Charge the handset batteries for 7 hours before initial use. Please read these Operating Instructions before using the unit and save for future reference. For assistance, visit our website: http://www.panasonic.com/help for customers in the U.S.A. or Puerto Rico.
10. Never push any objects through INSTRUCTIONS slots in the product. This may result in the risk of fire or electric shock. Never spill any liquid on the product. For assistance, please visit http://www.panasonic.com/help...
Page 3
Confirm that smoke disconnect device. Ensure that the has stopped emitting and contact the AC outlet is installed near the product Panasonic Call Center at 1-800-211- and is easily accessible. PANA (1-800-211-7262). L Do not spill liquids (detergents, Battery cleansers, etc.) onto the telephone...
5 °C (41 °F) The base unit and other compatible or greater than 40 °C (104 °F). Damp Panasonic units use radio waves to basements should also be avoided. communicate with each other. L The maximum calling distance may...
Page 5
TG823X_Shinsei.book Page 5 Monday, April 23, 2007 6:03 PM Move away from the electrical appliances. Routine care L Wipe the outer surface of the product with a soft moist cloth. Do not use benzine, thinner, or any abrasive powder. For assistance, please visit http://www.panasonic.com/help...
Page 6
– Caller ID features do not function line jack (A). Connect the AC adaptor properly. cord (B) by pressing the plug firmly (C). L Use only the supplied Panasonic AC adaptor PQLV207. To single-line telephone Hook jack (RJ11C)
Attention: A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY (1-800- 822-8837) for information on how to recycle this battery. For assistance, please visit http://www.panasonic.com/help...
When the batteries are fully charged, “Charge Completed” will be displayed. Base unit Charger *1 The pictured model is KX-TG8231. *2 KX-TG8232 Note: L It is normal for the handset to feel warm during charging. L If you want to use the unit immediately, charge the batteries for at least 15 minutes.
Page 9
F Headset jack indicator G Dial keypad I {V} (VOL.: Volume) H {FLASH} {CALL WAIT} J x (LOCATOR) I Receiver K {8} (SKIP) J Display K {OFF} L {MUTE} M {INTERCOM} {TRANSFER} N Microphone O Charge contacts For assistance, please visit http://www.panasonic.com/help...
L You can also answer the call by pressing any dial key from {0} to {9}, {*}, {#}, or {INTERCOM}. (Any key talk feature) When you finish talking, press {OFF} or place the handset on the base unit or charger. For assistance, please visit http://www.panasonic.com/help...
{s} lights up. When finished, press {OFF}. Using the handset Note: L To switch to the receiver, press {C}. {MENU} (center of joystick) i I i {OK} {V}/{^}: “Answer on” or “Answer off“i {OK} i {OFF} For assistance, please visit http://www.panasonic.com/help...
US:AAAEQ##TXXXX. The digits line, ensure the installation of this represented by ## are the REN equipment does not disable your alarm without a decimal point (e.g., 03 is a equipment. If you have questions For assistance, please visit http://www.panasonic.com/help...
Page 13
TVs and VCRs. be ensured when using this phone. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If For assistance, please visit http://www.panasonic.com/help...
Page 14
ENERGY STAR ® As an NERGY Participant, Panasonic has determined that this product meets the NERGY guidelines for energy efficiency. NERGY TAR is a U.S. registered mark. For assistance, please visit http://www.panasonic.com/help...
Page 15
L Send the unit to Panasonic Service and Technology Company Customer Service Center, prepaid and adequately insured. L Do not send your unit to Panasonic Consumer Electronics Company listed below or to executive or regional sales offices. These locations do not repair consumer products.