Explanation 4.1 Product overview Indicator for status and errors Top section Fault Orange Process or update is being performed Top section Status display “on”; Process or update Green has been completed successfully (inside view) Battery com- –...
For assistance with installing your Bosch Smart Home Door/Window Please ensure that you have a Bosch Smart Home Controller and Contact, you may also refer to the explanatory video on our website: the Bosch Smart Home App, and that you have set both of them up www.bosch-smarthome.com/installation successfully.
5.1 Installation Start the Bosch Smart Home App and select “Add device”. The app will prompt you to scan the You will find the QR code on the inside From this point, the app guides you through QR code on the product. Open the of the bottom section of the Door/Win- the installation process.
5.2 Inserting the batteries Insert the batteries into the battery Then close the battery compartment Now the app guides you through compartment. Ensure they are installed again. the installation process. You will in the correct orientation. find a detailed description in this instruction manual.
5.3 Configuring the device Confirm the batteries have been The Door/Window Contact’s LED If the device is not able to establish a connection to the Controller inserted in the app. The Door/Window indicates the status of the configura- within 3 minutes, the configuration mode is ended. To start the Contact will now try to connect to your tion attempt using the following flash configuration mode again, please press the system button on the...
6.0 FIXING 6.1 Mounting location Do not fit your Door/Window Contact to the hinge side of the window! It could be damaged when the window is opened. Please fit the Door/Window Contact with the LED facing down. The magnet to the upper part of the window frame unit is fitted to the window sash.
6.2 Mounting instruction Make sure that the Door/Window Contact and the magnet unit are flush (using the enclosed spacer where necessary) and that the bottom The distance between magnet unit and edges are level. If correctly aligned, the LED will Door/Window Contact must be no more flash briefly.
6.3 Fixing with adhesive tape Mounting the Door/Window Maintain the minimum Observe the mounting Contact distance to the surroundings instructions on pages 26 ▶ Fit the adhesive strip to the rear side (1.5 cm) when mounting and 27. of the Door/Window Contact’s bot- the Door/Window Contact tom section and peel off the second so that it can still be slid...
Page 16
Mounting the magnet unit with If everything is correctly Observe the mounting spacer aligned, the LED in the de- instructions on pages 26 ▶ Fit the adhesive strip to the rear vice will flash briefly. and 27. side of the spacer and peel off the second protective film ▶...
Page 17
Mounting the magnet unit without If everything is correctly Observe the mounting spacer aligned, the LED in the de- instructions on pages 26 ▶ Fit the adhesive strip to the rear side vice will flash briefly. and 27. of the magnet unit and peel off the second protective film ▶...
6.4 Fixing with screws Mounting the Door/Window ▶ Drill the holes Contact ▶ Position the bottom section over the ▶ Separate the battery compartment holes and screw it on tight. Use the from the bottom section of the short screws to do this Door/Window Contact ▶...
Page 19
Mounting the magnet unit with ▶ Put the magnet unit on the spacer Observe the mounting spacer and screw the magnet unit and instructions on pages 26 ▶ Hold the spacer in the required spacer onto the window frame. Use and 27.
Page 20
Mounting the magnet unit without ▶ Drill the holes Observe the mounting spacer ▶ Position the magnet unit over the instructions on pages 26 ▶ Open the lid of the magnet unit holes and screw the magnet unit and 27. ▶...
7.0 MAINTENANCE AND CARE Incorrect handling (see notes on intended use) or non-observance The product is maintenance-free. of hazard warnings may compromise the protection afforded by the Repairs should only be performed by device. qualified persons. Clean the product with a soft clean dry and lint-free cloth. Do not use cleaning agents containing solvents.
8.0 PRODUCT DETAILS Duty cycle At 868.3 MHz < 1 % per h 8.1 Technical data At 869.525 MHz < 10 % per h Protection class IP20 Device type name Contact AA Ambient temperature 5 °C to 50 °C Batteries 2 ×...
GmbH declares that the radio equip- conformity is available at the following electric motors or defective electrical characteristics, environmental influ- ment type Bosch Smart Home Door/ internet address: devices) cannot be ruled out. The ences such as humidity and structural www.bosch-smarthome.com/...
8.4 Open-source software core_cm3.h This Bosch Smart Home product uses open-source software. You will find Copyright (C) 2009-2013 ARM Limited. All rights reserved. Redistribution and the license information for the compo- use in source and binary forms, with or without modification, are permitted nents used on the opposite side.
8.5 Environmental protection and disposal THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIB- Electrical and electronic equipment To dispose of electrical and electronic UTORS „AS IS“ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, that is no longer usable and defective equipment or batteries, use your BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY or used batteries must be separated...
Door/Window Contact in the online FAQs at #BeSmarter #BeSmarter www.bosch-smarthome.com/faq Sale and transfer Before you transfer or sell your device, delete your personal information. To do this, reset the device to its factory settings (see online FAQs).
Page 28
INTERCONNECTED SMART HOME PRODUCTS Save on heating costs, protect your valuables, create mood lighting and much more: Bosch Smart Home offers a complete, intelligent system to make your life more comfortable, safer and more sustainable. More at www.bosch-smarthome.com Radiator Thermostat...
Page 29
Robert Bosch Smart Home GmbH Schockenriedstraße 17 70565 Stuttgart, Germany 00800 8437 6278 (free) Mon–Fri 7:00 a m –8:00 pm 8:00 a m –6:00 pm service@bosch-smarthome.com...