hit counter script

Cisco Rps 2300; Ac Power Connector; Power Supply Modules (Applies To The Catalyst 6800Ia-48Fpdr Switches) - Cisco Catalyst 6800IA Hardware Installation Manual

Table of Contents

Advertisement

AC Power Connector

Attach only the following Cisco RPS model to the RPS receptacle: RPS2300. Statement 370
Warning
Connect the switch and the redundant power system to different AC power sources.
Use this cable for the RPS: CAB-RPS2300-E.

Cisco RPS 2300

The Cisco RPS 2300 is a redundant power system that can support six external network devices and provide
power to one or two failed devices at a time. It senses when the internal power supply of a connected device
fails and provides power to the failed device, preventing loss of network traffic. For more information, see
the Cisco Redundant Power System 2300 Hardware Installation Guide on Cisco.com at this URL:
www.cisco.com/en/US/products/ps7148/prod_installation_guides_list.html
The Cisco RPS 2300 has two output levels: –52 V and 12 V with a total maximum output power of 2300 W.
All supported and connected switches can simultaneously communicate with the RPS 2300. You can configure
these RPS 2300 features through the switch software:
• Enable RPS active or standby mode for each connected switch
• Configure switch priority for RPS support
• List the connected switches and the power-supply module sizes
• Obtain reports when a switch is powered by the RPS
• Obtain status reports for the RPS power-supply module
• Read and monitor backup, failure, and exception history
AC Power Connector
Note
This applies to the Catalyst 6800IA-48FPD and Catalyst 6800IA-48TD switches.
The switch is powered through the internal power supply. The internal power supply is an autoranging unit
that supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to plug it into an
AC power outlet.

Power Supply Modules (Applies to the Catalyst 6800IA-48FPDR Switches)

The switch operates with either one or two active power supply modules. You can use two AC modules, or
one module and a blank cover.
Table 12: Power Supply Model Numbers and Description
Part Number
PWR-C2-1025WAC=
Catalyst 6800IA Switch Hardware Installation Guide
14
Description
1025-W AC power supply module.
Product Overview
http://
OL-30278-02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6800ia

Table of Contents