Figure 37. Opening the front-access storage enclosure cover
3. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the front-
access storage enclosure.
Figure 38. Removing the bracket from the front-access storage enclosure
4. To remove the 2.5-inch storage drive, do the following:
a. Flex both sides of the bracket to remove the 2.5-inch storage drive from the bracket.
Figure 39. Removing the 2.5-inch storage drive from the bracket
1
b. Lift the tab
of the metal bracket and push the metal bracket with force as shown. Then slide the
bracket and remove it from the plastic frame.
86
P320 Hardware Maintenance Manual