Table of Contents
Advertisement
Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and
password. This option is typically used for DSL services.
My Internet
Select L2TP. (Username/Password). from the drop-down
Connection:
menu.
Advanced DNS
Check the box to enable advanced DNS service.
Service:
Address Mode: Here the user can specify whether this Internet connection
requires the use of a dynamic or static IP address. L2TP usual
requires a dynamic IP configuration.
L2TP IP Address: Enter the L2TP IP address used here. This option is only avail-
able if Static.IP is selected.
L2TP Subnet Mask: Enter the L2TP subnet mask used here.
L2TP Gateway IP
Enter the L2TP gateway IP address used here.
Address:
L2TP Server IP
Enter the L2TP server IP address used here. This is normally
Address:
the same a the L2TP gateway IP address.
Username: Enter the L2TP username used here.
Password: Enter the L2TP password used here.
Verify Password: Re-enter the L2TP password used here.
D-Link DIR-808L User Manual
Internet Setup
L2TP
37
Advertisement
Table of Contents
